Tag: MB Star C4 Diagnostic

SD Connect C4 Configuration Failure Solved by Firmware Reflash

If you failed to set up or configure Star diagnosis SD Connect C4, showing 00 error on main unit, you can follow firmware reflash steps below to solve the problem. Error on main unit. Unscrew and disassemble sd c4 unit This is correct wiring diagram. Right click on the icon

FAQ of MB SD C4 Functions, System Requirement and Activation

As a hot sale product in www.obd2tool.com, MB SD C4 leads a heated discuss and consult. And now, we have collected some frequent asked questions about MB SD Connect C4 and sort them in functions, computer system and activation. MB SD C4 Functions FAQ Q: Does SD Connect 4 support

MB STAR HHT Internal Fault Diagnosis Multiplexer Code 10766

Problem: I bought the Mercedes Star Diagnostic SD connect C4 diagnostic system. I have installed the XDOS 2015.12V DAS Xentry on Dell D630 laptop, but it gave me two errors: Error 1: HHT-WIN display error “Internal fault Diagnosis multiplexer Code:10766” Error 2: Fault (1.2) Initialization of diagnosis multiplexer failed. Possible reason:

Normal Star Diagnosis vs Developer Mode

Look here: Where exactly the differences between the normal Star Diagnosis and the Developer Version lie? Since these differences depend on the DVD version, you will get this nowhere reliable information. The Dev version contains features that are not always released for service and are therefore not available on the “normal”

SD Connect C4 change Mercedes time and date in cluster

Here is the instruction on how to change MB time/date with 2018.05 SD Connect C4 DAS/Xentry software. Equipment: I have bought Star Diagnose multiplexer with DAS/Xentry software on www.obd2tool.com I think it’s cheaper than other places. Follow the steps: 1. Install and activate the software. Software is pre-installed and activated if

SD Connect C4 DCDI_eErrorCode=204 (204)

To solve MB SD Connect C4 Error Code 204, just put fresh 6 battery and do a csd firmware update. This is a common problem with cheap SD C4. In detail… The error message: DCDI_eErrorCode=204 (204) Solved … was the 6 x AA battery into the SD connect This is the

Vediamo M Mode Variant Coding W212 7G

Some important tips of Mercedes Benz W212 7G M Mode Variant Coding using Vediamo. Purpose: W212 7G M Mode Variant Coding You need: Vediamo running with Sd connect C4 SCN coding database Variant code: Y2KY BetaMar I want to have M-mode in W212 E500 4matic 2010 model 212.090 SA801 –

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation Here is the steps to teach you how to activate 2017.12 XENTRY: Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop. Step2: Select ” SDconnect” Step3: Select ” Configure”. Step 4: Select the icon as

2016.9 MB STAR XENTRY “a fault has occurred”solution

Obd2tool.com engineers fixed the MB Star diagnosis v2016.9 XENTRY error “a fault has occurred” already! When you click on the setup button in  MB SD C4 Xentry 09.2016, the error message “a fault has occurred” pops up. Just setup the date of your PC as 2016.09.05. Then your Xentry will work

How to setting WIFI OF MB SD Connect Compact 4

We know The MB SD Connect Compact 4 can connecting with Both Lan cable and WIFI, some customers might have question and problem about how to setting WIFI. OBD2TOOL share with you about WIFI setting on SD Connect C4. How to Setting Benz diagnostic tool MB SD Connect Compact 4 Star Diagnosis