MB STAR C4 C5 mb sd connect software has updated to 2019.07 with Super Engineering Software DTS monaco And Vediamo

Mb star c4 c5 Software list:

  1. DAS 2019.07: the automatically Diagnosis Assistance System
  2. Xentry 2019.07: New software released by Bennz Company after 04/2009 by diagnosis new cars.
  3. WIS net 2018.11:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

  1. EPC.net 2018.11:Electronic Parts Catalog
  2. ST Finder:Part Location Finder options: 2008 and 2016
  3. STARUTILITIES :the movement management system and self-test
  4. SD MEDIA 2014
  5. PL73

9.Engineer Software:DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming

10.HHT Software for old cars

11.Engineer version Vediamo updated to V5.01.01 ,Engineer version DTS updated to V8.14.016,Upgrade to the latest version of 2019 data

1) Fix the error that Mercedes-Benz DAS cannot directly call WIS

2) Join the DAS sedan smart offline programming

3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo

4) Join DAS special function password-free access PKW and SMART

5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline

6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit

7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function

8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly

9)Add DAS 212,207 prototyp model

 

MB SD Connect C4 C5 Feather:

1.Support Wireless

2.Xentry Software Version:2019.07

3.Hardware Verison:OS:2.3   CSD:2.11

4.Supported Multi-Language: Deutsch, English, Französisch, Italienisch, Spanien, Portugal, Finnland, Dänemark, Schweden and so on.

5.Including Super Engineer Software:DTS monaco V8.14.016 And Vediamo V5.01.01

6.Support Offline Programming

 

Basic programming set code function:

1.unit for off-line programming

2.a key to off-set code

3.W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4.222, 205 installing fragrance systems

5.2015, paragraph 212, changing traffic light permanently lit

6.212, 204, adding electric ear

7.222 205 HU5 traffic solution for DVD video

8.W164 closed recycling system

9.W205, retro atmosphere lamp

10.205, 222 adding electric ear electric trunk, the trunk kicking function

11.166, how to modify the gateway set up codes

12.166 meters finished degrees Fahrenheit to degrees Celsius

13.US standard maintenance mileage be set to the number of miles

14.164 disabled diesel particle filter regeneration system

15.166 canceled urea

16.205 added electric rear vision mirror

17.HU45 regional Chinese resolve lock

18.W204 W166 foldable rear-view mirror

19.change the 166 on board, display in Celsius

20.W212 disable ECO configurations

21.activate the HOLD function ABR2XT

22.open W22 looked up appears

23.the AMG sports package enabled W212

24.the air bag computer reset factory State W166

25.to increase the brightness of the color instrument cluster s W222

26.22.97g to install the steering wheel shift paddles

27.W221 AMG W216 dashboard style

28.airbag ECU unlock W204 212

29.disabled child seat recognition sensors W221

30.opening rear fog lamps as spare brake lights with W222

31.increasing engine power MED177

 

Mb star Software display:

1

2

10

11

 

12

 

3

4

5

7

8

 

9

 

7

How to test old Benz car before 1996 year with MB SD C4 C5 Star

Many customers contacted:

Why can’t MB SD C4 C5 test the old Benz car?Especially the old Mercedes Benz using the 38PIN diagnostic joint before 1996.

We checked and found that customers used the xentry software in MB STAR C4/MB STAR C5 to test old Mercedes Benz cars.It is wrong.Because the old Mercedes Benz cars before 1996 can only be tested by HTT software which is in DAS.And sometimes we also make a shortcut on the desktop of the computer.

xentry software

图片1

  HTT software

图片2

 

For example,In V2019.07 software of the MB STAR C4 / C5, HHT is made as a shortcut on your desktop.

Just click on the HHT icon on your computer desktop to open the software and test your old Mercedes Benz car(before 1996).

If you use V2019.07 software,you can lick and open the DTS icon on your computer desktop图片3.Then choose the old Benz car(before 1996) you want.HHT software will automatically pop up.

Why Choose MB Star Diagnostic 2019.5 Software

MB SD software has updated to 2019.5 version recently. This post will give you some information about 2019.5 software and tell you why we choose this product.

Why Choose MB Star Diagnostic 2019.5 Software?

*   2019.5 MB SD softwarecompatible with MB SD C4/MB SD C5 hardware.
*   2019.5 MB SD softwaresupportMercedes Benz Car & Truck Diagnostics till 2019.
*   2019.5 MB SDsoftware containsMB subscription, so it supports SCN Online Coding Function.
*   Mercedes engineering Vediamo & DTS Monaco software option means you can perform more professional functions.

