Tag: micropod ii

Can wiTech Micropod2 Work 2018+ FCA Models

As titled, Can we dial with Chrysler (Dodge Jeep)  2020 2021 models with the Microod2 China clone wiTECH 1.0 (17.04.27)? Here are some clues. 2018 + FCA cars have new ecu SGW which need to be unlocked online WITECH 2.0 for diagnostic session or need to bypass SGW.  wiTECH 1.0

How-to Setup a VCI for wiTECH 2

DESCRIPTION If your dealership purchased a new Vehicle Communication Interface (VCI) device or you would like to convert your existing VCI for using with wiTECH 2.0 System, you need to download and install the VCI Setup Utility to configure/setup your VCI for wiTECH 2.0. IMPORTANT : You will need to

wiTECH Micropod 2 DRB III wiTECH 2 Scan Tool Download and Complete Info

wiTECH Micropod 2 is the next generation of witech vci pod. Chrysler Micropod 2 diagnostic and programming interface provides 100% CAN coverage for Chrysler, Dodge, Jeep and Fiat.wiTECH Micropod 2 online version support online programming with online dealer account .Here,obd2tool.com share complete information about wiTECH Micropod 2. Obd2tool.com will share

How to Diagnose Dodge RAM Cummins Engines with DRB III

SUBJECT: Connecting to the DRB III Emulator for Cummins Engines MODELS: 1998 – 2002 (BR) RAM Pickup 1998 – 2002 (BE) RAM Pickup/Quad Cab 2003 – 2005 (DR) RAM 1500/2500 Pickup NOTE: This bulletin applies to vehicles equipped with the 5.9L I6 Cummins 24V Diesel Engine (Sale Codes ETC) or

V17.03.01 wiTech MicroPod 2 technical suppport

Part 1: v17.04.27 wiTECH download link: Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack: Part 3: How to use MicroPOD II clone for auto key programming Part 4: How to fix wiTech MicroPod 2 V17.04.27 is not registered Part 5: Costomer Feedback Part 6: wiTECH MicroPod II

Micropod 2 Clone on Chrysler WK & DS 2015

Reasons for the purchase: All of the dealers in my area don’t seem to know what they are doing. No problem with either of my vehicles is solved on the first visit and I normally have to guide the dealer mechanics to find issues. They are very nice but I

New “Network Check” feature in wiTECH Diagnostic Application

Description: Starting from version 14.02.56, a new feature called “Network Check” has been implemented in wiTECH. This feature can be accessed by selecting Help → Network Check option as depicted in the screenshot below: Upon selecting the “Network Check” option, the “Network Check” utility window will appear as shown in

How to Update the wiADVISOR microPod

In order to ensure the Micropod II is working properly, it will be necessary to update it based on the latest software releases provided by Chrysler. If your microPod is at version 0.4.2, it will not communicate with wiADVISOR. You must perform an update to version 1.2.2 using the USB cable