SKP900 key programmer what works and does not work

To help more people know SKP900 Key Programmer, I read a great number of feedbacks, and put the tested car models and years together including what SKP900 key programmer works and doesn’t work.

For USA cars:
(24th October, 2015 update) SKP900 key programmer can do all keys lost with every car mentioned as follows:
2013 CHRYSLER 200 – WORKS FINE
2008 DODGE CHARGER – WORKS FINE
2013 FORD EDGE – WORKS FINE
2011-2013 FORD F-150 – WORKS FINE
2013 MUSTANG – WORKS FINE

2012 JEEP COMPASS – WORKS FINE
2008 JEEP WRANGLER – WORKS FINE
2014 KIA RIO – WORKS FINE
2013 KIA SOUL – WORKS FINE
2013 KIA FORTE – WORKS FINE

2009 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2012-2013 TOYOTA CAMRY – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS
2013 TOYOTA HIGHLANDER – WORKS FINE, REMOTE + TRANSPONDER SEPERATE PROCEDURE BOTH WORKS

2002 VOLKSWAGEN GTI – WORKS FINE

2005 – NISSAN 350Z – WAS ABLE TO PULL BCM BUT COULD NOT PROGRAM KEY. I THINK JUST NEED TO PLAY WITH IT LONGER
2013 FORD FOCUS – DOES NOT WORK
2014 FORD FIESTA – DOES NOT WORK

Kia in USA is transponder optional and most do not have it still. SKP900 is to program the remote.
This car used a flip key.

2013 Mustang – WORKS FINE. 10 minute security wait. Everything works perfect. There is option for Mustang 2011-2013 on my device.

For UK models and other area models:

Successful:
2015 HONDA ACCORD LOST ALL KEY WORKS AAAAA..
2x Honda civic 2008 (can)
2015 CIVIC SMART KEY ALL LOST WORKS AAAAA
2014 CRV SMART KEY ALL LOST WORKS AAAA..
2015 ODYSSEY SMART KEY ALL LOST WORKS
2012 ALTIMA SMART KEY ALL LOST WORKS
2004 CARAVAN LOST KEY WORKS
Land rover discovery 3 works 100%, Freelander 2 doesn’t work.
2x Landrover Discovery 3 add key
Program smart key for ford explorer with all key lost.need two smart key after reseting. works 100%.
2008 focus petrol uk model – WORKS FINE.
Can read pin code and program the key for vw transporter year 2000 and vw transporter 2007.
Mazda 3 2007 lost keys
Jaguar X-type 2005 lost keys
Jaguar XJ 2006 lost key
peugeot 407 2006 add key
2013 Mazda 3
toyota smart key

Failed:
Pear keys in uk – DOES NOT WORK
Toyota Avensis around 2008 with 3 button triangular remote – DOES NOT WORK
New focus smart key – Failed on programming
2014 TOYOTA SMART KEY DID’N WORK
kuga 2010 not work – communication failed
Toyota highlander 2014 LOST ALL SMART KEY DID’N WORK

SK900 often update, more models will be tested ok.

SKP900 Program Remote Key for Smart Fortwo 451

Here is the instruction on programming 3 button remote key for Mercedes Smart Fortwo 451 up to 2013 by using original SuperOBD SKP-900 Key Programmer.

Instruction:
Note: Do follow every IGN ON & OFF operation.

Connect SKP900 with vehicle via OBD diagnostic socket

Select IMMOBILIZER
skp900-smart-451-key-progrmaming-1
Select Vehicle Brand: SMART
skp900-smart-451-key-progrmaming-2
Select model: BR451
skp900-smart-451-key-progrmaming-3
Loading
INFO: Remote will adapt when key programming finish
skp900-smart-451-key-progrmaming-4
Select Immobilizer system
skp900-smart-451-key-progrmaming-5
Choose OBDII adapter, Turn ignition ON
skp900-smart-451-key-progrmaming-6
SKP-900 will display VIN/FIN code
skp900-smart-451-key-progrmaming-7
Select PROGRAM KEY
skp900-smart-451-key-progrmaming-8
Adapt 6 keys most
skp900-smart-451-key-progrmaming-9
Turn ignition ON
Programming…
Turn ignition OFF
Turn ignition ON
Programming…
Program Finish. Press YES to program next key (or NO to go back).
skp900-smart-451-key-progrmaming-10
Turn ignition OFF

Insert new key. Turn ignition ON
Programming…
skp900-smart-451-key-progrmaming-11
Turn ignition OFF
Turn ignition ON
Program Finish.
skp900-smart-451-key-progrmaming-12
Test the new programmed remote key.
skp900-smart-451-key-progrmaming-13

PS:

SKP900 key programmer support following Smart cars list.
skp900-smart-451-key-progrmaming-14

SKP900 Update software

1  Connect your SKP900 Key Programmer to PC via USB Cable, and do not make any operation as follows:

15-1

2  Select “FUNCTION UPDATA” in main Menu and press [YES]:

15-2

3  Run “Auto Key Programming SuperOBD SKP-900 Update Tool.exe”

15-3

4  Press button “OPEN” to load update file->

15-4
15-5

5  Select COM port(TWO WAYS TO SELECT COM PORT)->

5.1 Press button “AUTO”(way 1)

15-6

5.2 Manually choose(way 2)

15-7

How to get Port Number:
“My Computer”->Click the right mouse button->Manage->:

15-8

Device Manager->

15-9

Ports(COM&LPT)->

15-10

Find USB Serial Port->

15-11

COM port is COM3

How SKP-900 key programmer add Ford Focus remote key in 3 steps

This blog will manage customers to add Ford focus remote keys with SuperOBD SKP900 Hand-held Auto Key Programmer, just need 3 steps, spend you several minutes.

