Autel MaxiIM IM608 “Please update firmware, otherwise it won’t work!”

September 26, 2021 Eva Autel Tools 0

Problem: after reset Italian Language for Autel MaxiIM IM608, it prompts ” Please update firmware, otherwise it won’t work!” (shown as the following image).

autel-maxiim-im608-please-update-firmware-01

The PC Suite program is downloaded from Autel.com and installed on the computer, when the program is open, it requires to upgrade XP400 firmware.

OBD2TOOL chief engineer replied:

Please use the immo data that I provided to perform the all key lost in the expert selection menu.

This is the firmware of the PC, connect XP400 to upgrade the firmware, when it is finished, click on “OK”.

Read this article on Autel XP400 firmware update guide.

autel-maxiim-im608-please-update-firmware-02

Good luck!

Related posts:

  1. NEW Oscilloscope & Inspection Camera Function!- Update Your Autel MaxiIM IM608 Today!
  2. Autel MaxiIM IM608 reviews on add key & all keys lost
  3. Autel MaxiIM IM608 review on FEMBDC BMW all keys lost
  4. Autel MaxiIM IM608 program a Keyless to Toyota Camry 2019 success

Be the first to comment

Leave a Reply

Your email address will not be published.


*