How to Set LAN Network for Porsche PIWIS II Software

Here is a guide on how to set LAN & WLAN network for Porsche Piwis2 diagnostic software.

Preparations:

Porsche PIWIS 2 V18.15 V17.500 Free Download
How to Install/Restore Porsche PIWIS 18.100 Universal Image

Part 1: Porche PIWIS II LAN Network Setting
Part 2: Porche PIWIS II WLAN Network Setting

Part 1: Porche PIWIS II LAN Network Setting

1.Click [SETTINGS]->[Network settings]

How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-1
How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-2

2.Click [LAN],then Select a network card

How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-3
How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-4

3.Obtain ip address automatically:select [Obtain IP address automatically] and [Obtain DNS server address automatically],then click [Save]

How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-5
How-to-Set-LAN-Network-for-Porsche-PIWIS-II-Software-6

4.Manually settings IP address : select [Use following IP addresses] and [Use following DNS server addresses],then input IP address,subnet mask,standard gateway,Preferred DNS Server,then click [Save]

Part 2: Porche PIWIS II WLAN Network Setting

1.Click [SETTINGS]->[Network settings]


2.Click [WLAN],then Select a network card

3.Click [Search],then click select Network name,and input Network Key

4.Obtain ip address automatically:select [Obtain IP address automatically] and [Obtain DNS server address automatically],then click [Save]

5.Manually settings IP address : select [Use following IP addresses] and [Use following DNS server addresses],then input IP address 、subnet mask 、standard gateway 、Preferred DNS Server , then click [Save]

Does Porsche Piwis Tester II Piwis 2 Support Porsche Cayenne Turbo 2003

Hi, I m looking at getting the complete professional Porsche Piwis2 for a Porsche Cayenne Turbo 2003. If the Piwis II kit can function for multiple other véhicule that would really good to but Piwis II must be specifically functioning on The Porsche Cayenne Turbo of 2003-2004 I would like to ensure that I m buying the correct tool. The idea is to be able to perform all necessary trouble shooting, repairs and services as Porsche would. Including Engine and all auxiliary systems Would you be able to guide me on which set to purchase?

Porsche-Cayenne-Turbo-2003

One of customer check the Piwis2 review found client leave message to check Whether Piwis 2 support 2003-2004 cars, below we offer Porsche diagnostic solution as following for client.

The Piwis II wih latest V18.150 Piwis II software work for the newer car, if you need work on Porsche old car, we can offer you V14 Piwis2 software for it, you can also choose a new version Piwis2 software HDD for newer car till 2017.

The Piwis2 software have instruction user manual come with, you can work on it no problem. Any question just let me know freely.

Porsche Carrera 4S Sport Exhaust Trouble

A Porsche Carrera 4S made 2014 MA engine with 15 thousands miles,the owner discribed that no chagning voice of the sport exhaust.And technicians found the valve of rear muffler keep closed,and no chagning voice of the sport exhaust.This article talk about topic of how to solved Porsche Carrera 4S sport exhaust trouble.

Diagnosis of Trouble:

Here comes a structural schematic diagram of Porsche sport exhaust system,show as below:

Porsche-Carrera-4S-Sport-Exhaust-Trouble

1.Front muffler
2.Connector
3.central exhaust valve adjusted
4.each cylinder equipped a main muffler  5.Dual-outlet exhaust

Only follow the requirement to press one of below buttons in the sport exhaust system your vehicle equipped,can you start or stop switch mode from exhaust valve to Acoustic performance optimization.
1. “Sport” button
2. “Sport Plus” button
3. “Sport exhaust system” button

It is the same as the Porschediagnostic tool Carrera S,we need to follow the requirement to start exhaust valve by diagram of DME unit.In this case,DME control unit sent the CAN signal to gateway,it receives the signal from controller and AC unit by CAN.The gateway sent the signal to next electronics,then it enable the electronic control pneumatic switching valve.