Vehicle: Ford Focus

Tool Used: SKP-900 auto key programmer

Detail steps:

Step1

Connect key programmer SKP-900 to the car. Enter “IMMOBILIZER” option and choose car model “FORD”→ “FOCUS”

Then choose “IMMOBILIZER2” and press YES to continue..

10-1

Follow the prompt turn ignition on and press YES to next step

10-2

Step2

Choose DELETE KEY to delete all registered keys.

10-3

Press YES to continue, after this step, all registered keys will be deleted, then you can program the new keys next.

10-4

10-5 10-6

Step3

Back to previous and choose “ADD KEY”

10-7

Inset a new key turn ignition on and press [YES] to continue

10-8

If you want to add one more key, follow step3

10-9

Succeed in programming Ford Focus remote key by using OBD II Scanner SKP-900 auto key programmer!

10-10

Finally, Exit the program and turn off the tool.

How to update SuperOBD SKP900 Key Programmer?

Do you need a clear tutorial for SKP-900 Update? This blog will guide you How to update SuperOBD SKP-900 Key Programmer step by step! Check below!

Step1. Download newest software from SuperOBD official website  www.obd2tool.com.

Step2. Connect SKP-900 key programmer to computer using the USB cable.

Register SKP-900 official website in member centre. Download the update software and unzip it to get the “update bin file”.

5-1

5-2

Step3. Extract SKP900 Update Tool V2.4 zip file and SKP900 USB Driver zip file. Now install SKP900 driver: go to “My Computer” → “Properties” → “Hardware” → “Device Manager”

5-3

The USB serial will not be found now. Click the “Scan” button to scan the hardware.

5-4

Step4. You will see a Found New Hardware Wizard for “USB-Serial”, click “Next”.

5-5

Check the checkbox “Include this location in the search” then click “Browse”. Choose “USB driver” folder then click “OK”.

5-6

Click “Next” then “Finish”.

Step5. There comes another Found New Hardware Wizard for “USB Serial Port”, choose the option “Install from a list or a special location”, click “Next”.

5-7

Click “Browse”, choose “USB driver” folder then click “OK”. Click “Next” then “Finish”.

Now SKP900 USB driver install completely.

5-8

Step6. Open Car Key Programmer SKP900 Update Tool V2.4 folder then open SKP900 Update Tool V2.4.

5-10

Open the update bin file then click “Update” to start SKP900 update. (Remember not to disconnect SKP-900 form computer while updating.)

5-11 5-12

The whole process will cost about 37 minutes, just be patient to wait it complete. And after that all OK, you can start to use newest SKP900 software !

How to Use SKP900 to Program ID46 Nissan Key

It is very easy to program id46 Nissan key with SuperOBD SKP-900 V5.0, it will tips you step by step.

Step 1: Use Main Cable to connect SKP900 Key Programmer and a Nissan OBD connector, start the car with a remote and wait a few seconds for SKP900 to start.

Step 2: Choose Nissan>>>New Structure>>>Yes to continue.

16-1

Step 3: Select Key 1 and choose Yes
16-2

Step 4: Select Immobilizer System according to the cars Immo and choose Yes.
16-3

Step 5: Wait for a few minutes until OBD2 key programmer SKP900 communicates with the car.

16-4

Step 6: Select Function then Key Adapt and choose Yes.

16-5

Step 7: The SKP-900 will tell you how to do, you should insert a new key and turn ignition on. You may see the IMMO indicator light will flash when inserting a key which cannot start engine. Select Yes.

Step 8: Close ignition switch and select Yes.

Step 9: Wait for system adapting and then open ignition switch and select Yes.

Step 10: Wait for a few minutes and the key is programmed successfully.

This is from obd2tool.com: Best car key tools for sale website  Auto Key Programmer technical support: How to Use SKP900 to Program ID46 Nissan Key

How to add Jeep Wrangler 2013 Remote Key by OBD

Here is the easy guide on programming Jeep Wrangler 2013 2-button straight remote key with ID46 chip by using SKP1000 key programmer via OBD from .

9-1

9-2

Connect SKP1000 Key Programmer with vehicle via OBD diagnosis socket under the dashboard through the main cable

(The menu here is in Chinese, English language is available as well)

9-3
Select Immobilizer system (Straight remote), you have 3 three function options under the menu, Add key, Delete key and read pin code. Add a key requires pin code, delete key does not need.

