How to Install VAS 5054A ODIS Engineering ODIS-E 6.7.5 and PostSetup

VAG diagnostic software ODIS engineering version ODIS-E 6.7.5 has been tested working perfectly. Here are the free download and installation instructions by engineer.

Version: ODIS-E 6.7.5; Postsetup 67.5.10

Language:Dutch,English,Czech, Spanish, French, Chinese

Compatible device: VAS 5054A Bluetooth interface, VAS 5054A Plus

Operating system: Windows 7 32bit/64bit; Windows 8.1


Free Download:
ODIS Engineering 6.7.5  full keygen+Launcher + Postsetup (no password):!TFUmCZpI!dbX3DKeLW8CRtPGXBtE0UbuIySNnTEULIkywyXPWqyw

ODIS Engineering 6.7.5 Patch:

Download ODIS Engineering – ODIS-E 6.7.5 – PostSetup ISO (personal tested)!P4xlWKJa!f2YmG2AU1Zy4dyWYhmBIXLX4qbLq3hM-BgaLBC_A114

no password or anything, just doing my part to help.

How to install VAS5054A ODIS-E 6.7.5?

Main steps:

Step 1: Install setup assistant

Step 2: Register ODIS-E 6.7.5

Step 3: Download Postsetup

Step 4: Test ODIS Engineering 6.7.5

Step 5: Repair Bluetooth

Step 1: Install Setup Assistant

Change date and time

Change date to January 1st, 2017 (UTC-8:00) Pacific Time (US & Canada)

Open ODIS-E 6.75 software CD

Copy 6.7.5 kg-pass 123 zip file to desktop

Extract zip file on desktop with encrypted password: 123

Delete zip file on desktop

Copy 6.75 工程师(engineering) folder to desktop and open it

Open OffboardDiagSetup-Engineering_6_7_5

Select setup language
Install ODIS-E setup assistant
Click on Next
select Target folder
click Next
select a directory C:/ODIS-DIAG-MODULES-ENGIN
click on Next

select diagnostic interface: VAS 5054

A bluetooth pairing must be established to use the vas5054, click on Next
License file selection

search desktop->工程 6.7.5 folder->license.dat
click next
Tick create a folder in the start menu
click Next
installing Offboard Diagnostic Information System Engineering

install Microsoft Visual C++2005

Accept the windows security warning by clicking on Install

Finish install Setup assistant
Restart the computer

Step 2: Register ODIS-E 6.7.5

Delete VW-MCD-PDX-Builder file on desktop

Start-> All Program-> Offboard Diagnostic Information System Engineering folder ->Send Offboard Diagnostic Information System Engineering software to desktop

Start-> All Program->Softing D-PDU API for VCIs V1.20.037 folder->send EDIC Configuration Manager to desktop

Right click Offboard Diagnostic Information System on desktop open Properties->Open file location

Open 工程 6.7.5 folder on desktop

Copy and replace OffboardDiagLauncher on Offboard Diagnostic Information System desktop folder

Open Offboard Diagnostic Information System software on desktop

Software will require to enter registration key
Open 工程 6.7.5 folder on desktop
Open key generator

enter registration name: abc
Copy Hardware ID to key generator and click on Generate

it will generate registration key

paste the key to software Key area
click Register

Step 3: Download Postsetup

open ODIS-E postsetup
select local directory

C:/Users/AADD/Desktop/6.75 Engineering-> Database->ODIS_Engineering

if software prompt “no valid software configuration could be found”, select the  destination

C:/Users/AADD/Desktop/6.75 Engineering-> Database
click next
select Postsetup language

check postsetup version:67.5.10
Press next icon to download postsetup

download completed will launch software automatically

Step 4: Test Software

Select Admin->Diagnostic data

open C:/Users/AADD/Desktop/6.75 Engineering-> diagnostic data->AU (Audi)->ODXUPDATE

Select LB (Lamborghini, Bentley),SE (Seat),SK (Skoda),VW ODXUPDATE on by one

Connect VAS 5054a with computer by USB

Open Computer->Manager->Device Manager->Softing Vehicle Interface->VAS5054

Open EDIC Configuration Manager

Current connection is USB connection
Open Offboard Diagnostic Information System Engineering software on desktop
click on Diagnosis

Coding function

special functions, i.e ECU programming, application programming etc

Step 5:  Pair Bluetooth

Installing device driver software

device is ready

select Bluetooth icon,add a device VAS5054

ener the device pairing code: 082145725
click on Next
this driver has been successfully added to this computer
Open EDIC Configuration Manager-> Add a new device

select COM Port 4

Bluetooth connection and com port setup success.

Run ODIS-E 6.7.5 software and diagnose vehicle.

Why Renault CAN Clip Diagnostic Interface can’t work

I bought a Renault CAN Clip Diagnostic Interface for my Laguna Grandtur 2003 last Friday from China. I connected two CAN chip with in the same computer. One of the CAN chip can work successfully with 4 LED light on, however the other one did not work and LED light was out(as the following picture shows.)
High Quality Renault CAN Clip Diagnostic Interface With IBM X200T Laptop Full Set Ready To Use
I doubted that if there was something wrong with the second CAN chip? I consulted the technical service for solution.

