OBDSTAR X300 DP Plus program 2018 Fiat Doblo Key with FCA 12+8 Adapter

OBDSTAR X300 PAD2 works with OBDSTAR FCA 12+8 Adapter can be used for all 2018 FCA (Fiat, maserati, Chrysler, Alfa Romeo) vehicles. This article is available with the guide to program 2018 Fiat Doblo by the OBDSTAR devices.

Preparation:

Car: 2018 FIAT Doblo
Device: OBDSTAR X300 DP plus C package+ FCA 12+ 8 adapter

Procedure:

Open OBDSTAR main menu

Select “IMMOBILISER”-> “FIAT”-> “FIAT V32.14”

obdstar-x300-dp-plus-2018-fiat-doblo-1

Initializing diagnostic data…

Press “Pre-Coding”-> “DELPHI 93C86/ NEC (ID46)”-> “INTELLIGENT MODE”

obdstar-x300-dp-plus-2018-fiat-doblo-2

obdstar-x300-dp-plus-2018-fiat-doblo-3

obdstar-x300-dp-plus-2018-fiat-doblo-4

Note: This function is available by connecting the server, please ensure the internet connection is normal.

Click “Read PinCode”

obdstar-x300-dp-plus-2018-fiat-doblo-5

Follow the prompt on the screen to switch ignition on

Read out PinCode: 63433

obdstar-x300-dp-plus-2018-fiat-doblo-6

Return to “INTELLIGENT MODE” and select “Program keys”

obdstar-x300-dp-plus-2018-fiat-doblo-7

Pay attention to the prompt “All keys that could start the cars are going to be programmed, keys that not programmed could not be used anymore (could not go back to program). The new key to be programmed must be a custom key or a predetermined key.”

obdstar-x300-dp-plus-2018-fiat-doblo-8

Turn on ignition

Enter 5-digit PinCode

obdstar-x300-dp-plus-2018-fiat-doblo-9
Turn off ignition

Insert a new key and switch ignition on

Program key is completed

obdstar-x300-dp-plus-2018-fiat-doblo-10

Test the original key and new key successfully

obdstar-x300-dp-plus-2018-fiat-doblo-11

Why need to use OBDSTAR FCA 12+8 Universal Adapter?

All 2018 FCA (Fiat, Chrysler, Alfa Romeo) vehicles are equipped with SGW Safety Gateway modules to prevent anyone access to the vehicle through the OBD2 port using a clone diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.

How to use OBDSTAR FCA 12+8 Universal Adapter?

Step 1: Locate and unplug the 12 PIN& 8 PIN connectors of the SGW module

Step 2: Connect the FCA 12+8 directly to the 12PIN and 8 PIN connector on the car (two connectors connected to the SGW)

Step 3: Achieve normal communication with the car

This is 2018 – Dodge RAM 1500 / 2500 /3500

obdstar-x300-dp-plus-2018-fiat-doblo-12

This is 2018 – Dodge Durango

2018 Jeep Grand Cherokee

obdstar-x300-dp-plus-2018-fiat-doblo-13

This is 2018 Maserati Ghibli SGW location:

obdstar-x300-dp-plus-2018-fiat-doblo-14

Note: Remove the steering wheel guard, at the bottom of steering column

Which car need OBDSTAR FCA 12+8 Universal Adapter?

Fiat: 2018-

Maserati: 2018- Maserati and Ghibli

Chrysler:

2018- Chrysler 300

2018- Chrysler Pacifica

Dodge

2018 – Dodge Challenger

2018 – Dodge Charger

2018 – Dodge Durango

2018 – Dodge Journey

2018- RAM

Jeep:

2018 – Jeep Cherokee

2018 – Jeep Grand Cherokee

2018 – Jeep Compass

2018 – Jeep Wrangler

2018 – Jeep Renegade

Latest X300 DP Plus Update:

(Need FCA 12+8 connector)

– OBDSTAR DP PLUS Maserati [V32.22] IMMO upgrade:

Ghibli 2018- Pincode reading and smart key programming

– Dodge [V30.44] Upgrade:

Increased Charger 2019 cluster calibration

– Jeep [V30.44] Upgrade:

Increased Cherokee 2019 Cluster Calibration

– Maserati [V30.03] upgrade:

Increased Ghibli-95320 Cluster calibration

Enjoy!

Be the first to comment

Leave a Reply

Your email address will not be published.


*