MB SD C4 Tourismo bus communication error (fixed)

I bought the MB SD C4+Dell D630 Laptop pre-installed bundle, when I test it have the problem SD Connect C4 cannot power on when connected with  Tourismo bus, I contacted there customer service at obd2toolcom, and here is the solution provided by their engineer.

I will explain my problem in detail:

” I have tried 2 different mb sd connect c4 on Tourismo buses and sd connect does not power on.In the meantime those MB SD Connect C4 works normally to any other MB Truck and car.also on Tourismo have check Mb Star C3 and works normally.”

You should check:

bus with OBD
pin 4 + 5
both must be connected and ground

In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.

“i’m getting an communication error when connecting xentry to a tourismo.”

Tourismo-bus-communication-error-1

A Communication error has occurred when access FPS system

Tourismo-bus-communication-error-2
Tourismo-bus-communication-error-3

Solution:

– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and Mercedes Star Diagnostic recognized FPS1/VIN code.

or

– enter the DAS ATEGO truck come and place manually and then it will work perfect

” Another problem is : “Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with MB SD C4 DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.”

I done the Access special settings , and it working perfect now!

032018 Mercedes Star Diagnostic Application 2018.03 Xentry Diagnostic Application Update

03/2018 Mercedes stardiagnosis Computer software Xentry Diagnostic Application update for MB SD C4, MB SD C5 perform with mercedes benz scn coding online account for Mercedes-Benz auto till 2018. 03/2018 Star Diagnosis computer software come with Vediamo and DTS Monaco MB engineering software option to choose. Below obd2tool.com share 03/2018 Xentry Diagnostic Application for Mercedes Benz Star Diagnostic Software detail as following.

03/2018 Mercedes Star diagnosis Xentry computer software mercedes diagnostic tool Xentry Software program

23-1

1 Mercedes Star Diagnostic Xentry Software 03/2018 Version Released
03/2018 Mercedes Star diagnosis Xentry application:

1. D-A-S / Xentry / HHT 2018.three the automatically Diagnosis Help System , Concise interface and simple operation with IB M high-quality personal computer can comprehend the quick and correct code reading plus the entire car or truck method testing.

2. W-I-S net 2018.two: Workshop Information and facts Program Supply the whole view with the wiring diagram inside a auto, component location diagram and upkeep process. What you do is to enter the chassis number, and after that you might get the manufacture data, engine configuration and the automobile model -all in detail

3. EPC.net 2018.2 : Electronic Parts Catalog

4. ST Finder 2016:Element place finder

5. STARUTILITIES : the movement management program and self-test

6. SDMEDIA 2015.1

7. PL71 V2017.1

03/2018 Mercedes Star diagnosis Xentry software Show:

23-2 23-3 23-4

4 Mercedes Star Diagnostic Xentry Software 03/2018 Version Released

STARFINDER2016 Mercedes Star Diagnostic Xentry Computer software 03/2018 Version Released

two Mercedes Star Diagnostic Xentry Computer software 03/2018 Version Released

Obd2tool.com also supply MB on-line coding account and SCN on line coding account login service function with 03/2018 Mercedes Star Diagnostic Computer software Xentry Diagnostic Computer software.

23-5

XENTRY3 Mercedes Star Diagnostic Xentry Software 03/2018 Version Released

Require obtain 03.2018 MB SD Connect C4 Computer software Mercedes Star Diagnostic Application MB Star Diagnosis Xentry Software program just speak to us freely.
Concentrate On OBD Tool Considering that 2008