According to the fault syptoms and schematics,we can determine the possible reasons:
1. Solenoid valve of control valve trouble
2. Valve vacuum pipe failure
3. Sport valve trouble

Connect the PIWIS to vehicle and found the trouble code”80730E”

Porsche Piwis2 V18.15 V17.500 Free Download

It mean:exhaust valve of rear muffler trouble

And after testing found exhaust voice did not chage.Disconnect the vacuum tube,it did not generate vacuum when opening or closing the switch of exhaust,it implied that solenoid valve of control valve trouble.

Located the right rear solenoid valve,it was damaged.

Solution:Replace a new solenoid valve.

How To Set the Piwis Tester II Scanner Self-Test Mode

On the Piwis Tester 2 V18.150.500 Piwis 2 software, the Self-test mode default setting off, How to turn Porsche Piwis ii for Porsche diagnostic tool self-test mode? Below we share the Piwis Tester 2 Self-Test Mode Turn On & Off Guide as follow.

Piwis Tester 2 For Porsche Diagnostic & Programming Tool

3 Steps To Set Up Piwis Tester 2 Self-Test Mode Guide?

Clients can set the Piwis 2 Porsche scanner self-test mode by means of this parameter.

When you have saved the corresponding setting, the diagnostic application will then be started with this configuration from this point on.

1.Start the Piwis II control application and select the category “Mode” in the menu bar:

2. Click next to the entry Self-test in the field Value (A) and select the corresponding entry in the drop-down menu by clicking on the corresponding option once (B).

How-To-Set-the-Piwis-Tester-II-Scanner-Self-Test-Mode

The following options are available:
Off
When the application starts, Piwis 2 self-test will not perform
On
The self-test is performed when the application is started

3. Save the setting by pressing the button.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners just contact us freely.

And welcome client writes down Piwis 2 Sanner reviews under our product, just contact us sales@obd2tool.com freely.

How to accomplish Piwis Tester II online function

Q1: How to accomplish Piwis Tester II online function?
A1:  Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about  Piwis Tester II?
A2:  Porsche Piwis 2 timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?
A3: The first year software update fee is free.

Q4: How to update  Piwis Tester II at Obd2tool.com?
A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?
A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?
A6: To support ONLINE function, valid certificate must be available for  Piwis Tester II.

Q7: Where could get Laptop Power-on Password?
A7:  Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

Porsche-PIWIS-TESTER-II-6 Porsche-PIWIS-TESTER-II-7 Porsche-PIWIS-TESTER-II-8 Porsche-PIWIS-TESTER-II-9 Porsche-PIWIS-TESTER-II-10 Porsche-PIWIS-TESTER-II-11

Porsche-PIWIS-TESTER-II-11

Piwis Tester II For Porsche Diagnostic Reviews

Advice for Porsche Piwis 2 Porsche Diagnostic Tool

With the hot sale of Porsche Piwis Tester 2, we have accumulated too many comments for Porsche Piwis tester 2, below we share the clients’ Porsche Piwis tester 2 reviews below as advice for Porsche Diagnostic Tool Piwis tester.

Porsche Piwis tester II with v18.150.500 Piwis Software Installed on Laptop Ready to Use

Porsche piwis tester II with Piwis software installed panasonic cf30 laptop p Piwis Tester II For Porsche Diagnostic Reviews

Piwis Tester II Porsche Diagnostic Tool Reviews:

Piwis tester II for my Cayenne 2011 work perfect, I purchase it for my own, I was looking for Piwis 3 before, sales representative Emily suggest me Porsche Piwis 2 is enough for my need, and offer me the user manual for the guide. Thanks for customer service.

My Allscanner Porsche Piwis Tester 2 cannot support online programming so that I have to order the new Porsche Piwis 2 replace it, I purchased the Porsche Piwis Tester 2 online programming for Porsche Panamera hybrid 2012 3.0 V6 Engine, all be done, thanks very much

I get the complete professional Piwis Tester 2 Porsche Diagnostic Tools kit for a Porsche Cayenne Turbo 2003. If the kit can function for multiple other véhicule that would really good to but it must be specifically functioning on The Porsche Cayenne Turbo of 2003-2004. The Porsche Piwis tester II kit is to be able to perform all necessary troubleshooting, repairs, and services as Porsche would. Including Engine and all auxiliary systems.

