DTS-Monaco and Vediamo, which better

DTS-monaco and Vediamo are added to MB Star C4 software since 12-2017.
20-1

but what is DTS-monaco and what is Vediamo? And what\s the difference?

Look here:

20-2

What is DTS-monaco:

DTS Monaco is universal Engineering Tester for Diagnostic and Control Functions of Vehicle

ECUs. The name Monaco is derived from Modular Analyzer for Vehicle Communication.

DTS Monaco comprehensively covers all tasks in the areas of engineering, testing and

preparation of manufacturing tests:

*   diagnostics
*   analysis
*   OBD
*   flash programming
*   measuring
*   parameterizing
*   residual bus simulation
*   OTX

MB SD C4 DTS Monaco is based on standards such as ODX, OTX and UDS

20-3

What is Vediamo:

Vediamo Software is used by the plant engineers to develop diagnosis and engineering software, which is now used by Xentry and DAS, is based on the Mercedes Benz super engineering version developed and delivered to the general customer service dealers’ use.

The use of MB super engineering version has no limitation in diagnosis / modification / programming function are open which cannot be through the VEDOC (the original application code changes with flow) can be free to increase or decrease the SA code, modify the objective, for example: the increase of vehicles equipped with SA500 electric folding mirrors, commonly known as the Xentry and DAS development mode: open data project version in 2010 after the release, increase the number of functional limitations. So we will meet the vehicle version is too new to be into the control unit in use, or are unable to do any special modifications to the control unit.

For example: W204/2122012 instrument to modify the area family configuration, or open other resource advantage function. Diagnosis / Mercedes super engineering version of the code with code / modification / programming database using the Xentry database, so the Mercedes Benz super engineering version is determined with the Xentry version, as long as the database is new and can be used in new models.

What’s the difference of DTS-monaco and Vediamo:

20-4
20-5

2018. 03 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate XENTRY:

Step 1: Double Check the icon name “starkey Center ” which on the computer desktop.
1
2

Record the computer’s Hardware ID
3

Step2: Double Check the folder”TOOLS” which on the computer desktop.
4

Run xentry developer V1.10

5

Step3:
As shown below: Enter the computer’s Hardware ID, Stat Date, Expiration Date. Calculate the license string.
8
7

Step4:Copy licenseto Start keys and save

8
9
10
11

Step5: Run xentry, as follows
12

We can supply Laptop + Software all ready for you.
We can supply FULL package C4 C5 SD + Laptop + Software for you.
We can carry out some C4 C5 SD repairs.
Remote installations available (if you supply the correct HDD size and install the correct Windows OS).
Teamviewer remote support available.

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate 2017.12 XENTRY:

Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop.

Step2: Select ” SDconnect”
1

Step3: Select ” Configure”.
2

Step 4: Select the icon as picture.
3

4

Step5:
5

Step 6 and 7 :
6

Step 8 , 9 and 10.

7

Step 11: Successful to Activation MB SD Connect C4 C5 MB Star Diagnostic Tools
8

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

(Solved)SD connect interface is Saying “please put in batteries”

Problem:

Hello MB star
I just recieved My tablet and it looks and work Very good .
But The sd connect interface is Saying “please put in batteries”
What type of batteries is it ?

Solution:

This problem same to :

MB Star C4 mux display: Favor inserir baterias(Please insert batteries)

Here you go :

1.Please prepare the following tools:

25-1

①— SDconnect multiplexer which need to input the batteries。

②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。

③— 1 unit 108M WIFI Card。

④— Plum screwdriver,Specification:T-20

2.Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.
25-2

2.2 Take out the rubber as below.
25-3

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

3.Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
25-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
25-5

3.3 Insert the batteries. Note the Battery polarity.
25-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
25-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

25-8

4.Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
25-9

4.2 Push it to make it totally connected.
25-10

4.3 Cover the rubber and fix the screws to finish all the work.

25-11

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!
25-12

Note 2:

pls check these picture, you can choose self-diagnosis your MB STAR ScannerSD connect c4

25-13 25-14

MB Star C3 092015 Xentry cannot work on W204

Mb Star C3 Star diagnostic system failed to work on Mercedes W204? Here is the customer solution. You are at your risk!

Problem:

I have DELL D630 with Xentry 09/2015 and MB Star C3 multiplexer. I have connected many cars (W202, W203, W210, W211, W245, etc) and there is no problem with connection – everything is working like a charm. Some days ago, I have bought W204 C280 from 2007. After I choose model, engine and transmission, and I go to diagnostic I see this:

“The diagnosis application is being started…”

27-1

and few seconds later this:

“Initialization of the multiplexer has failed”

27-2

My Mux is not compatible with W204? I searched few hours without success.

