SD Connect C4 change Mercedes time and date in cluster

Here is the instruction on how to change MB time/date with 2018.05 SD Connect C4 DAS/Xentry software.

Equipment:

I have bought Star Diagnose multiplexer with DAS/Xentry software on www.obd2tool.com

I think it’s cheaper than other places.

Follow the steps:
1. Install and activate the software. Software is pre-installed and activated if you get the MB SD Connect C4 multiplexer and Dell D630 laptopbundle package.
2. Connect MB SD C4 system with vehicle via OBD port
3. Run DAS software
4. Come to the main Control units group menu->F3
5. Select Information and communication option->F3
6. Select IC Instrument Cluster->F3
7. Select Diagnosis to plant specifications->F3

18-1

8.Select Control unit adaptations->F3

18-2

9.Select Control unit adaptations (Variant coding)->F3

18-3

10.Select Variantkodierung ->F3

18-4

11.Select Datumsanzeige Grundbildebene and turn date on “ein”

18-5

12.Select Menu 24 option and activate key dependency to “aktivieren” to active the status.
18-6

13.Reboot the cluster. The whole procedure is complete.

Just follow the steps above,you will have a wonderful experience with MB SD Connect Compact 4.

SD Connect C4 DCDI_eErrorCode=204 (204)

To solve MB SD Connect C4 Error Code 204, just put fresh 6 battery and do a csd firmware update. This is a common problem with cheap SD C4.

In detail…

The error message: DCDI_eErrorCode=204 (204)

15-0

Solved … was the 6 x AA battery into the SD connect

This is the how-to’s of…

Please prepare the following tools:

15-1

①— SD connect C4 multiplexer which need to input the batteries.

②— 6 units Ni-MH Rechargeable batteries, Size: AA, Voltage: 1.2V, Capacity: above 1700mA.

③— 1 unit 108M WIFI Card.

④— Plum screwdriver, Specification: T-20

Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.

15-2

2.2 Take out the rubber as below.

15-3

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

15-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

15-5
3.3 Insert the batteries. Note the Battery polarity.
15-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
15-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

15-8

Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.

15-9

4.2 Push it to make it totally connected.

15-10

4.3 Cover the rubber and fix the screws to finish all the work.

15-11

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!

Note 2:

pls check these picture,  you can choose self-diagnosis your Mercedes Star Diagnostic SD connect c4

15-12
15-13
15-14 15-4

Vediamo M Mode Variant Coding W212 7G

Some important tips of Mercedes Benz W212 7G M Mode Variant Coding using Vediamo.

Purpose:

W212 7G M Mode Variant Coding

You need:

Vediamo running with Sd connect C4

SCN coding database

Variant code:

Y2KY

BetaMar

I want to have M-mode in W212 E500 4matic 2010 model 212.090 SA801 – YOM 10/1, at the moment my variant code is Y2KX, does anyone help me to know the right code for M-mode ?

StarRacer

That’s interesting. I’ve got nearly the same car (W212 from 2009) and I’m also looking for the manual mode. My variant code is Y2KY.

Someone recommended to try three codings before and after the current one but I’m a bit hesitant with this.
The coding contains several properties of the car including 4Matic or RWD. In contrast to the RWD ones, the MB Star have a torque limitation to protect the gearbox etc. when starting with full throttle. Therefore, a genuine 4Matic variant code would be preferable.

I think in the 7G coding collection there was no W212 E500 with M-mode. The next “match” could be an S500 4Matic (221.086). From the thread mentioned its variant code is YE25. Not sure if this one has M-mode, though.

BetaMar

I want to confirm that in 212.090 with MY2010 SA801 M-mode work very well

with Y2KZ ?? Imidietly after coding there was error showed in KI display “presafe function is unavaiable” but after ignition off/on everything works!

For 212.090 MY2009 SA800 correct coding is Y2AR

StarRacer

SUCCESS! Now with working M-mode! Y2KZ also works for me. Same error as above after first start which went away with the 2nd start.

Test drive was successful. One drawback, however: The gear switching times in M are not better than in C or S. Some years ago, I read from an S211 (E500 M273 with 7g) which was given M-mode and the owner claimed significantly faster gear switching. He did it the official way: Changing VeDoc and MB Star C4 online SCN coding. Maybe there’s more to it than just the VGS variant coding.

Good luck
Related posts:

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate 2017.12 XENTRY:

Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop.

Step2: Select ” SDconnect”
1

Step3: Select ” Configure”.
2

Step 4: Select the icon as picture.
3

4

Step5:
5

Step 6 and 7 :
6

Step 8 , 9 and 10.

7

Step 11: Successful to Activation MB SD Connect C4 C5 MB Star Diagnostic Tools
8

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

2016.9 MB STAR XENTRY “a fault has occurred”solution

Obd2tool.com engineers fixed the MB Star diagnosis v2016.9 XENTRY error “a fault has occurred” already!

When you click on the setup button in  MB SD C4 Xentry 09.2016, the error message “a fault has occurred” pops up.

28-1

Just setup the date of your PC as 2016.09.05.

Then your Xentry will work like a charm.

How to setting WIFI OF MB SD Connect Compact 4

We know The MB SD Connect Compact 4 can connecting with Both Lan cable and WIFI, some customers might have question and problem about how to setting WIFI. OBD2TOOL share with you about WIFI setting on SD Connect C4.

How to Setting Benz diagnostic tool MB SD Connect Compact 4 Star Diagnosis WIFI?
Steps by steps instruction:
Click wireless network icon to select “View Available Wireless Network”.

Click “Refresh network list”.

Click “Change advanced settings”.

Select Wireless Network.
Tick on “Use Windows to configure my wireless network setting”.
Click Add.

Enter Network name..
Tick on “Connection even if this network is not broadcasting”
Cancel tick on “The key is provided for me automatically”.
Tick on “This is a computer-to-computer (ad hoc) network; wireless access points are not used”
Enter network key and confirm it. (network key: 26 a)

Go to Connection and tick on “correct when this internet is in range”, then click OK.

Enter the network key and click Connect.

Click the red circle in the menu bar.
Select Configuration and then click Yes.
Select MUX>> Register/Configure.

Select Encryption: WEP/Hex and enter the key (26 “a”s), then click Start.

Click OK.

Close Administration interface.
And you will see the network set just now is connected.

That’s all finished
If you have a MB SD Connect C4 wanna setting wifi or do not know how to setting WIFI, please can following with this instructions, hope it would help you.
If you wanna USE SOFTWARE DIRECTLY , we recommend you buy the SD C4 plus DELL D630 Laptop package.