Tag Archives : Tech 2 Programmer


How do I use GM TECH2 to replace Opel Corsa C ECU   Recently updated !

This article is just sharing real experience when use GM Tech 2. Hope this helps someone. I decided to invest in some tools to diagnose my Opel. After a couple weeks of searching all over ebay, aliexpress and other online store, I finally found the cheapest one on obd2tool.com, they […]

10-3

5-2

GM Tech II Saab card not find Bus ECU but GM card Solution   Recently updated !

Car model and year: ’03 Saab 9-3 Tools I own: I finally decided to order a clone from seller Obd2tool.com. It arrived this week (Monday), complete with all of the bits and pieces it was supposed to have, including a Saab card and a GM/Chev card. I bought GM Tech2 $252 […]


How Sleek is Maxisys Pro Full Auto Diagnostic System

1.Smart Screen: Autel Maxisys Pro MS908P comes with a whopping 9.7 inches IPS LED-backlit capacitive touch-screen with resolutions of 1024 x 768 pixels. As a result, it provides ultra-clear display of contents, to the users, with glossy wide-screen. The screen also supports multi-touch. You can use up to 5 touches at […]


5-4

How to use GM MDI interface for programming   Recently updated !

GM has had its newest programming/J2534 Pass Thru device on the market for some years now. A lot has been said about it and I am here to tell you that I have finally taken the plunge into GM MDI in, pretty much, all of its aspects. I decided after […]


How to use GM Tech2 scan tool for Chevrolet C5 diagnostic   Recently updated !

GM Tech2 is a diagnostic tool for the most part. It can be used to program out/in certain RPO’s in the BCM and can be used to bleed the ABS brake system without introducing air into the system. The extent to which it can be used to tune a Chevrolet C5 […]

1-4

10-6

GM Tech 2   Recently updated !

Authentic GM software puts you in the driver’s seat to fix GM vehicles right the 1st time. Tech 2 is loaded with features: The large, easy-to-read, back-lit screen is the first feature you’ll notice. * Graphic screen displays both test and graphics, and is capable * of showing nine sensors […]


How to Connect the Tech 2 to a Computer Terminal   Recently updated !

Follow the steps below and refer to the follow picture, which illustrates the typical Tech 2 Scan Tool connection to a computer terminal. 1.  Plug the serial port adapter (P/N TA00040) into the serial port marked “A” or “1” on the back of the computer terminal or to the USB […]

5-4

how to fix Tech2 reports SAAB mass airflow deviation issue P0101   Recently updated !

MY GM Tech 2 Diagnostic Scan Tool has reported this issue for a while. My car has been throwing a mass airflow deviation code sporadically while driving. I reset my ecu, drive around for a while but the code will pop up again. When it throws the code the ecu also […]


GM Tech2 Vetronix Scanner Feedback Yes and NO (All Here)   Recently updated !

This article includes all GM Tech2 scanner Vetronix  clone feedback Yes and No list, aiming to help the GM technicians who are new to GM Tech2 Scanner. Before continuing reading, please note GM Tech II works not on truck; go for VXDIAG VCX HD for truck. GM tech2 Vetronix to […]

15-3

10-4

Free download GM TECH 2 TIS 2000 crack   Recently updated !

Here, i wanna share something interesting with you all. I happened to get the GM Tech2 Diagnostic Tool software TIS2000 dongle crack version from mh****forum. Usually, we users need buy TIS2000 dongle key for programming on saab cars It is said that it is for ANY TIS2000 the dongle crack and […]