How to do self test on VCI , Keypad, CANdi and RS232 with GM Tech2 Scanner?

How to do GM Tech 2 scanner self test step-by-step?

1.VCI self test

2.Keypad self test

3.CANdi self test

4.RS-232 self test

 

Follow the instruction in detail…

 

Part 1: Tech2 VCI self test

Insert the GM card

1

Connect the adapter and ready for the self test

2

Go to the main menu and select F4: Tool options

3

F3: Self test

4

Exit to continue

5

Select the function for self test

6

Here, press F2: Automated VCI

7

The VCI module self test result

 

Passed VCI selftest.

8

 

 

Part 2: GM Tech II Keypad self test

Go to the Tech 2 menu and select F4: Tool options

9

Then F3: Self test

10

Before running the Tech 2 self test:

(1) Candi cannot be connected

(2) Aldl loopback should be connected (GM3000109)

(3) Failure to follow these instructions may invalidate the self test

11

F3: Selectable main pcb

12

Press Keypad

13

And press key

14

Note: In the last image, the actual key pressed is F0 and the final result is PASS – that’s normal

 

When you test the keypad, press F0-F1-F2-F3-F4-F5-F6-F7-F8-F9-EXIT-ENTER-in a good order! DO NOT SKIP ANY ONE.

15

 

 

Part 3: Tech 2 scan tool CANDI module self test

VERY IMPORTANT: Pls make sure of the connection of the OBD adapter, OBD main cable, CANdi module, Tech 2 scan tool and the power supply — ALL should be good

 

The power should be connected by the OBD port for CANdi self test.

16

17

18

19

F4: Tool options

20

F7: CANdi diagnostics

21

F0: POST result

22

Test status

23

F1: Self test

24

CANdi self test result

25

Pass selftest

There are two test results for CANdi module.

The one is Figure 8, and the other is Figure 10.

 

Part 4: GM Tech2 scanner RS232 self test

Check the connection before R232 self test

26

F4: Tool options

27

F3: Self test

28

 

Exit to continue

29

F3: Selectable main PCB

30

F2: Rs-232 loopback

31

Rs232 test: Passed!

32

Be the first to comment

Leave a Reply

Your email address will not be published.


*