Mitsubishi Key Programming with FVDI2 SKP900 Lonsdor K518ISE

Mitsubishi key programming tutorial…Here you go.

Tips here including:

Part 1: How to do Mitsubishi key programming?

Part 2: How to choose a good Mitsubishi key programmer

option 1: FVDI2 Mitsubishi

option 2: SuperOBD SKP-900 Key Programmer

option 3: Lonsdor K518ISE

Part 3: Conclusion

Part 1: How to do Mitsubishi key programming?

Here,take 2014 Mitsubishi.

To program a spare key to your 2014 Mitsubishi, you need two keys that are already programmed and working on the vehicle. If you only have one operational key, your replacement key will require programming from your local dealer or a locksmith with the correct equipment (Part 2 will help choose a working Mitsubishi key programmer). This procedure should also work for many other Mitsubishi models.

Standard Key (Non-Push-to-Start Models)

step 1:
Enter the vehicle and shut the door. Insert the first working key into the ignition and turn it to the “On” position. Wait five seconds, then turn the ignition off and remove the key.

step 2:
Insert the second working key within 20 seconds of removing the first, then turn it to the “On” position. Observe the immobilizer light on the instrument cluster, and shut off the ignition when the light begins to blink.

step 3:
Insert the new key to be programmed into the ignition within 20 seconds and turn it to the “On” position. Observe the immobilizer light. Turn the ignition off when the light illuminates solid for 30 seconds then turns off. Test operation of the key. Repeat this procedure for any additional spare keys you would like to program.

F.A.S.T. Key Programming

step 1:

Sit in the vehicle with both valid F.A.S.T keys and the key you wish to program. Press the push-to-start button to turn the system on, but don’t start the engine.

step 2:

Press the unlock button on the first working F.A.S.T key and hold it. After four seconds, press and hold the lock button while holding the unlock button. Within 10 seconds of pressing the lock button, release it, then release the unlock button. Repeat this step within 30 seconds with the second working F.A.S.T key.

step 3:

Observe the immobilizer light on the instrument cluster. It will blink, then turn solid for 30 seconds. Your new key is programmed when you see the immobilizer light turn off and you hear a buzzer sound for three seconds. Repeat this section for any other F.A.S.T. keys you wish to program.

Part 2: How to choose a good Mitsubishi key programmer

option 1: FVDI2 Mitsubishi

20-01

The key programming function currently works by CAN. Please, see below the supported vehicles. In the next versions we will add more vehicles to this list FREE for all customers who own the key learning function. We also plan to support vehicles with KLine interface.

Keys can be programmed when the pin code of the vehicle is known. The Mitsubishi Commander has a database of default pin codes. The pin code can be changed with the Mitsubishi Commander. If the pin code is changed – next time when a key is programmed the new pin code should be entered.

20-02

FVDI2 key programmer now works on Mitsubishi by CAN only.But more vehicles will be added/updated to this list and it’s FREE for all customers who own the key learning function. We also plan to support vehicles with KLine interface.

Keys can be programmed when the pin code of the vehicle is known. The Mitsubishi Commander has a database of default pin codes. The pin code can be changed with the Mitsubishi Commander. If the pin code is changed – next time when a key is programmed the new pin code should be entered.

FVDI2 Mitsubishi Car List:
L200 (2006-2011)
L200 Hunter (2011+)
Mitsubishi 380 (2006-2009)
Mitsubishi Challenger (2009-2012)
Hunter (2007-2011)
Pajero (2006-2011)
Grandis (2006-2011)
Shogun (2006-2011)
Montero (2006-2011)
Eclipse (2006-2011)
Galant (2006-2011
Endeavor (2006-2011)
Lancer (2007-2011)
Lancer Evolution (2008-2011)
Outlander (2007-2011)
Colt (2006-2011)
Raider
ASX
Triton

option 2: SuperOBD SKP900

20-03
It is very easy to use a Auto Key Programmer SKP900 key programmer to add new keys… Just follow the screen instruction with four arrow buttons, YES/NO button, and keyboard button. No more worry about operation before this. Kids can do it

SKP900 Mitsubishi list

20-04

example here

Program Lancer year 2012 key using SKP-900

20-1 20-2 20-3 20-4 20-5 20-6 20-7

20-8 20-9 20-10 20-11 20-12 20-13 20-14 20-15
option 3: Lonsdor K518ISE

20-16

K518ISE Mitsubishi list select by system:

20-17

K518ISE Mitsubishi vehicle list select by region:

Lots of Mitsubishi cars are updated on March 21, 2018.

Now, it supports Mitsubishi from the North American, South American and Europe.

