SKP900 Program Remote Key for Smart Fortwo 451

Here is the instruction on programming 3 button remote key for Mercedes Smart Fortwo 451 up to 2013 by using original SuperOBD SKP-900 Key Programmer.

Instruction:
Note: Do follow every IGN ON & OFF operation.

Connect SKP900 with vehicle via OBD diagnostic socket

Select IMMOBILIZER
skp900-smart-451-key-progrmaming-1
Select Vehicle Brand: SMART
skp900-smart-451-key-progrmaming-2
Select model: BR451
skp900-smart-451-key-progrmaming-3
Loading
INFO: Remote will adapt when key programming finish
skp900-smart-451-key-progrmaming-4
Select Immobilizer system
skp900-smart-451-key-progrmaming-5
Choose OBDII adapter, Turn ignition ON
skp900-smart-451-key-progrmaming-6
SKP-900 will display VIN/FIN code
skp900-smart-451-key-progrmaming-7
Select PROGRAM KEY
skp900-smart-451-key-progrmaming-8
Adapt 6 keys most
skp900-smart-451-key-progrmaming-9
Turn ignition ON
Programming…
Turn ignition OFF
Turn ignition ON
Programming…
Program Finish. Press YES to program next key (or NO to go back).
skp900-smart-451-key-progrmaming-10
Turn ignition OFF

Insert new key. Turn ignition ON
Programming…
skp900-smart-451-key-progrmaming-11
Turn ignition OFF
Turn ignition ON
Program Finish.
skp900-smart-451-key-progrmaming-12
Test the new programmed remote key.
skp900-smart-451-key-progrmaming-13

PS:

SKP900 key programmer support following Smart cars list.
skp900-smart-451-key-progrmaming-14

SKP900 Update software

1  Connect your SKP900 Key Programmer to PC via USB Cable, and do not make any operation as follows:

15-1

2  Select “FUNCTION UPDATA” in main Menu and press [YES]:

15-2

3  Run “Auto Key Programming SuperOBD SKP-900 Update Tool.exe”

15-3

4  Press button “OPEN” to load update file->

15-4
15-5

5  Select COM port(TWO WAYS TO SELECT COM PORT)->

5.1 Press button “AUTO”(way 1)

15-6

5.2 Manually choose(way 2)

15-7

How to get Port Number:
“My Computer”->Click the right mouse button->Manage->:

15-8

Device Manager->

15-9

Ports(COM&LPT)->

15-10

Find USB Serial Port->

15-11

COM port is COM3

How SKP-900 key programmer add Ford Focus remote key in 3 steps

This blog will manage customers to add Ford focus remote keys with SuperOBD SKP900 Hand-held Auto Key Programmer, just need 3 steps, spend you several minutes.

Vehicle: Ford Focus

Tool Used: SKP-900 auto key programmer

Detail steps:

Step1

Connect key programmer SKP-900 to the car. Enter “IMMOBILIZER” option and choose car model “FORD”→ “FOCUS”

Then choose “IMMOBILIZER2” and press YES to continue..

10-1

Follow the prompt turn ignition on and press YES to next step

10-2

Step2

Choose DELETE KEY to delete all registered keys.

10-3

Press YES to continue, after this step, all registered keys will be deleted, then you can program the new keys next.

10-4

10-5 10-6

Step3

Back to previous and choose “ADD KEY”

10-7

Inset a new key turn ignition on and press [YES] to continue

10-8

If you want to add one more key, follow step3

10-9

Succeed in programming Ford Focus remote key by using OBD II Scanner SKP-900 auto key programmer!

10-10

Finally, Exit the program and turn off the tool.

How to update SuperOBD SKP900 Key Programmer?

Do you need a clear tutorial for SKP-900 Update? This blog will guide you How to update SuperOBD SKP-900 Key Programmer step by step! Check below!

Step1. Download newest software from SuperOBD official website  www.obd2tool.com.

Step2. Connect SKP-900 key programmer to computer using the USB cable.

Register SKP-900 official website in member centre. Download the update software and unzip it to get the “update bin file”.

5-1

5-2

Step3. Extract SKP900 Update Tool V2.4 zip file and SKP900 USB Driver zip file. Now install SKP900 driver: go to “My Computer” → “Properties” → “Hardware” → “Device Manager”

5-3

The USB serial will not be found now. Click the “Scan” button to scan the hardware.

5-4

Step4. You will see a Found New Hardware Wizard for “USB-Serial”, click “Next”.

5-5

Check the checkbox “Include this location in the search” then click “Browse”. Choose “USB driver” folder then click “OK”.

5-6

Click “Next” then “Finish”.

Step5. There comes another Found New Hardware Wizard for “USB Serial Port”, choose the option “Install from a list or a special location”, click “Next”.

5-7

Click “Browse”, choose “USB driver” folder then click “OK”. Click “Next” then “Finish”.

Now SKP900 USB driver install completely.

5-8

Step6. Open Car Key Programmer SKP900 Update Tool V2.4 folder then open SKP900 Update Tool V2.4.

5-10

Open the update bin file then click “Update” to start SKP900 update. (Remember not to disconnect SKP-900 form computer while updating.)

5-11 5-12

The whole process will cost about 37 minutes, just be patient to wait it complete. And after that all OK, you can start to use newest SKP900 software !