06 Chevrolet program key fobs using GM TECH2 with 32MB card and CANdi module

This post is on 2006 Chevrolet program key fobs using GM Tech2 with 32MB card and CANdi module.

Car model and year:
2006 Chevrolet
Purpose:
Program Key Fobs

Tool to use:
Tech 2 GM Scan Tool with  GM Tech 2 32MB Memory card (updated) and the CANdi module (as cheap as $224 at obd2tool.com)

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-1.jpg

Procedure:
Install the GM Tech 2 scan tool
Turn ON the ignition with the engine OFF
Power On the Scan Tool
Click “Enter”
Main Menu > F0: DIAGNOSTICS

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-2.jpg

Vehicle identification – Model Year > (9) 2006

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-3.jpg

Vehicle identification – Product Type > Passenger Car

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-4.jpg
Vehicle identification – Product Make > (1) Chevrolet

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-5.jpg

Vehicle identification – Product Line > A

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-6.jpg

Diagnostics > F6: Body and Accessories

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-7.jpg

Vehicle identification – Service Categories > Keyless Entry

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-8.jpg

Body and Accessories > F5: Module Setup

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-9.jpg

Module Setup > F0: Body Control Module

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-10.jpg
Body Control Module > F0: Program Key Fobs

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-11.jpg

Program Key Fobs > F0: Invalidate all key fobs

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-12.jpg

Click “Continue”.

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-13.jpg

Click “Continue”.

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-14.jpg

Click “No” when get message “would you please program another key fob”

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-15.jpg

Procedure complete

http://forobd2tool.com/wp-content/uploads/2017/06/13/16-16.jpg

Be the first to comment

Leave a Reply

Your email address will not be published.


*