Lonsdor K518ise Mitsubishi Car List:

Mitsubishi from America:

Mitsubishi\Select from vehicle\America\South America\ASX

Mitsubishi\Select from vehicle\America\South America\Diamonte

Mitsubishi\Select from vehicle\America\South America\Eclipse

Mitsubishi\Select from vehicle\America\South America\Eclipse[CAN]

Mitsubishi\Select from vehicle\America\South America\Endeavor

Mitsubishi\Select from vehicle\America\South America\Endeavor[CAN]

Mitsubishi\Select from vehicle\America\South America\EVO

Mitsubishi\Select from vehicle\America\South America\Galant

Mitsubishi\Select from vehicle\America\South America\Galant[CAN]

Mitsubishi\Select from vehicle\America\South America\Lancer

Mitsubishi\Select from vehicle\America\South America\Lancer[CAN]

Mitsubishi\Select from vehicle\America\South America\Montero

Mitsubishi\Select from vehicle\America\South America\Montero[CAN]\2007

Mitsubishi\Select from vehicle\America\South America\Outlander

Mitsubishi\Select from vehicle\America\South America\Outlander(2013)

Mitsubishi\Select from vehicle\America\South America\Outlander[CAN]

Mitsubishi\Select from vehicle\America\South America\Outlander\Pajero\v97\v98

Mitsubishi\Select from vehicle\America\South America\Outlander\Rvr\2012

Mitsubishi from Europe:

Mitsubishi\Select from vehicle\Europe\3000gt

Mitsubishi\Select from vehicle\Europe\ASX

Mitsubishi\Select from vehicle\Europe\Carisma

Mitsubishi\Select from vehicle\Europe\Colt Lander

Mitsubishi\Select from vehicle\Europe\Eclipse

Mitsubishi\Select from vehicle\Europe\EVO

Mitsubishi\Select from vehicle\Europe\Galant Wagon

Mitsubishi\Select from vehicle\Europe\Galant\1996-2004

Mitsubishi\Select from vehicle\Europe\Grandis

Mitsubishi\Select from vehicle\Europe\I-miev

Mitsubishi\Select from vehicle\Europe\L200

Mitsubishi\Select from vehicle\Europe\L200[CAN]\2011-

Mitsubishi\Select from vehicle\Europe\L400

Mitsubishi\Select from vehicle\Europe\Lancer

Mitsubishi\Select from vehicle\Europe\Lancer Sportback

Mitsubishi\Select from vehicle\Europe\Lancer Wagon

Part 3: Conculsion

In summary, Mitsubishi key programming can be done with all key tools above.

But how to choos the one you need indeed?

Here are some tips for- better read it before you decide to have a Mitsubishi key programmer.

Have a FVDI2 ABRITES Commander for Mistubishi if you have Mitsubishi only. FVDI2 is able to not only add new keys but also help diagnostic tests. Good for DIYers.

Have a SuperOBD SKP900 or Lonsdor K518ISE if you are a locksmith or have many cars need program new keys. SKP900 is popular and receive good feedback.People with it never upset themselves. But, SuperOBD is gonna stop SK900 production so it’s not good for future cars. The last, Lonsdor K518ise wins. It’s a professional universal key programming in the the year 2017 and 2018.

How to Choose A Good Mitsubishi Key Programmer?

Related posts:

Lonsdor K518ISE Auto Key Programmer Car List
How to Generate 2 Remote Keys for Mitsubishi Triton 2007
Launch X431 program Mitsubishi Outlander 09 all key lost
How to Register Mitsubishi Outlander 07 Immo Key with MUT-III

FVDI2
Lonsdor K518
Lonsdor K518ISE
Mitsubishi key programmer
skp900

Previous article
Next article
Search for:

SKP900 Update software

1  Connect your SKP900 Key Programmer to PC via USB Cable, and do not make any operation as follows:

15-1

2  Select “FUNCTION UPDATA” in main Menu and press [YES]:

15-2

3  Run “Auto Key Programming SuperOBD SKP-900 Update Tool.exe”

15-3

4  Press button “OPEN” to load update file->

15-4
15-5

5  Select COM port(TWO WAYS TO SELECT COM PORT)->

5.1 Press button “AUTO”(way 1)

15-6

5.2 Manually choose(way 2)

15-7

How to get Port Number:
“My Computer”->Click the right mouse button->Manage->:

15-8

Device Manager->

15-9

Ports(COM&LPT)->

15-10

Find USB Serial Port->

15-11

COM port is COM3

How SKP-900 key programmer add Ford Focus remote key in 3 steps

This blog will manage customers to add Ford focus remote keys with SuperOBD SKP900 Hand-held Auto Key Programmer, just need 3 steps, spend you several minutes.

