How to update VVDI2 software & firmware to version 6.1.0

(01-2019) vvdi2 6.1.0 update review with how-to’s: (thanks to Luis Villegas)

VVDI2-software-update-1
VVDI2-software-update-2

I just did the Xhorse VVDI2 programmer (software and firmware) and went fine

only thing I did different was saves as In DESKTOP once download it I close all the windows and ran the installation and overwrite all the old files

VVDI2-software-update-3

I remember it took s while. But mine its working. I just need to learn how to use  also i recall it was not detecting the VVDI2 i had to restart. But yes definitely install.

VVDI2-software-update-4

i updated on the VVDI2 program and selected link 1

VVDI2-software-update-5

Firmware update by the upgrade kit and Software i did by mega

*** 2018-01-07
*** Require firmware V6.1.0

===== VAG V6.1.0 =====
1. Immoprovement for MQB prepare dealer key
a). Support change MQB key ID(support GEKO online),require use VVDI proximity remote
b). Support save synchronize data when make key with working key
c). Support make dealer key with immo data and synchronize data while all key lost
2. VW MQB add new type: Dashboard version 0555, 0556
3. Immoprovement for autodetect VAG immobilizer system
Support some NEC24C32 TFT dashboard
Bugfix

===== BMW V6.1.0 =====
1. ECU /CAS ISN: Bugfix for change ISN for F series
2. FEM/BDC make key: Add new version, support car until 2018.11
3. FEM/BDC backup coding: Add new version, support car until 2018.11
4. Bugfix for MSV70 read ECU synchronize code(2 Bytes)
6. Bugfix

===== Porsche V6.1.0 =====
1. Bugfix

===== PSA V6.1.0 =====
1. Bugfix

===== Transponder Programmer V6.1.0 =====
1. Support generate MQB proximity remote: require use vvdi proximity remote and download latest remote database
2. Improvement for vvdi special transponder
3. Immobilizer data tool: Euro->BMW->motorcycle add new type
4. Immobilizer data tool: Euro->Iveco->Daily 93C56 bugfix
5. Immobilizer data tool: Asia->Isuzu->SX4 TC1762 bugfix
6. Immobilizer data tool: Asia->SAIC->Roewe750 add new type
7. Bugfix

===== Copy 48 (96 bits) V6.1.0 =====
1. Bugfix

===== J2534 V6.1.0 =====
1. Bugfix

===== Online Upate Tool V6.1.0 =====
1. Bugfix

===== Quick Start V6.1.0 =====
1. Bugfix

Repair BMW FRM Module Data with Yanhua Mini ACDP

Yanhua Mini ACDP FRM (Footwell module) adapter integrates data reading, writing, data conversion in one programmer. No need to write data from other cars and do coding. No need soldering. Very simple and efficient.

Example: BMW FRM data auto recovery

Procedure:

Connect the Mini ACDP device and BDM adapter with FRM unit. Backup data before operation.

Yanhua-Mini-ACDP-1

Yanhua-Mini-ACDP-2

Open Yanhua ACDP App

Select BMW->FRM Programming->ICP MC9S12XEQ384 MASK: 3M25J

Yanhua-Mini-ACDP-3

Yanhua-Mini-ACDP-4

Yanhua-Mini-ACDP-5

Select FRM Data Recovery (Automatic mode)

Yanhua-Mini-ACDP-6

Detect pins and probe connection

Yanhua-Mini-ACDP-7

Reading chip data

Yanhua-Mini-ACDP-8

Read and display chip data

Check the data. If reads D-Flash as 32K, the FRM module data is corrupted.
If reads EEPROM data as 4K , FRM module data is not corrupted.

Yanhua-Mini-ACDP-9

Uploading data

Auto saved D-flash to Yanhua Mini ACDP file folder

Yanhua-Mini-ACDP-10

Show programming data

Yanhua-Mini-ACDP-11

Verifying data

Yanhua-Mini-ACDP-12
FRM data recovery completed.

How to use CG-PRO to program Jaguar Land rover KVM key

Post is on how to use CG-Pro to program Jaguar Land rover KVM key perfectly in step by step procedure.

Part 1: Read out the data from smart computer and anti-theft computer.

Remove the smart computer and the IMMO box from the car.

cg-pro-1

BCM immo box

cg-pro-2

Image 2: Smart ECU RFA

Wiring according to the wiring diagram in the software, click on “Diagram” to follow.

cg-pro-3
BCM wiring diagram in the CG Pro software.

cg-pro-4

BCM physical wiring

cg-pro-5

Land Rover RFA 2m53J 9S12XET256 wiring diagram in the CG Pro 9S12 software.

cg-pro-6

Land Rover RFA smart ECU physical wiring:

You need not connect the CLK line first, if you are prompted to decrypt when reading, then connect the CLK line according to the software wiring diagram.

cg-pro-7

Choose BCM or RFA module, read and save the data.

cg-pro-8

cg-pro-9

Note: Do not unplug the wiring immediately after the data is read out successfully, later you will write key and then rewrite data.