Here select Add a key
9-4

SKP-1000 key programmer at Obd2tool.com will read pin code via OBD automatically

9-5

Insert the key to be programmed

Turn ignition switch to ON position

9-6
Manually enter security code read previously

Follow skp 1000 prompt

Program success.

If need to program second key, select Add a key and repeat above procedure.

OBD2 key programmer SKP1000 will generate remote control automatically after program completed.

Note: You can also use 3 buttons straight remote key to add a key on this model. But need delete lost key data fist

(Guide) SuperOBD SKP-900 SKP900 program Honda Accord 2015 new key

This is an operation guide to program Honda Accord 2015 new key by using SKP900 Auto Key Programmer. Hope it helps!

5-0

First choose “Immobilizer” on main menu, select “Honda” then “System Type” then “Immobilizer 3”.

5-1
5-2

Next you will see Vehicle Selection, press Enter button to go on. It will remind you to turn ignition on. Turn on ignition and wait about 1 minute for system adapting.

5-3

After that choose “Add 1 pc key”

5-4

Turn on ignition Auto Key Programmer SKP900 show “Programming” then turn off ignition. Unplug the original key and insert the new key in 15 seconds.

5-5

Then use the new key to turn ignition on then off. Turn ignition on then off again. Now turn ignition on and wait. The immobilizer indicator will be off, press the Enter button to confirm.

5-6
5-7

Turn off the key and turn it on back. It will show “Adapt Key Success”.
5-8

Now car start OK and remote work with this new key programmed by SKP-900 key programmer from obd2tool.com!

SKP900 V5.0 add new Toyota Corolla H chip key OK

Is it possible SuperOBD SKP-900 V5.0 to make a new Toyota H chip key? How?
Yes, it’s newly tested SuperOBD SKP900 V5.0 program Toyota H chip for Toyota Corolla 2015 OK! (With a working key) Check below step by step!

How to make a new Toyota Corolla H chip remote key by SKP900 key programmer?

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-1.jpg

Part 1: SKP-900 Toyota H chip Key Programming
Use the original working key to turn on car ignition.
Power on Automotive Key Programmer SKP900 key programmer.
Go to “IMMOBILIZER” then select “TOYOTA”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-2.jpg

Choose “SYSTEM TYPE” and “IMMOBILIZER 2″.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-3.jpg

Tips show:
Turn ignition on?–Press “YES” button.
Insert the registered main key?– Press “YES” button.
Then use the new key you want to add to turn on car ignition. (The car immobilizer light will keep flashing)

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-5.jpg

When the immobilizer light stop flashing and turn off, key programming is successful!

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-7.jpg

Part 2: SKP-900 from OBD2TOOL Toyota H chip Key Match to complete key programming
Same procedure to the “SYSTEM TYPE” menu, choose “REMOTE”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-8.jpg

Go to “REMOTE SYSTEM 2″ then use the original working key to turn ignition on.
Now follow the instruction: open the driver’ side door, press the door unlock button and keep all other doors close.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-9.jpg

In 30 seconds you should press the new key both LOCK& UNLOCK buttons, then press the UNLOCK button once again.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-10.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-12.jpg

Now you successfully add a new Toyota H chip key for Corolla 2015!
Note: SKP900 now is in LOWEST price $378 free shipping!

New H chip remote key is working as the original!

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-13.jpg

(How-to) SKP900 V5.0 add new Toyota Corolla H chip key OK

Is it possible SKP900 to make a new Toyota H chip key? How?

Yes, it’s newly tested SuperOBD SKP900 V5.0 program Toyota H chip for Toyota Corolla 2015 OK! (With a working key) Check below step by step!

How to make a new Toyota Corolla H chip remote key by SKP900 key programmer?
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-1.jpg

Part 1: SKP-900 Toyota H chip Key Programming
Use the original working key to turn on car ignition.
Power on SKP900 key programmer
Go to “IMMOBILIZER” then select “TOYOTA”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-2.jpg

Choose “SYSTEM TYPE” and “IMMOBILIZER 2”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-3.jpg

Tips show:
Turn ignition on?–Press “YES” button.
Insert the registered main key?– Press “YES” button.
Then use the new key you want to add to turn on car ignition. (The car immobilizer light will keep flashing)
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-5.jpg
When the immobilizer light stop flashing and turn off, key programming is successful!

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-7.jpg

Part 2: SuperOBD SKP-900 Key Programmer Toyota H chip Key Match to complete key programming
Same procedure to the “SYSTEM TYPE” menu, choose “REMOTE”.

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-8.jpg
Go to “REMOTE SYSTEM 2” then use the original working key to turn ignition on.
Now follow the instruction: open the driver’ side door, press the door unlock button and keep all other doors close.

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-9.jpg
New H chip remote key is working as the original!
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-10.jpg
In 30 seconds you should press the new key both LOCK& UNLOCK buttons, then press the UNLOCK button once again.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-13.jpg

Key Programm Tool SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

Now you successfully add a new Toyota H chip key for Corolla 2015!