Vehicle: Ford Focus

Tool Used: SKP-900 auto key programmer

Detail steps:

Step1

Connect key programmer SKP-900 to the car. Enter “IMMOBILIZER” option and choose car model “FORD”→ “FOCUS”

Then choose “IMMOBILIZER2” and press YES to continue..

10-1

Follow the prompt turn ignition on and press YES to next step

10-2

Step2

Choose DELETE KEY to delete all registered keys.

10-3

Press YES to continue, after this step, all registered keys will be deleted, then you can program the new keys next.

10-4

10-5 10-6

Step3

Back to previous and choose “ADD KEY”

10-7

Inset a new key turn ignition on and press [YES] to continue

10-8

If you want to add one more key, follow step3

10-9

Succeed in programming Ford Focus remote key by using OBD II Scanner SKP-900 auto key programmer!

10-10

Finally, Exit the program and turn off the tool.

How to update SuperOBD SKP900 Key Programmer?

Do you need a clear tutorial for SKP-900 Update? This blog will guide you How to update SuperOBD SKP-900 Key Programmer step by step! Check below!

Step1. Download newest software from SuperOBD official website  www.obd2tool.com.

Step2. Connect SKP-900 key programmer to computer using the USB cable.

Register SKP-900 official website in member centre. Download the update software and unzip it to get the “update bin file”.

5-1

5-2

Step3. Extract SKP900 Update Tool V2.4 zip file and SKP900 USB Driver zip file. Now install SKP900 driver: go to “My Computer” → “Properties” → “Hardware” → “Device Manager”

5-3

The USB serial will not be found now. Click the “Scan” button to scan the hardware.

5-4

Step4. You will see a Found New Hardware Wizard for “USB-Serial”, click “Next”.

5-5

Check the checkbox “Include this location in the search” then click “Browse”. Choose “USB driver” folder then click “OK”.

5-6

Click “Next” then “Finish”.

Step5. There comes another Found New Hardware Wizard for “USB Serial Port”, choose the option “Install from a list or a special location”, click “Next”.

5-7

Click “Browse”, choose “USB driver” folder then click “OK”. Click “Next” then “Finish”.

Now SKP900 USB driver install completely.

5-8

Step6. Open Car Key Programmer SKP900 Update Tool V2.4 folder then open SKP900 Update Tool V2.4.

5-10

Open the update bin file then click “Update” to start SKP900 update. (Remember not to disconnect SKP-900 form computer while updating.)

5-11 5-12

The whole process will cost about 37 minutes, just be patient to wait it complete. And after that all OK, you can start to use newest SKP900 software !

How to Use SKP900 to Program ID46 Nissan Key

It is very easy to program id46 Nissan key with SuperOBD SKP-900 V5.0, it will tips you step by step.

Step 1: Use Main Cable to connect SKP900 Key Programmer and a Nissan OBD connector, start the car with a remote and wait a few seconds for SKP900 to start.

Step 2: Choose Nissan>>>New Structure>>>Yes to continue.

16-1

Step 3: Select Key 1 and choose Yes
16-2

Step 4: Select Immobilizer System according to the cars Immo and choose Yes.
16-3

Step 5: Wait for a few minutes until OBD2 key programmer SKP900 communicates with the car.

16-4

Step 6: Select Function then Key Adapt and choose Yes.

16-5

Step 7: The SKP-900 will tell you how to do, you should insert a new key and turn ignition on. You may see the IMMO indicator light will flash when inserting a key which cannot start engine. Select Yes.

Step 8: Close ignition switch and select Yes.

Step 9: Wait for system adapting and then open ignition switch and select Yes.

Step 10: Wait for a few minutes and the key is programmed successfully.

This is from obd2tool.com: Best car key tools for sale website  Auto Key Programmer technical support: How to Use SKP900 to Program ID46 Nissan Key

How to add Jeep Wrangler 2013 Remote Key by OBD

Here is the easy guide on programming Jeep Wrangler 2013 2-button straight remote key with ID46 chip by using SKP1000 key programmer via OBD from .

9-1

9-2

Connect SKP1000 Key Programmer with vehicle via OBD diagnosis socket under the dashboard through the main cable

(The menu here is in Chinese, English language is available as well)

9-3
Select Immobilizer system (Straight remote), you have 3 three function options under the menu, Add key, Delete key and read pin code. Add a key requires pin code, delete key does not need.

Here select Add a key
9-4

SKP-1000 key programmer at Obd2tool.com will read pin code via OBD automatically

9-5

Insert the key to be programmed

Turn ignition switch to ON position

9-6
Manually enter security code read previously

Follow skp 1000 prompt

Program success.

If need to program second key, select Add a key and repeat above procedure.

OBD2 key programmer SKP1000 will generate remote control automatically after program completed.

