Tag: mb star diagnostic tool


Install batteries into the SD Connect C4 multiplexer

Mercedes SD Connect C4. Install the batteries. When installing batteries follow the correct polarity according to the image: It is recommended to operate the multiplexer SD Connect C4 with established internal batteries. Size AA Ni-Cd 1.2 V. the recommended capacity of 2400 — 2800 mA/h. The need for internal batteries

MB STAR HHT Internal Fault Diagnosis Multiplexer Code 10766

Problem: I bought the Mercedes Star Diagnostic SD connect C4 diagnostic system. I have installed the XDOS 2015.12V DAS Xentry on Dell D630 laptop, but it gave me two errors: Error 1: HHT-WIN display error “Internal fault Diagnosis multiplexer Code:10766” Error 2: Fault (1.2) Initialization of diagnosis multiplexer failed. Possible reason:

Why Choose MB Star Diagnostic 2019.5 Software

MB SD software has updated to 2019.5 version recently. This post will give you some information about 2019.5 software and tell you why we choose this product. Why Choose MB Star Diagnostic 2019.5 Software? *   2019.5 MB SD softwarecompatible with MB SD C4/MB SD C5 hardware. *   2019.5 MB SD

MB Star C3 2015.12V simdas.exe needs to close solution

One of Obd2tool.com customer had the “simdas.exe needs to close” and WIS error when running Mercedes Benz Star diagnosis C3 red multiplexer 2015.12V Dell format DAS. Problem: I had the these errors when i run MB Star diagnosis DAS: 1) simdas.exe has encountered a problem and needs to close. We are

DTS-Monaco and Vediamo, which better

DTS-monaco and Vediamo are added to MB Star C4 software since 12-2017. but what is DTS-monaco and what is Vediamo? And what\s the difference? Look here: What is DTS-monaco: DTS Monaco is universal Engineering Tester for Diagnostic and Control Functions of Vehicle ECUs. The name Monaco is derived from Modular Analyzer

2018. 03 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate XENTRY: Step 1: Double Check the icon name “starkey Center ” which on the computer desktop. Record the computer’s Hardware ID Step2: Double Check the folder”TOOLS” which on the computer desktop. Run xentry developer V1.10 Step3: As shown below: Enter