XTOOL X100 Pro3 Car Key Programmer is a professional key customization machine with 7 special functions OBD2/EOBD diagnostic function. It is an upgraded version of X100PRO2, which cancels the odometer change and adjustment function, but adds EPB, ABS and TPS reset functions, which can meet the needs of multiple car owners.
Xtool X100 Pro3 Powerful Functions
1. Main works for most of Europe, Asia, America, Australia Car Models Key Programmer
2. Xtool X100 Pro3 Complete OBD2 Functions:
Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
3. 5 Kinds of Special Reset Service Functions
Supported languages: German, English, Spanish,French, Italian, Polish, Russian.
How to Update XTOOL X100 pro3?
1. Go to the Xtool Official Website and go inside the X100 PRO3
2. Contact the X100 PRO3 with the Laptop
3. Download the Update helper then click the update for the newest software
How to back to normal when the device displays a white screen or no application? Just need two steps as following:
Step 1: Connect PRO3 to a Windows PC, find the memory card, and format it.
Step 2: Log in to the upgrade tool and click upgrade
(Attention! During the upgrade, please do not operate the key of the machine or disconnect the data line. After the upgrade prompt is successful, unplug the data cable and reconnect it.)
Comparison with Xtool X100 Pro2 key programmer:
XTOOL X100 Pro3 doesn’t support mileage correction/adjustment function, but it adds service functions as Oil、EPS、EPB、TPS、ABS. So great tool!
How to connect it to EEPROM adapter?
Following tools needed in the picture below:
Connection Demo Table:
Leave a Reply