Tag Archives : KTAG V7.020


Ktag 7.020 review deleted DPF, EGR, DTC successfully

Finally received my Ktag package. It’s firmware KTAG Master version. and tested on three cars today today. See my Ktag fw 7.020: looks good Now, i’ll chip in some words of my experience. Three ECUs i’ve tested: ISUZU ECU Transtron 4JJ1 Mazda Denso ECU RF8P Hino 700 Denso Diesel ECU Attached […]

30-11

25-4

Ktag Kess V2 NO 12V (customer solution)

Hi all and thanks all for your responses. Here, i collect working solutions of Ktag or KESS V2 NO 12V. Hope it helps someone out. Part 1: Cannot get 12v of output from Kess V2 I use a AC power to connect to my kess V2 adapter. The seller gave it. […]


Best ECU programmers clone advice Kess, ktag, Fgtech, MPPS

Most comprehensive advice on what ECU programmers clone are verified working fine and good investment, tools advice including Kess v2 master fw v5.017/4.036, Ktag master V4.036/ V4.024 truck version, Fgtech Galletto V54, MPPS. Starts from the basic info comparison, advice which are really good according to users’ real test, ends […]

ecu tool-1

0

ECU Programming Tool KTAG & KESS V2 Explanation

As a professional mechanic, I have done a lot of research on ECU programmer, I was impressed on two products KTAG and KESS V2 from Obd2tool.com. Here I will Share my understanding of them. KTAG ECU Programming Tool KTAG V7.020 introduces another brand new novelty to Alientech world: J-Tag communication for […]


ECU Programming Tool KTAG & KESS V2 Explanation

As a professional mechanic, I have done a lot of research on Auto ECU Programmer, I was impressed on two products KTAG and KESS V2 from www.obd2tool.com. Here I will Share my understanding of them. K-TAG ECU Programming K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for […]

25-1

12-5

KESS V2 V2.08 FW4.036 read VAG Passat EDC17 IN Tricore

I just read the VAG EDC17 ecu with KESS V2 V5.017 Master ECU tuning kit, here is a little walk-through test. ECU: Passat 2.0TDI 2000 with BOSCH EDC17C46 Programming way: in Tricore Boot Mode Operating system: I loaded OK on Win 7 laptop Starting: Though ECU Scanner KESS V2 (FW 4.036) […]


Install ECM Titanium 1.61 with 26000 Drivers for KTAG Kess V2

Here are the tips for ECM Titanium 1.61 with 26000 drivers. The newest Car ECU Programmer allows you to interpret and edit the files stored inside the memory of the Engine Control Unit (ECU) accurately without any difficulty; and through the use of Driver which true “contents” pose for reading the […]

9-4

4-6

(Solved) Kess v2 error “External exception EEFFACE “

I replaced chip and reset tokens, then get connection error “External exception EEFFACE” as following picture shows. Try follow steps: 1.If you connect to internet with this clone tool,or make online update .The interface is destroy/broken 1.–Buy a new NPX chip with 60 tokens inside. Desolder the old NPX and […]


Ktag KTM100 V7.003 work as Original Trasdata

Is it possible to read edc17c64 with ktm100? Here is the test report of an Ktag expert. And this is the post with the most likes: “I made for my friend remap of skoda octavia 3 rs tdi. he bought ECU Scanners Ktag ktm100, the vendor send me dump, i […]