Software Version: V2019.5

Compatible Hardware: MB Star SD C4, MB SD C5

Update: send HDD back to update, or purchase new HDD replacement

PC Requirements: Dell/ Lenovo/ Panasonic etc.

CPU: Intel Core 2 Duo Processor or equivalent, i5 CPU is much better, 2.2GHz or faster core speed

RAM: 4GB RAM minimum

Support languages: English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian; Spanish, Swedish, Turkish, Chinese.

Star Diagnosis Xentry Software Support car list:

Support for Mercedes vehicles, included: Cars, Buses, Trucks, Sprints, Smarts etc. till 2019

Mercedes Benz Star C3C4C5 Buying Guide

Mercedes benz star scanner is a very popular auto scanner in the market. However,Many customer are confused to choose when they want to buy one, because there is four version of mb star:Mercedes Benz Star diagnosis C3, benz star c4, MB star Compact C4 and super Mercedes BENZ C5.

So now,i will summarize their similarity and difference,hope it will helpful for customers to choose.

Similarity:

1.Benz star C3/C4 and MB star sd connect c4,Super MB Star c5 use same software.

2.For the hardware, Benz star C3/C4/C5 is same function in diagnosing.

Difference:

1.For the functions, MB star c3 and c4 are almost the same,C4 can do all the works what C3 does and it is the replacement of Compact C3.
Just benz star c4 size is small and weight is light,much convience and the anti‐interrupting ability is better.
One more thing, as customer feedback, the advantage of c3 is can do trucks best.

2.MB starC3, C4 just can support Mercedes Benz cars manufactured after year 2000. Super MB star c5,Benz SD Connect C4 can support all current and new coming MB vehicles.

3.Benz star c3,c4,SD connect C4 update by Harddisk.That means when customer want to update,they need to send back harddisk to supplier,after finish update,then send back to them again or just buy a new HDD.For the long international distance,it may need about 2 weeks can complete one time update,so it is very trouble and inconvience.

Under this suitation,Super mb benz star c5 is release, it is can update through super mb star official web directly, which will be much convience and time saving.

In addition,Super mb star C5 work with W204, W207, W212, 405, 451, 452 and 454. Besides the software c3 and c4 own,it added three more software: SD Media, Xentry and Smart TAN Code.

SD Media: Video and PDF lessons;
Xentry:New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

4.Now we turn to MB star SD connect C4 again.MB Star SD connect C4 not only support KL diagnosis and three lines CAN BUS diagnosis, but also support UDS diagnose protocol, Because it have UDS chips. Star C3,C4,c5 don’t have this chip, so they can not support UDS.

The most advantage of SD connect c4 is: It can connect to PC by wireless or Lan cable.So it will be much more convience than Benz star C3/C4/c5.

Besides, Professional Diagnostic Tools Mercedes Diagnostic Tool star SD connect C4 interface components used the military quickly inserted techniques that can support one million times plug, more stably;And all of the its core components adopt new original packaged chip, plus 24 hours fatigue test, to ensure its stable release.

So in all,each version have its advantage,just see which one is most suitable and interested you.

DTS-Monaco and Vediamo, which better

DTS-monaco and Vediamo are added to MB Star C4 software since 12-2017.
20-1

but what is DTS-monaco and what is Vediamo? And what\s the difference?

Look here:

20-2

What is DTS-monaco:

DTS Monaco is universal Engineering Tester for Diagnostic and Control Functions of Vehicle

ECUs. The name Monaco is derived from Modular Analyzer for Vehicle Communication.

DTS Monaco comprehensively covers all tasks in the areas of engineering, testing and

preparation of manufacturing tests:

*   diagnostics
*   analysis
*   OBD
*   flash programming
*   measuring
*   parameterizing
*   residual bus simulation
*   OTX

MB SD C4 DTS Monaco is based on standards such as ODX, OTX and UDS

20-3

What is Vediamo:

Vediamo Software is used by the plant engineers to develop diagnosis and engineering software, which is now used by Xentry and DAS, is based on the Mercedes Benz super engineering version developed and delivered to the general customer service dealers’ use.