Note: You can also use 3 buttons straight remote key to add a key on this model. But need delete lost key data fist

(Guide) SuperOBD SKP-900 SKP900 program Honda Accord 2015 new key

This is an operation guide to program Honda Accord 2015 new key by using SKP900 Auto Key Programmer. Hope it helps!

5-0

First choose “Immobilizer” on main menu, select “Honda” then “System Type” then “Immobilizer 3”.

5-1
5-2

Next you will see Vehicle Selection, press Enter button to go on. It will remind you to turn ignition on. Turn on ignition and wait about 1 minute for system adapting.

5-3

After that choose “Add 1 pc key”

5-4

Turn on ignition Auto Key Programmer SKP900 show “Programming” then turn off ignition. Unplug the original key and insert the new key in 15 seconds.

5-5

Then use the new key to turn ignition on then off. Turn ignition on then off again. Now turn ignition on and wait. The immobilizer indicator will be off, press the Enter button to confirm.

5-6
5-7

Turn off the key and turn it on back. It will show “Adapt Key Success”.
5-8

Now car start OK and remote work with this new key programmed by SKP-900 key programmer from obd2tool.com!

SKP900 V5.0 add new Toyota Corolla H chip key OK

Is it possible SuperOBD SKP-900 V5.0 to make a new Toyota H chip key? How?
Yes, it’s newly tested SuperOBD SKP900 V5.0 program Toyota H chip for Toyota Corolla 2015 OK! (With a working key) Check below step by step!

How to make a new Toyota Corolla H chip remote key by SKP900 key programmer?

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-1.jpg

Part 1: SKP-900 Toyota H chip Key Programming
Use the original working key to turn on car ignition.
Power on Automotive Key Programmer SKP900 key programmer.
Go to “IMMOBILIZER” then select “TOYOTA”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-2.jpg

Choose “SYSTEM TYPE” and “IMMOBILIZER 2″.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-3.jpg

Tips show:
Turn ignition on?–Press “YES” button.
Insert the registered main key?– Press “YES” button.
Then use the new key you want to add to turn on car ignition. (The car immobilizer light will keep flashing)

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-5.jpg

When the immobilizer light stop flashing and turn off, key programming is successful!

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-7.jpg

Part 2: SKP-900 from OBD2TOOL Toyota H chip Key Match to complete key programming
Same procedure to the “SYSTEM TYPE” menu, choose “REMOTE”.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-8.jpg

Go to “REMOTE SYSTEM 2″ then use the original working key to turn ignition on.
Now follow the instruction: open the driver’ side door, press the door unlock button and keep all other doors close.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-9.jpg

In 30 seconds you should press the new key both LOCK& UNLOCK buttons, then press the UNLOCK button once again.

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-10.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/08/1/26-12.jpg

Now you successfully add a new Toyota H chip key for Corolla 2015!
Note: SKP900 now is in LOWEST price $378 free shipping!

New H chip remote key is working as the original!

http://forobd2tool.com/wp-content/uploads/2017/08/1/26-13.jpg

(How-to) SKP900 V5.0 add new Toyota Corolla H chip key OK

Is it possible SKP900 to make a new Toyota H chip key? How?

Yes, it’s newly tested SuperOBD SKP900 V5.0 program Toyota H chip for Toyota Corolla 2015 OK! (With a working key) Check below step by step!

How to make a new Toyota Corolla H chip remote key by SKP900 key programmer?
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-1.jpg

Part 1: SKP-900 Toyota H chip Key Programming
Use the original working key to turn on car ignition.
Power on SKP900 key programmer
Go to “IMMOBILIZER” then select “TOYOTA”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-2.jpg

Choose “SYSTEM TYPE” and “IMMOBILIZER 2”.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-3.jpg

Tips show:
Turn ignition on?–Press “YES” button.
Insert the registered main key?– Press “YES” button.
Then use the new key you want to add to turn on car ignition. (The car immobilizer light will keep flashing)
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-5.jpg
When the immobilizer light stop flashing and turn off, key programming is successful!

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-7.jpg

Part 2: SuperOBD SKP-900 Key Programmer Toyota H chip Key Match to complete key programming
Same procedure to the “SYSTEM TYPE” menu, choose “REMOTE”.

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-8.jpg
Go to “REMOTE SYSTEM 2” then use the original working key to turn ignition on.
Now follow the instruction: open the driver’ side door, press the door unlock button and keep all other doors close.

http://forobd2tool.com/wp-content/uploads/2017/06/13/5-9.jpg
New H chip remote key is working as the original!
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-10.jpg
In 30 seconds you should press the new key both LOCK& UNLOCK buttons, then press the UNLOCK button once again.
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/5-13.jpg

Key Programm Tool SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

Now you successfully add a new Toyota H chip key for Corolla 2015!