Part 2: Load the data into CG Pro software to program key

Click on “Key” – ” Jaguar / Land Rover” – Model [KVM – XEP100 (BCM) for example], then click on “Key Function” to enter the key programming menu incl. load KVM DFLASH, load KVM EEPROM, Load BCM DFLASH, Read key, Write key etc.

cg-pro-10

Menu options:

Step 1: Load KVM DFLASH

Step 2: Load KVM EEPROM

This function is for emergency start (optional option). If you need to operate this option, please read out BCM immo data and meanwhile tick on this option when key is programming, then load BCM data.

Step 3: Place a blank key into the CG Pro key programmer, click on “Read key” button.

***Can read key ID and check if the key is placed correctly.

Step 4: Select key position and then click on “Write key” button.

cg-pro-11 cg-pro-12
Please save the data in the order of DFLASH,EEPROM,BCM.

Part 3: Rewrite the data generated after key programming.
1.Back to the main menu where you read out the data just now.
2.Open the corresponding data saved after the key is wrote.
3.Write data after connecting the computer.

Done!

Now, you can unplug the cables from the computer and CG Pro, then reinstall the KVM module back to the car.And for more CGDI Key Programmer,you can check here:CGDI Programmer

CGDI MB write the original key through the NEC adapter

How to use CGDI MB to write the original key through the NEC adapter?

Here we go for procedure.

Please insert the key into CG-MB device

CGDI-MB-1

Click ”Read key/chip’” and get related key information.

CGDI-MB-2

Disassemble the key, take the chip out, and solder it to the NEC adapter.

CGDI-MB-3

Click on “Read key /chip” and view related information.

CGDI-MB-4

Reset and erase new key

CGDI-MB-5

Click open/write, please do by following the on-screen instructions.

CGDI-MB-6

Choose一unused key position data,click and open it.

CGDI-MB-7

Write success fully.

CGDI-MB-8

Take the chip out, weld NEC adapter back the key, get on the car.

CGDI-MB-9

Lonsdor JLR Key Programmer vehicle list

Lonsdor-JLR-Key-Programmer-1

JLR-IMMO is a dedicated IMMO device for Jaguar and LandRover, launched by Shenzhen Lonsdor technology company. It’s designed to program car keys and applicable to above 95% of Jaguar and LandRover models currently (VPW protocols of Jaguar’s old model is unsupported). Auto Key Programmer JLR-IMMO supports OBD program mode, and more than 50 software versions for KVM as well. A majority of KVM case is dismantle-free and can be programmed with this device.

Lonsdor JLR Key Programmer Supported vehicle list:

https://www.obd2tool.com/goods-10050-Lonsdor-JLR-Key-Programmer-for-Land-Rover-Jaguar.html

(1) LandRover 2008-: Immobilizer and smart key
(2) LandRover Discovery3: Immobilizer
(3) LandRover Freelander: Immobilizer and smart key
(4) LandRover Freelander2: Immobilizer and smart key
(5)LandRover Discovery4: smart key
(6) LandRover Evoque: smart key
(7) LandRover Defender: remote
(8) LandRover new models KVM case’s software version: FK72
(9) LandRover new models KVM case’s software version: HPLA
(10) Jaguar XF: smart key
(11) Jaguar SJ: smart key
(12) Jaguar F-TYPE: smart key
(13) Jaguar X-TYPE: Immobilizer
(14) Jaguar Sovereign: Immobilizer
(15) Jaguar XJ6: Immobilizer
(16) Jaguar XJ8: Immobilizer
(17) Jaguar XJR: Immobilizer
(18) Jaguar XK: remote
(19) Jaguar XKR: remote
(20) Jaguar new models KVM case’s software version: FK72
(21) Jaguar new models KVM case’s software version: HPLA
Lonsdor-JLR-Key-Programmer-2

www.obd2tool.com

AURO OtoSys IM100 Volvo 2010-2016 Key Learning Confirmed!

AURO OtoSys IM100 is verified to work with VOLVO immobilizer from the year 2010 to 2016.

It’s second to Lonsdor K518ISE universal key programming tool that support VOLVO.

Step 1: learn keys

AURO Otosys im100 tested with Volvo immo…

14-1 14-2 14-3 14-4
14-5 14-6

Otosys IM100 Volvo car list:

Volvo S60, S80, V40, V60, V70, XC60, XC70

semi-smart keys 2010-2016

Keyless CAN system

Auro IM100 Auto Key Programmer begins to program new semi-smartkeys to Volvo when all keys are lost
14-7
14-8

If you want to continue to performing this function, there must be one key!

The original key, if cleared successfully, needs to be learned again

Please verify the type of the key first

Ignition off

Learned keys: 2

14-9

Step 2: decrypt the immo & clear all keys

The immobilizer unit is to be decrypted, which may last a few hours.

