Xtool X100 Pad2 Program Dodge Dart 2013 Fobik Key

August 17, 2018 Eva XTOOL Scanner 0

Success! Program fobik to Dodge Dart 2013 up using Xtool X100 Pad2 pro key programmer.
43-2

Connect X-100 PAD2 with vehicle

Turn ignition switch to ON position

Select Immobilizer function->Chrysler/Jeep/Dodge-> Proximity/Fobik (RFH) ->Dodge->Dart 2013- >Program keys

43-1
43-3

43-4

Turn on hazard light and turn ignition off

Select Fobik

Select Program Keys

43-5

Place a new Fobik into ignition. Ignition switch must be in the “LOCK” or “OFF” position

43-6

Xtool X100 pad2 requires to enter 4-digit pin code to access

43-7

Programming fobik in progress

Programming success

43-8

Test the new fobik

43-9

43-10

Done.

Related posts:

  1. Xtool X100 PAD2 OBD Program Toyota All Smart Keys Lost via KS-01 Emulator
  2. Xtool X100 Pad2 key program & pin code read feedback
  3. Buy xtool x100 pad2 or obdstar tool
  4. How to Deal with XTOOL X100 Pad2 Fail to Load Data

Be the first to comment

Leave a Reply

Your email address will not be published.


*