How to Configure MB SD Connect C4 when diagnose Benz DoIP Models

September 1, 2020 Eva MB STAR 0

To diagnose Mercedes Benz DoIP models with the new MB Star SD Connect C4 DoIP diagnostic scanner, you need to configure it first.  Follow steps below to configure SD Connect C4 DoIP multiplexer:

1. Go to local network connection

configure-mb-sd-c4-doip-1 (2)

2. Press Properties

configure-mb-sd-c4-doip-2 (2)

3. Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue

configure-mb-sd-c4-doip-3 (2)

4. Enter IP address

IP address: 172.29.127.24

Subnet mask: 255.255.0.0

configure-mb-sd-c4-doip-4 (2)

5. Click on Advanced

configure-mb-sd-c4-doip-5 (2)

6. Click on Add to configure DoIP IP address

configure-mb-sd-c4-doip-6 (2)

7. Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45)

8. Click on OK to finish configuration.

Related posts:

  1. SD C4 Plus 11 copy best Benz DOIP diagnosis solution
  2. VXDIAG MB SD Connect C6 MB Star C6 Benz Diagnostic Tool with DOIP&AUDIO Function Better than MB STAR C4C5
  3. MB SD Connect Compact 4 Mercedes Benz Diagnostic Tool FAQS
  4. How to connect and configure BMW ICOM NANO

Be the first to comment

Leave a Reply

Your email address will not be published.


*