Category: Car Repair Software

Vehicles-Supported-by-GDS2-or-Tech2-Tech2Win

How to Install GM Tech2 TIS2000 CD

What the function of TIS2000 software CD? GM Tech 2 is a standalone scan tool mainly used for diagnostic function, but with the additional TIS2000 software dongle, it is possible to carry out ECU programming for GM vehicle models (after 2007). Operating system: A laptop with COM port running Windows

Saab-2008-9-3-Aero-TTid-with-a-fault-1 (2)

(Solved)Saab 2008 9-3 Aero TTid with a fault

Car model and year: Saab 2008 9-3 Aero TTid Errors: It won’t rev from cold at all for about a minute, then sound to pick up a bit and does fine. It has no power and will pull gently but then when pushed come up with limited performance. It also

xentry-1 (2)

How to fix V03/2020 MB SD C4 XENTRY “The data are faulty” problem

How to fix V03/2020 MB SD C4 Sofware “The data are faulty” problem in XENTRY Solution: 1.The error may be caused by clicking the upgrade icon to update the software. Please follow the instructions to fix it. Step 1: Free download a file from the following link. Xentrypatch202003: https://share.weiyun.com/5uIxwgI Password:eswr9a

DoIP W222 diagnosis SDconnect C4 or Xentry Connect C5

What for Mercedes DoIP W222 diagnosis? Looking for a Mercedes diagnostic tool, supports W222 model new DoIT system with DoIP complaint… You can have a SDconnect C4 (genuine better) or Xentry Connect C5 (clone or genuine..both ok) SD connect C4 DoIP: you need rework If you have an original SDconnect

How to Register New Keys on Mitsubishi Lancer 2008 with Mitsubishi MUT-3 diagnostic tool?

Tool:MUT-3 diagnostic tool Car model:Mitsubishi Lancer 2008 Procedures: Connect MUT-3 interface between Mitsubishi Lancer OBD port and PC,then run MUT-III SE software. Select “STV” After vehicle communication build,it will show you with the vehicle information as below Now you need select “KOS/IMMO/Keyless/TPMS” from System list,then click “OK” button Then click

Change-Measurement-System-on-Caterpillar-ET-Software-1

Change Measurement System on Caterpillar ET Software

How to Change Measurement System on Caterpillar ET Software? To change measurement systems in Windows 7/ 10: 1. Connect CAT ET Software to the ECM, Read More: How to Connect Caterpillar ET Software to the ECM 2. Select “Utilities – Preferences – Modify…” as Figure 1-1 above. 3. Select “Regional

Benz DTS Monaco

Benz DTS Monaco 8.14 8.08 Software Free Download

What is DTS Monaco? DTS Monaco Software is the official software used by Daimler-Benz development engineers.It is universal engineering test terminal for the Star Diagnostic and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic.DTS Monaco covers all the tasks

How-to-connect-the-ECM-by-CAT-Communication-Adapter-3

How to connect the ECM by CAT Communication Adapter 3

Test the Connection to the ECM Caterpillar Engines using CAT Communication Adapter 3 Toolkit Read More: How to Connecting Caterpillar ET Software to the ECM How to Connecting ALLISON Transmission using ALLISON DOC Software Use CAT Communication Adapter 3 Toolkit to test the connection between the CAT Communication Adapter 3