Autel MaxiSYS Pro MS908P Key Erase Issue on 2000 Ford Focus (fixed)

10-1

Write this blog to share my problem about Maxisys Pro MS908P key erasure on 2000 ford focus and its solution with you

10-2

2000 Ford Focus Z-Tech Diagnostic tool used:

Autel MaxiSYS MS908P Issue description:

I intended to replace the PCM in my vehicle With followed all the instruction for key erasure, the Autel Scan Tool MS908P seemed to freeze at the 9 second make on the task bar

Reasons:

The engine told me that I could only program new third key with having 2 already programmed keys, which meant that I couldn’t program new key if I did not have 2 working Keys

Solution:

1.Download the beta version V6.12.10 to have a test.

2.Try to program key manually. The process bar will appear for 10s after key erasure. Please ignition off and program it as followed

Turn the ignition key to position 0

Cycle keyl in the ignition from OFF to RUN for at least 3 seconds

Cycle key2 in the ignition from OFF to RUN for at least 3 seconds

Cycle keyl in the ignition from OFF to RUN for at least 3 seconds

Two keys are programmed now

Original Autel MaxiSys Pro MS908P One year Update Service

Original Autel MaxiSys Pro MS908P MaxiSys Elite MS906 MS906BT One year Update Service

Obd2tool.com provide One year Update Service for Autel Maxisys Pro MS908P Elite MS906 MS906BT MS906TS. We are Autel authorized dealer. Purchasing from us, you will get 100% genuine, one year free update and warranty.

Update Cost:

Autel MaxiSys Elite 1 year online update : $1000 USD

Autel MaxiSys Pro MS908P 1 year online update : $900 USD

Autel MaxiSys MS908 1 year online update : $750 USD

Autel MaxiSys MS906 1 year online update : $550 USD

Autel MaxiSys MS906BT 1 year online update : $550 USD

Autel MaxiSys MS906TS 1 year online update : $650 USD

Autel DS808 DS808Kit 1 Year Online Update : $400 USD

After you place an order on our website and check out, please provide us your device serial number. We will inform you by email after we extend one year update authorization for you or we can send the update license to you via Email. It is so easy to operate, no need shipping.

Features

1.Perfect diagnostic solution for shops and technicians who demand unrivalled smart technology and repairs

2.Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes

3.Compatible with only the Autel MaxiSys Pro MS908P Maxisys MS906 MS906BT MS906TS

Includes

1 Year Software Update for Auto Diagnostic Scanner MS908P MaxiSYS Pro MS908P MS906 MS906BT MS906TS

if your any of your MaxiSys tool is over warrantry for free update, you can buy this service to get update online.

 

http://www.obd2tool.com/article-214-Original+Autel+MaxiSys+Pro+MS908P+One+year+Update+Service.html

Steps on AUTEL MaxiSYS Pro MS908P BMW E46 Diagnosis

Autel Maxisys Pro comes with all of necessary adaptors for 1996 & newer vehicles, software for Domestic, Asian, & European vehicles (J-2534 manufacturer updates sold separately) and cables needed to get the job done, as well as one year of FREE updates.Here is the detailed steps on how to diagnose BMW with AUTEL MaxiSYS Pro MS908P.

New AUTEL MaxiSYS Pro MS908P Diagnostic System with WiFi Free Shipping on WBTOOLS

25-1

1.Connection with car model.Start the machine and choose BMW brand.Turn off igition.Wait approx 10 seconds.Switch on igition again.

25-2
2.Choose detailed car model.Eastabling vehicle communication.

25-3

3.After select the right car model,click diagnosis>>>Auto Scan.

25-4

4.Save the scan result.You can also print out the result.

25-5

5.For other functions,you can check from the screen.

25-6 25-7 25-8 25-9 25-10 25-11 25-12 25-13

Autel MaxiSYS Pro MS908P register, install and update

The Autel MaxiSYS Pro is the most comprehensive OBD2 tool for the professional technician who performs J-2534 reprogramming on a regular basis. The WIFI Autel MaxiSys Pro MS908P supports diagnostic and programming functions for multi-brand vehicle systems. Following are the software register, install and MaxiSys MS908P Update instruction.
9-1

How to install Autel MaxiSYS Pro MS908P software?

There are two Setup.exe program packages contained in the CD provided with the MaxiSys tool kit. The packages include the following applications:

1. PC Link – launches a Printing Services program which receives and
allows editing the files sent from the MaxiSys tablet for printing

2. Driver Program – setup driver program for the VCI device

3. Network Configuration Program and Update Agent – network configuration program and firmware update agent for the VCI device (for J2534 ECU programming device)

4. Update Agent – firmware update agent for the VCI device (for Bluetooth communication interface)

To install the Setup.exe program

1. Insert the CD into the CD-ROM of the computer. The driver installation wizard will load momentarily.
2. Click on Next on the welcome page.
3. Click the Change button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.
4. Click Install and the Setup.exe program will be installed onto the computer.

How to register Maxisys Pro MS908P pro programmer?

In order to get access to the Support platform and obtain update and other services from Autel, you are required to register the MaxiSys Diagnostic Device the first time you use it.

To register the diagnostic device
1. Visit the website: http://pro.auteltech.com.
2. On the Sign In page, input your account ID and other information to log in, if you already have an account.
3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side.
4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create Autel ID at the bottom to continue.
5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens.
6. Find out the device’s serial number and password from the About section of the Settings application on the MaxiSys Display Tablet.
7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.

How to Update Autel MaxiSYS Pro MS908P diagnostic scanner?

1) To update the software
Each car model software has different version. We provide free update online for One Year, after one year update fee is 995USD/year

2) To update the firmware
The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database. The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any updates that are found can be downloaded and installed on the device.

1. Power up the MaxiSys Display Tablet, and ensure that it is connected to a power source and with steady internet connection.
2. Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.
3. Check all available updates:  If you decide to update all the items, tap the Update All button. If you only want to update some individual items, tap the Update button on the right column of the specific item.
4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.
5. When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if there is one.

How to solve Autel MaxiSYS ms9o8 ms9o8p cannot work on cars after update

Autel Maxisys Pro Scan Tool are universal full system vehicle diagnostic tool with high quality made by autel company. This is the touch screen scanner, no need PC.

Update:

Autel Maxisys from OBD2TOOL is updated on official website. As this one is the PAD version support WIFI connection, you can directly operate the update process on the pad itself for update. Keep good connection for internet. Once internet is not good, update is not completely and fully, when you use it diagnose the car, then it cannot diagnose car smoothly. For this problem, you need to uninstall the software completely. Then reinstall the software again.

Here is the detailed steps:
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/59.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/60.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/61.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/62.jpg