Tag: BMW Diagnostic Tool

BMW F10 DME Change and how to program successfully

Bought a new DME from BMW in Germany for a F10, installed it on the car and Run Ista+P to program it, everything went fine with the programming, once finished I tried to start the car but it does not start it only turns. I got the fault DME-CAS is


How to Solve BMW Z4 E89 Headlights not Raising to Proper Height

Car model and year: 2011 BMW Z4 E89 Problem and BMW scanner to use: the rear axis sensor is very near its low limit. Therefore my headlights are not raising to the proper operating height. When I start the car the lights dip and then return to the default low


Error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode (Solved)

Problem: I had error when programming BMW F32 in ISTA-P 4.19.13 Expert Mode. Vehicle programming with ISTA/P is no longer approved for the connected vehicle. Vehicle management is now only possible with ISTA 4. *Before version ISTA 4 it was called ISTA/D (aka Rheingold). It would cover diagnosis on all


How to Solve BMW ICOM Software ISTA-P Need Activation Key

BMW ICOM Software works for BMW ICOM Next and ICOM A2. Latest version of ICOM software is v2020.03, will update to 2020.3 soon. Some customers met a problem when open ISTA-P software and request password. OBD2TOOL will share tips to solve this problem today. BMW ICOM Software Overview Software Version: V2020.03 Operation

How to Enable ISTA+ V4.11 Expert Mode for Single Module Programming

Does anyone have a solution for Ista+ Programming Expert Mode? No expert mode available yet for ISTA+ v4.11.12. This will be an issue in feature, expert mode can get you out of unpleasant work. For example if you update i update a whole g11 with ista p and if you

How to solved the problem with ISTA and BMW m3 e36 of 96

Car model and year: BMW m3 e36 of 96 BMW diagnostic software to consider to use: ISTA + 3.53 Inpa cable Problem: From now on it is necessary to put the cursor of the interface on the D or the K knowing that it is of 96. I say DKan

Different between INPA and ICOM?

INPA just need a OBD II cable with any PC and it can run. Software can be download. The cable cost only $20 USD + cost of a laptop.For a ICOM Scanner, it need a software called ISTA. I know all the bmw model can be used with. The whole

how to distinguish the original bmw icom A2 software and fake ICOM A2

BMW ICOM A2+B+C is the best diagnostic tool for BMW car. 1. Super version BMW ICOM A2+B+C is compatible with many kinds of computers. 2. Once insert hard disk into your computer it can automatically install. 3. No request on computer system, and no time limiation for use. Q: Is it

How to Solve BMW ISTA+ 4.1 “Programming is not possible”

BMW ISTA+ for BMW diagnostic & programming function, BMW ISTA+ software compatible with BMW ICOM A2, ICOM Next & Enet cable, recently some users to help those with error “Programming is not possible” when using BMW ISTA+. Eobdtool.com share How to Solve BMW ISTA+ 4.1 “Programming is not possible” as following.

BMW E-Series Programming with ICOM ISTAP, not ISTA+

There are different systems for vehicle diagnosis (ISTA) and programming (ISTA/P) used. This means it was necessary to change systems several times when repairing a vehicle using software. ISTA+ has been expanded so that all the required programming functions for the series F, G and I are integrated. E-series vehicles