Hello, I’ve got a Professional Diagnostic Tool Porsche Piwis Tester 2 software V18.100 update software download link, from the instruction you offer, I need to burn the files into DVD, right? I prefer to order new Porsche Piwis Tester 2  HDD for my Porsche Piwis Tester 2 , more simple and easier, you know I have pool knowledge for operating. Anyway, thanks to your excellent warranty as promise!

We will post more Porsche Piwis Tester 2 more reviews later, any question about Porsche Piwis Tester 2 before your order just inquiry us freely. Thanks!

Piwis Tester II Control unit list Control unit overview

This section of Piwis Tester II describes how you can display the control units installed in the vehicle in a control unit overview by means of a control unit search.

The basis for this is an existing ODX project in which the control unit-specific data is stored. The system must check whether a control unit of the project is installed in the vehicle and what variant this is.

After a user action, the diagnostic application first performs a control unit search. The list of all or selected control units and their status is then shown in the control unit overview.

Action-specific buttons for this function group

10-1
Process with vehicle communication

1. After the application has been started successfully, the list of control units for the respective ODX project is displayed in a control unit list.

10-2

There are two possibilities for selection of control units:

2. Select the desired control units by marking them. If you would like to deselect a selected control unit again, click again in the corresponding line.
10-3

3. The complete selection can be cancelled again by pressing the <F6> button.
10-4

4. Then press the <F12> button to start the control unit search. The system now checks which control units or selected control units of the project can be addressed.

10-5

5. If you would like to perform a control unit search for all control units, press the <F12> without previously selecting a control unit. The Porsche PIWIS TESTER II system then checks which control units or selected control units of the project can be addressed.

10-6

Display of search results

The list of addressable control units is then displayed in the control unit overview. Depending on which selection variant you have selected, the list is displayed similarly to the list form shown in step 6 or step 7.

6. Display with previous selection (variant 1): Control units that were previously selected in the control unit list and are addressable are already preselected in the control unit overview.

10-7

7. Display without previous selection (variant 2): All addressable control units are displayed. The control units are not marked.

10-8

Note on display:
Control units for which no variant is detected are identified by a  icon in the Status column. The data of the basic variant is displayed for control units that are labelled in this way. Control units that have a fault memory entry are identified by a ! icon in the DTC column.

8. If it should not be possible to establish communication with a control unit, this is indicated by dashes in the list after the control unit name (A). These Professional Diagnostic Tool are greyed out and cannot be selected. Subcomponents of control units (so-called ECU-subcomponents) are shown indented below the respective control unit (B). You can work with these subcomponents in the same way as with the regular control units (also see additional information below).

10-9

Note on display of subcomponents
If a higher-order control unit has subcomponents and you select a higher-order control unit and then change to a different function group or function, all subcomponents are implicitly selected as well. However, if you mark a subcomponent or several subcomponents and then change to another function group or function, any further action will be performed only for this selection.

Example:
You select the control unit Gateway and change to another function group. In addition to the main control unit Gateway, the following subcomponents are then also displayed in this function group:

Battery condition,Main fuse box, Intelligent battery sensor, Electric energy management (eEM) In contrast, if you have selected only the subcomponent Intelligent battery sensor and change to another function group, only this element is made available for a further action in this function group.

Next steps

9. Now select the control units for which you would like further information from the list of control units. If you would like to deselect a selected control unit again, click in the corresponding line once more(A). The complete selection can be cancelled again by pressing the <F6> button (B).

10-10

Notes on selectability of function groups

* All function groups are available if you have selected at least one control unit or one subcomponent.
* No function group can be selected if you have not made an explicit selection.

Notes on selectability of all control unit with fault memories

10. Press the <F8> button if you wish to select all control units that have a fault memory entry.

10-11

Process without vehicle communication (special procedure for View mode)

If diagnosis if performed in View mode, there is no communication with the vehicle via a VCI.
The variant detection process that normally takes place as part of the control unit search is
omitted as there is no vehicle communication.
In order to nevertheless access the data on the respective control unit variant, you must
select the variant in the control unit list. Proceed as follows:

1. Click in the Control unit (A) column for the respective control unit and select a control unit variant for each control unit via a drop-down menu (B). If you would like to have the basic variant displayed for the respective control unit, select the first/top entry in the drop-down menu. The complete selection can be cancelled again by pressing the <F6> button.