Customer solution:
W204 and X204 is the last Mercedes models which working without some special modifications.
You can try:

First try in toolkit.ini delete line skipcomports=all and set line usecomport=2 then you will see in SDconnect toolkit PartD on display after mux connection.

First save your original file for sure.

Try look into C:\Userdata\Config\Xentry\driver – slave.ini and set there com port which you have used for PartD.

Report:

There was no change because I didn’t restarted system. After restart work perfect.

Your solution work perfectly! Probem solved. Everything is working like a charm.

Obd2tool.com solution:

If you need to deal with newer Mercedes models, better go for MB SD Connect Compact 4 or Mercedes BENZ C5 diagnostic system.

Why should you buy SD connect C5/C4 with laptop

http://forobd2tool.com/wp-content/uploads/2017/07/1/21-2.jpg

Here list reasons why you should buy a Mercedes diagnostic tool with a laptop together:SD connect Mercedes C5

—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for mb star sd c4 purposes…

—Bought an older Dell D630 laptop with a serial port and plan on buying MB SD Star C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.

Mercedes Star C3 Diagnostic Tools / C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.

—If your ever in the market for a faster SDS laptop, the Dell 630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.

—the HDD that is pre-loaded with the software for sd connect c4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.

—Need to connect directly into a RS232 port without using an interface – this is why I went for the complete system with laptop.

—The software Xentry/ DAS is a bit slow on an old IBM so that it is worth paying a bit extra and getting a Dell D630.

—There is a very specific set of COM ports you must use for it to work. For example you need DAS to be looking at COMx within the VM session, then VMware needs to redirect that to COMx which is a ‘physical’ serial port on your machine.

—It’s probably because it has a real com port. Most laptops these days have just a USB port and things don’t always work right if you’re using a USB to RS-232 converter. You wouldn’t want to brick a component during an update if you’re using USB. The other option would be to get a C4 system, but then they cost more. I think there are a couple other systems out there like IBM that also have real com ports.

—The PART D mux(Benz star c3) is a serial ported mux—that’s the reason for the Dell and IBM older laptops.

—The PART W mux(SD connect C4) is and Ethernet/wifi connected system and that is the reason for use on other laptops—the issue is the operating system currently DAS Xentry only runs on XP.

—Plug and play!! It is more convenient for users because the software for C3/SD C4 diagnostic tool will be pre-installed before delivery.

SuperOBD SKP900 automotive key programmer

SuperOBD SKP-900 Key Programmer supports freely update. The current V3.4 verison adds Infiniti Q70L&M25 2013 smart key programming; VW LAVIDA pin code reading; Honda Fit, VEZEL (remote& smart)) 2014 smart key etc features. One of our customer reported that he came across error 2 when update SKP900 to V3.4.
skp 900 hand held obd2 auto key programmer
1.skp 900 key programmer version is V4.3 , support language: English. skp 900 update Update online
2.skp 900 programmer Support almost all vehicles in the world, It don’t need pincode when programming keys for many vehicles
3.skp-900 auto key programmer No tokens needed. You can program as many cars as you can
4.skp900 car key programmer Support TOYOTA G CHIP
5.super obd skp 900 can read pin code for many vehicles, only a few vehicles need to get pincode from other place

Main Features:
1. Support almost all vehicles in the world
2. Don’t need pincode when programming keys for many vehicles
3. Can read pin code for many vehicles, only a few vehicles need to get pincode from other place.
4. No ticket needed. You can program as many cars as you can.
5. Frequent monthly update. Update is free for 4 times, then pay for 1 times. Please see the update policy.
6. Low price to meet the economic crisis, cost-effective.

In comparison towards the Mercedes c4 multiplexer, Obd2tool.com MB Star C5 Xentry Connect has been improved a lot, in order to stay away from some accidental problems which ordinarily occur to Mercedes sds C4 scanner for the duration of use. Like the crashes brought about by the overheat within the interface of your detection tool. Aside from that, other principal capabilities are frequently the identical with C4.

Mercedes BENZ C5 Xentry Link analysis program, that is generated by France ACTIA Business plus equipped with Panasonic Xentry-Tab, can easily examination Serps / Transmission / ac /SRS/ABS/ anti-theft technique plus OBD-II technique. Benz C5 in Autonumen.com can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.