The use of MB super engineering version has no limitation in diagnosis / modification / programming function are open which cannot be through the VEDOC (the original application code changes with flow) can be free to increase or decrease the SA code, modify the objective, for example: the increase of vehicles equipped with SA500 electric folding mirrors, commonly known as the Xentry and DAS development mode: open data project version in 2010 after the release, increase the number of functional limitations. So we will meet the vehicle version is too new to be into the control unit in use, or are unable to do any special modifications to the control unit.

For example: W204/2122012 instrument to modify the area family configuration, or open other resource advantage function. Diagnosis / Mercedes super engineering version of the code with code / modification / programming database using the Xentry database, so the Mercedes Benz super engineering version is determined with the Xentry version, as long as the database is new and can be used in new models.

What’s the difference of DTS-monaco and Vediamo:

20-4
20-5

2018. 03 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate XENTRY:

Step 1: Double Check the icon name “starkey Center ” which on the computer desktop.
1
2

Record the computer’s Hardware ID
3

Step2: Double Check the folder”TOOLS” which on the computer desktop.
4

Run xentry developer V1.10

5

Step3:
As shown below: Enter the computer’s Hardware ID, Stat Date, Expiration Date. Calculate the license string.
8
7

Step4:Copy licenseto Start keys and save

8
9
10
11

Step5: Run xentry, as follows
12

We can supply Laptop + Software all ready for you.
We can supply FULL package C4 C5 SD + Laptop + Software for you.
We can carry out some C4 C5 SD repairs.
Remote installations available (if you supply the correct HDD size and install the correct Windows OS).
Teamviewer remote support available.

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

SDconnect C4 connection problem- Das fault (1.1) -1.501.9878

SD Connect C4 fails to connect and comes up with the error message:

Das fault (1.1) -1.501.9878

The mux is connecting, with diagnosis computer both by lan cable or wifi ( passed and respond to all self tests), no lcd problems or blocked (!) . The fault comes when das try to initialize the mux green led blinks about 10 sec,and this fault comes no matter is from das standalone or launched from xentry.

Software & install:

xentry 12.2015 , das bin, blacklist fixed etc on a dell d630 appid 253 and ……

Solutions:

You must change IP address in windows.172.29.127.119:

Go into “Control Panel”, “Network Connection”, “Local Network Connection”> right click > properties > choose this one with TCP/IP, select this, chose properties, choose manually ip, and put this ip “172.29.127.119”, mask 255.255.0.0 (as you will get when type ip), rest of field, leave blank.

if it does not work

Try one more time make update of these 2 package.

6-1

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate 2017.12 XENTRY:

Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop.

Step2: Select ” SDconnect”
1

Step3: Select ” Configure”.
2

Step 4: Select the icon as picture.
3

4

Step5:
5

Step 6 and 7 :
6

Step 8 , 9 and 10.

7

Step 11: Successful to Activation MB SD Connect C4 C5 MB Star Diagnostic Tools
8

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

(Solved)SD connect interface is Saying “please put in batteries”

Problem:

Hello MB star
I just recieved My tablet and it looks and work Very good .
But The sd connect interface is Saying “please put in batteries”
What type of batteries is it ?

Solution:

This problem same to :

MB Star C4 mux display: Favor inserir baterias(Please insert batteries)

Here you go :

1.Please prepare the following tools:

25-1

①— SDconnect multiplexer which need to input the batteries。

②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。

③— 1 unit 108M WIFI Card。

④— Plum screwdriver,Specification:T-20

2.Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.
25-2

2.2 Take out the rubber as below.
25-3

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

3.Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
25-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
25-5

3.3 Insert the batteries. Note the Battery polarity.
25-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
25-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

25-8

4.Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
25-9

4.2 Push it to make it totally connected.
25-10

4.3 Cover the rubber and fix the screws to finish all the work.

25-11

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!
25-12

Note 2:

pls check these picture, you can choose self-diagnosis your MB STAR ScannerSD connect c4

25-13 25-14

V2017.9 Original Software Mercedes Benz MB SD C5 SD Connect Compact 5 Star Diagnosis with Engineer

Benz c5 from www.obd2tool.com can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.

C5 Star Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.

Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?

What are its distinguishing features?
Hardware, despite the similarity of many solutions with multiplexers SDConnect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer
The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used MB SD Connect C4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the Mercedes Benz Diagnostic Scanner diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Package List:
1pc x C5 Multiplexer (new C5 case)
1pc x OBDII 16PIN Cable
1pc x Lan Cable