10-12

2. Then press the <F12> button.

10-13

3. All selected control unit variants or control unit basic variants are displayed.
10-14

4. Do not select a control unit if you would like to have the basic variant displayed for all control units. Then press the <F12> button.

10-15

5. The control unit basic variants are displayed.

10-16

6. The functions described in section 8.2 ff are then available, with the following restrictions:

How to code Porsche 997.1 steering wheel to 997.2’s

1-1

997.1 upgrade to 997.2 steering wheel control module (997.613.289.01 or 997.613.299.01) need coding with Porsche Piwis ii following this step:

1. Select “special functions” and do a “vehicle handover”.

2. The “vehicle handover” runs automatically. When prompted if the car is new, select “no” and then confirm your chassis number (VIN). The “vehicle handover” is needed for recognizing your new steering wheel unit, so that all other control modules are able to communicate with it.

3. Select to “steering col. switch” unit and read and erase all fault memories. Then switch to “codings” and set “Automatic (Tiptronic/PDK)” and “PDK” (both!) to “installed”. Also set all your other values to “installed” if the car is equipped with them (for example speed control system).

4. Then select “PSM” unit and read and erase all fault memories. After that read your security code (The security code is read with the OBD2 Scanner PIWIS2
under menu item “Actual values”) and do a steering-wheel-sensor-calibration (security code is needed here). (some cars need this calibration clear PSM faults)

5. At last: Erase all fault memories and then have fun while driving a Tiptronic car with PDK-Paddles

Why buy Samtec VCI Piwis 2 from obd2tool

Why buy Samtec VCI Piwis 2 from obd2tool
1. Original Semtec project interface, can update, not J2534 or bad clone can’t update or locked (choose a best one will save your money and save your time! got a poor quality one after 2-3 month broken, then should send it back to repair. it will lost shipping cost, lost device for diagnosis, lost business!)
PS: Famous OBD forum mhh Cartechlogy AP recommended version!
2. Full access to porsche Development verison!
3. Version: v18.150 support 2017 Porsche cars
4. Bluetooth, GPS and Navigation Function are available. can modify in Engineer mode.
5. Certificate is well installed, our Piwis II supports Online Functions, only two functions need to work online: Teach keys immo function and Parts protection function.

If need Porsche Piwis Tester II installed software ready to use, could check V18.1 Piwis tester ii Vci Samtec interface with panasonic cf-30 laptop
Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch

Piwis II User Notice:

1. After finish diagnostic, please quit the connection, and quit to the homepage of the software, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged).
2. This Piwis2 we sell is best quality and it is Semtec Hardware, which is 100% same as the porsche dealer has, not J2534 hardware, the J2534 FTDI hardware comes with different PCB, and it has no certification make it is not able work with all modules, not support online functions.

PIWS Tester 2 Make Porsche Key Learning Online Custom Share

One User of Porsche Piwis ii for Porsche diagnostic tools from obd2tool.com share his experience on using the piwis tester ii  to do trouble diagnostic and key learning function with Porsche Cayenne model year 2011.

“I use mine daily… updates… OEM DVD’s

Only thing that you cannot do is Panamera and newer car Ignition key adaptations.

They are working on an offline solution for this.”

(This user and many other users don’t know,Piwis 2 can make Key Learning Online.)

“I′ve bought one yanhua version Piws tester 2 with Panasonic CF30 around €1059.00, works really great and stable!

SW is 17.100 V with one Year free Update

It has a Team Viewer on Board, so they can update and make Key Learning Online.”

Then how to make Professional Diagnostic Tool PIWS tester2 key learning online?

You need an account to do that. If you need to get it, contact cartool.co.uk customer service and provide them the model key type and makeyear of your Porsche car, they will provide you the Porsche key learning service online.
If you need online programming, we recommend you buy Yanhua Piws tester2 SP161-YH, it supports off-line programming, key programming as well. And the online programming service cost 220USD per time.
If you need wireless connection, we recommend you buy WIFI version Piws Tester II SP161-W.

15-1 15-2 15-3 15-4