Tag Archives : Tech2


How do I use GM TECH2 to replace Opel Corsa C ECU   Recently updated !

This article is just sharing real experience when use GM Tech 2. Hope this helps someone. I decided to invest in some tools to diagnose my Opel. After a couple weeks of searching all over ebay, aliexpress and other online store, I finally found the cheapest one on obd2tool.com, they […]

10-3

5-2

GM Tech II Saab card not find Bus ECU but GM card Solution   Recently updated !

Car model and year: ’03 Saab 9-3 Tools I own: I finally decided to order a clone from seller Obd2tool.com. It arrived this week (Monday), complete with all of the bits and pieces it was supposed to have, including a Saab card and a GM/Chev card. I bought GM Tech2 $252 […]


How Sleek is Maxisys Pro Full Auto Diagnostic System

1.Smart Screen: Autel Maxisys Pro MS908P comes with a whopping 9.7 inches IPS LED-backlit capacitive touch-screen with resolutions of 1024 x 768 pixels. As a result, it provides ultra-clear display of contents, to the users, with glossy wide-screen. The screen also supports multi-touch. You can use up to 5 touches at […]


5-4

How to use GM MDI interface for programming   Recently updated !

GM has had its newest programming/J2534 Pass Thru device on the market for some years now. A lot has been said about it and I am here to tell you that I have finally taken the plunge into GM MDI in, pretty much, all of its aspects. I decided after […]


Tech 2 Saab scanner disable seat belt reminder   Recently updated !

How to disable the seat belt reminder using a Professional Diagnostic Tool Tech 2 clone scan tool? Follow the instruction below step by step. Hope it helps. You need a HQ GM Tech 2 clone. Connect it to the vehicle and power on. Select your Saab model then select all. Make […]


How to: ABS Automated bleed by TECH2 GM   Recently updated !

This post is about how to do ABS Automated bleed by GM Tech 2. Wish it helps most of you. Car model and year: C5 Corvettes 1997 – 2004 Tool to use: GM TECH2 with the factory service manual Purpose: I want to flush my system this winter and have […]


Advise on C5 Corvettes 1997 – 2004 scan tools   Recently updated !

Some owners/technicians are considering purchasing scan tools for C5 Corvettes, but have no ideal which one is working and cheap. Here I advise two commonly-used GM scan tools including GM Tech2 clone and Bluetooth OBD2 adapter with Torque app, and with some experienced users’ reviews. Advise on GM Tech2 clone You […]


Engine?Control?Module Recovery by GM MDI or Tech 2   Recently updated !

This is step-by-step instruction on how to do engine control module recovery on Cadillac cars. modules tested successfully with the tools and guide below: 2009 Buick?Enclave 2007-2009 Cadillac CTS, SRX, STS 2009 Chevrolet Traverse 2007 GMC Acadia 2009 GMC Acadia 2007 Saturn OUTLOOK 2009 Saturn OUTLOOK Diagnostic tool: GM MDI […]


06 Chevrolet program key fobs using GM TECH2 with 32MB card and CANdi module   Recently updated !

This post is on 2006 Chevrolet program key fobs using GM Tech2 with 32MB card and CANdi module. Car model and year: 2006 Chevrolet Purpose: Program Key Fobs Tool to use: Tech 2 GM Scan Tool with  GM Tech 2 32MB Memory card (updated) and the CANdi module (as cheap as […]