Starting from version 14.02.56, a new feature called “Network Check” has been implemented in wiTECH. This feature can be accessed by selecting Help → Network Check option as depicted in the screenshot below:
Upon selecting the “Network Check” option, the “Network Check” utility window will appear as shown in the screenshot below:
This new feature will enable the user to check whether the PC in which the wiTECH Diagnostic Application runs, has been able to connect to the required web-sites for
* Automatic software updates.
* Receive software updates in a silent mode.
* Diagnostic Tools registration.
* Data recordings and various reports upload.
* Smooth functioning of wiTECH Diagnostic Application.
To run the “Network Check” utility, please click on the “Start Network Check” button as shown in the screenshot below:
Network Check will test the following sites to confirm they are available from your network.
If any of the web-sites listed above in the screenshot is not available, you may experience issues with the wiTECH application functions/features listed above.
The “Network Check” feature is also available from witech2 “Standalone Mode” by accessing Help → Network Check option.
If you are not getting an automated wiTECH Diagnostic Application update prompt or receiving a device registration warning despite your device is registered, you can run the “Network Check” utility to confirm you have access to the required web-sites/domains.
NOTE: All wiTECH users should have network access to Obd2tool.com and all of its sub-domains as trusted sites.
Leave a Reply