Please make sure that the ignition is turned off

You can exit this process at any time and continue from the interruption point in the next operation

Decrypting the immobilizer unit…

14-10

The procedure will take 0-8 hours due to the difference between vehicles.

You’d better manually close the center-control LCD, lamp, etc. Toreduce the power consumption

It doesn’t matter whether the door is opened or closed

You can exit this process at any time and continue from the interruption point in the next operation

14-11

Decrytion success

14-12

Otosys im100 is reading security data

Don’t disconnect the OBD connection

14-13

Copy CEM security data successfully

14-14

All key cleared! Learned keys: 0

14-15 14-16

Step 3: learn keys

Key learning success

14-17

Ignition off

Remove the key from the key slot

14-18

Learned keys: 4

14-19

Job’s done!

Credits to all off obd2tool.com working  for the IM100 test

Lonsdor K518ISE Read Kia Ceed 2011 Pin Code and Program Key

Here’s the guide to duplicate a key for the Kia Ceed 2011 with chip PCF7936, pin code calculation and key programming is performed by Lonsdor K518ISE Key Programmer.

Step 1: Calculate Pin Code

Connect K518 host wit vehicle via OBD socket

Select Immobilizer->Kia->Read Pin Code->46 Chip

5-1

5-2 5-3

Turn ignition to ON position

Read pin code in progress

Read Pin code success. The Pin is exactly the same as read by Xhorse VVDI Key Tool.

5-4

5-5

Step 2: Program chip key

Back to Kia menu

Choose Select from type->Immobilizer->Type 1(CAN)

5-6

5-7
Read key number

5-8

5-9

There are 2 keys existed

Select Program key function

Turn on ignition switch

Lonsdor K518 will require to enter Pin code to access

5-10

Programming key…

Program key success. Press Yes to program next key

5-11

Remove 1st key

Place next key and turn on ignition

Follow same procedure to program next key until program complete

5-12

The new key can start car.

Step 3: Program remote control

Select Kia->Select from type->Remote System->16 PIN->Type 4->Program remote

5-13

5-14

5-15

Note: If you are not sure about the system type, try one-by-one until success.

Don’t insert key into ignition

5-16

Program remote control: program LOCK or UNLOCK button for more than 1 s

Remote programming success.

Disconnect Key Programmer Lonsdor K518ISE.

Done.

 

www.obd2tool.com

Lonsdor K518ise new update Toyota Hyundai Honda & Nissan

Lonsdor K518ISE new update (2018/08/08)

8A Smart key
2007 crown key
Alphard Add smart key
2006 Reiz
Crown 68 chip all lost

Hyundai Series
2013/2015 Verna Remote
2009 Rohens Add smart key
2014 Sonata 8 Communication
2014 1X25 Smart key all lost

Honda & Nissan
Honda Accord 9th key
2017 NISSAN Toana 4A Transponder

17-1

17-2

CG-Pro 9S12 Freescale Programmer V1.6.0.0 updated

CG Pro 9S12 Freescale Programmer V1.6.0.0 updated (2018.08.04):

CG Pro 9S12 Key Programmer Highlights:

Read and write any BMW CAS 1-4, Porsche BCM, Mercedes-Benz EIS, Audi BCM2 Etc anti-
theft computer (100% stable security, subject to domestic test users alike)

1.Add Immobilizer
Land Rover Discovery 3
2.Add Dashboard
Honda Fit High
Honda Fit Low
Honda Vezel
Honda XR-V
Honda Greiz
Hyundai 2016 Carens
Hyundai Sonata 9
Hyundai Sonata 9 V2
KIA 2016 K3
KIA 2016 K5
Suzuki 2017 Jimny
BMW F Series (3 Series)
ChangAn ZhiXin II
3.Add Gateway, Support for CGMB Gateway data writes
Benz 204/212-1L15Y (FLASH)
Benz 204/212-3M25J (FLASH)
4.Add chip
Motorola-9S08 9S08LG16-0M48V
Motorola-9S08 9S08LG16-0M48V
Fujitsu MB91F061S
Fujitsu MB91F062BS
Fujitsu MB91F467S
Microchip PIC18F24J11
Microchip PIC18F25J11
Microchip PIC18F26J11
Microchip PIC18F44J11
Microchip PIC18F45J11
Microchip PIC18F46J11
Microchip PIC18F26J13
Microchip PIC18F27J13
Microchip PIC18F46J13
Microchip PIC18F47J13
Microchip PIC18F24J50
Microchip PIC18F25J50
Microchip PIC18F26J50
Microchip PIC18F44J50
Microchip PIC18F45J50
Microchip PIC18F46J50
Microchip PIC18F26J53
Microchip PIC18F27J53
Microchip PIC18F46J53
Microchip PIC18F47J53
Microchip PIC18F6620
5.Fixed the problem that CAS2-2K79X read failure
6.Optimizing code to improve the stability of program operation.