Purpose: transponder key copy
Car model: VW Jetta
Car year: 2008
Transponder: Megamos ID48
Device: Autel MaxiIM IM508
Steps:
go to autel im508 immo system
accept the disclaimer
go to im508 volkswagen software
smart mode
reading vehicle information
read out the vehicle
it’s jetta 2008
information:
megamos 48 key; #key blank
“key learning” function will first start clear all working keys, then learn keys available.
“remote control learning” function will first clear all working remotes, then learn remotes available. before using these functions, pls ensure that all keys are prepared.
“key add” function will add one key to existing key count.
“remote control add” function will add one remote to existing remote count. the customer can use there functions without all keys available.
copy megamos 48 key:
step 1: read immo data
step 2: read and write key id
step 3: make a dealer key
key copying success!
test the key on the car
the key is working!
job’s done!
Time: under 5 min
Result: success!
Conclusion:
Walk thru of the great feature built into the Autel IM508 and IM608 for cloning VW megamos id48 transponder keys.
Using the car key programming you can clone a key ID to a new blank key saving time from pulling and decoding the PIN.
Everything can be done in under 5 Minutes. Volkswagen Audi Group.
Leave a Reply