Tag: wiTech MicroPod 2

Can wiTech Micropod2 Work 2018+ FCA Models

As titled, Can we dial with Chrysler (Dodge Jeep)  2020 2021 models with the Microod2 China clone wiTECH 1.0 (17.04.27)? Here are some clues. 2018 + FCA cars have new ecu SGW which need to be unlocked online WITECH 2.0 for diagnostic session or need to bypass SGW.  wiTECH 1.0

How-to Setup a VCI for wiTECH 2

DESCRIPTION If your dealership purchased a new Vehicle Communication Interface (VCI) device or you would like to convert your existing VCI for using with wiTECH 2.0 System, you need to download and install the VCI Setup Utility to configure/setup your VCI for wiTECH 2.0. IMPORTANT : You will need to

wiTECH Micropod 2 DRB III wiTECH 2 Scan Tool Download and Complete Info

wiTECH Micropod 2 is the next generation of witech vci pod. Chrysler Micropod 2 diagnostic and programming interface provides 100% CAN coverage for Chrysler, Dodge, Jeep and Fiat.wiTECH Micropod 2 online version support online programming with online dealer account .Here,obd2tool.com share complete information about wiTECH Micropod 2. Obd2tool.com will share

Does your wiTech MicroPod 2 support FIAT 500L (BF)

Does your wiTech MicroPod 2 support FIAT 500L (BF) Answer: Yes, wiTech supports it. Part 1: Two Routines that Must Be Run Upon Arrival Part 2: Maintenance Light (Wrench Light) in EVIC Part 3: Programming a Key In detail… Part 1: FIAT 500L (BF) – Two Routines that Must Be Run

How to Diagnose Dodge RAM Cummins Engines with DRB III

SUBJECT: Connecting to the DRB III Emulator for Cummins Engines MODELS: 1998 – 2002 (BR) RAM Pickup 1998 – 2002 (BE) RAM Pickup/Quad Cab 2003 – 2005 (DR) RAM 1500/2500 Pickup NOTE: This bulletin applies to vehicles equipped with the 5.9L I6 Cummins 24V Diesel Engine (Sale Codes ETC) or

Witech Possible to Write VIN into 2015+ Dodge PCM?

Purpose: to perform a PCM replaced procedure to learn/synch the skim / write vins on a 2015+ Dodge. Question: I have a good quality Micropod II clone registered for online use with Witech 17. Is this possible? If yes, how? My micropod clone has firmware version 2.4 and is registered so

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

Notice: Please don’t connect the network when use it , or the hard disk will be damaged cant working !!! 1.Connect the hard disk with your laptop , start your laptop ( Please dont connect the network ) 2.If cant find the hard disk , or with blue screen ,

V17.03.01 wiTech MicroPod 2 technical suppport

Part 1: v17.04.27 wiTECH download link: Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack: Part 3: How to use MicroPOD II clone for auto key programming Part 4: How to fix wiTech MicroPod 2 V17.04.27 is not registered Part 5: Costomer Feedback Part 6: wiTECH MicroPod II

How to install DRBIII Emulator for Chrysler wiTech Micropod 2 on Windows 7 Pro 32-bit?

The procedure for installing DRBIII Emulator on Windows 7 Pro 32-bit: 1: Start with a fresh install of Windows 7 Pro 32-bit.   2: Install all the necessary drivers for your laptop.   3: Set the clock to the current date and time. (It didn’t work when set to 01/01/2017)  

Micropod 2 Clone on Chrysler WK & DS 2015

Reasons for the purchase: All of the dealers in my area don’t seem to know what they are doing. No problem with either of my vehicles is solved on the first visit and I normally have to guide the dealer mechanics to find issues. They are very nice but I