They informed me that I am not allowed to connect two CAN chips with a computer at the same time because the computer cannot identify them together. But the problem is I did not connect them at the same time. I first installed a CAN chip from and found it worked perfectly. Then I installed another one but it just did not work. They told me the computer can not be compatible with two Renault CAN Clip in the meantime. I was recommended to change another computer for the second chip.

What’s new in VCS 5054A ODIS V2.27:
1 estimated remaining time is displayed for ECU flash operation.
2 Diagnostic protocols contain the disruption of GFF session, extended measurement value, improve,communication ECU watch,
3 Using the hardware diagnostics, hardware diagnostic connection, OS, hotfixes use and submissions of requests for assistance
4 measured value display has been improved.
5 document in GFF is displayed in a separate window.
6 a message box will be displayed at the beginning of the test drive mode.
7 GFF hotfix can be integrated in the diagnostic session.
8 Dangerous message has been modified.
9 stop the diagnostic session may be interrupted.
10 automatic deletion of automatic saving diagnostic protocol after successful transmission.
11 passthru selecting hardware diagnostics has improved.
12 VAS 5054A ODIS software update service was unstable.

VAS 5054a ODIS 3.0.1 / 2.2.4 require to update (fixed)

Some VAS 5054A OKI Chip users complaint that their VAS 5054A ODIS update interface always pops up, and here is the useful solution to turn off the update sreen, which works for ODIS 3.01 or ODIS 2.2.4.

Update – Invoeren van configuratiegegevens…

Met de update kunt u de onderdelen van het Programma bijwerken (Update – Entering configuration data…
The update allows the components of the program Update)


Understandable solutions here offered by experienced users:
make folder like this: “c:\PostSetup\Odis\Trade-Retail\Software\Update\”
now put the file “site.xml” from PostSetup in the update folder
now in ODIS, go to Admin – Verbindungen – Mirror Server 2 – Mirror Server URL you must write “file:/C:/PostSetup”
When ODIS now check for Update no avaible
With every Update like the 6.50.20, you must copy the new site.xml to update folder.
Works 100% with ODIS 2.24 and also works very good with odis 3.0.1 and 3.0.2.

CAN Clip Renault Functions
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Can tool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
8. Antipollution
9. Multimeter

Renault CAN Clip V164 Software
customer who bought this renault can clip on our website before,please hurry to update it asap,the newer version can support more and newer renault cars

The Installation Instructions Of The VAS 5054A ODIS V2.0

I bought VAS 5054A Bluetooth with OK chip from China,I tried tried to install ODIS 2.0 software on many operating systems, including Win 7 32 bit Windows xp 32 bit 43bit win 7 64 bit.Following I share my using experience with you.
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
Insert the VAS 5054A-base CD and click the “steupstart” icon, there will show some windows one by one, you just need to click “INSTALL”->”ACCEPT”->”START”, the progressing bar will show the process of the software installation. When there pop out the window of “End of successful VAS-PC Installation, press “FINISH” and then choose “EXIT”.

Next, you need to install the Java, click the “JavaSetup6″ icon and install it. Then click the “VAG VAS-PC HotFix” icon and finish the installation.

Then, download the adobe reader 7.0 and install it. After that, restart your computer to save the installation settings. When the computer restart, connect the 5054A from to the computer and install the driver. Then turn on the computer desktop, VAS-PC, choose “OK”

Now you can start to set the options and click “Administration” first, choose the “Enter workshop code” in the list of “Select function”. The first group code is the 3 digital, the second group code is the 5 digit and the third group code is 2 lines no more than 60 characters. After you finish the setting, go back to the management interface and select “Vehicle Self-Diagnosis”, then the “On Board Diagnostic(OBD)”, write the vehicle identification Number down, click “OK”. After all these steps, you can see all the systems of the vehicles, you can choose what you want to check the control unit.

vas 5054a oki chip Computer Windows System Requirements:
Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 10GB space for installing VAS 5054A

How to use vas5054a ODIS V2.02 OBDii tool to reset VW service remainder

obd2tool here takes an example of resetting VW service internal reminder light.

Tool needs:

VAS 5054A ODIS V2.0/V2.02 USB + Bluetooth VAG OBDII diagnostic tool

NOTE: ODIS V2.0 support multi-language, but ODIS V2.02 supports English ONLY



Install VAS 5054A ODIS V2.0 diagnostic software


Connect vas 5054a OBDII tool directly or via Bluetooth wireless connection (password: 082145725)

Click “Start diagnosis” link on the main ODIS program to access Guided Function

Select “SCH-17” control module and click “Identify control unit” to activate the control module

Select “Guided Functions” on the list

Select “Service Internal display, resetting” on the prompt box, click “Execute” button.

Follow the system prompts until view the Reset service data, click “Done/Continue” button.

The service internal warning indicator has been successfully disabled.

Exit the ODIS V2.0 diagnostic software program.