Lonsdor K518ISE SSANGYONG Vehicle List

Here comes the SSANGYONG immobilizer list of K518s key programming tool.

(Note: Models update till June 2019. Keep updating. Functions marked red below are under subscribed menu)
SSANG YONG\Select from type\Immobilizer\Type 1     Program key,Delete key,
SSANG YONG\Select from type\Remote\Type 1     Program remote,
SSANG YONG\Select from type\Immobilizer\Type 2     Program key,
SSANG YONG\Select from type\Immobilizer\Type 3     Program key,
SSANG YONG\Select from vehicle\Actyon\Petrol     Program key,
SSANG YONG\Select from vehicle\Actyon\Diesel     Program key,
SSANG YONG\Select from vehicle\Actyon\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Chairman\Petrol\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Chairman\Diesel     Program key,
SSANG YONG\Select from vehicle\Chairman\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Korando\Petrol     Program key,
SSANG YONG\Select from vehicle\Korando\Diesel     Program key,
SSANG YONG\Select from vehicle\Korando\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Kyron\Petrol     Program key,
SSANG YONG\Select from vehicle\Kyron\Diesel     Program key,
SSANG YONG\Select from vehicle\Kyron\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Musso\Petrol     Program key,
SSANG YONG\Select from vehicle\Musso\Diesel     Program key,
SSANG YONG\Select from vehicle\Musso\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Rexton\Petrol     Program key,
SSANG YONG\Select from vehicle\Rexton\Diesel     Program key,
SSANG YONG\Select from vehicle\Rexton\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Stavic Rodius\Petrol     Program key,
SSANG YONG\Select from vehicle\Stavic Rodius\Diesel     Program key,
SSANG YONG\Select from vehicle\Stavic Rodius\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Rodius\Petrol     Program key,
SSANG YONG\Select from vehicle\Rodius\Diesel\Type 1     Program key,
SSANG YONG\Select from vehicle\Rodius\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\Rextona…?\Petrol     Program key,
SSANG YONG\Select from vehicle\Rextona…?\Diesel     Program key,
SSANG YONG\Select from vehicle\Rextona…?\XDi system     Program key,Delete key,
SSANG YONG\Select from vehicle\New Rexton\Petrol     Program key,
SSANG YONG\Select from vehicle\New Rexton\Diesel     Program key,
SSANG YONG\Select from vehicle\New Rexton\XDi system     Program key,Delete key,
SSANG YONG\Select from type\Remote\Type 2     Program remote,
SSANG YONG\Select from vehicle\New Korando\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\ChairmanH\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Rodius-Stavic II\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Actyon sports(II)\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\XLV\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\XLV\Petrol\Remote     Program remote,
SSANG YONG\Select from vehicle\Musso(Rexton sports)\Diesel\Remote     Program remote,
SSANG YONG\Select from vehicle\Rexton(G4)\Petrol\Remote     Program remote,
SSANG YONG\Select from vehicle\New Korando\Petrol\Remote     Program remote,
SSANG YONG\Select from vehicle\Tivolan\Remote     Program remote,
SSANG YONG\Select from vehicle\XLV\Petrol\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Musso(Rexton sports)\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rexton(G4)\Petrol\Immobilizer     Program key,
SSANG YONG\Select from vehicle\New Korando\Petrol\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Tivolan\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rexton(G4)\Petrol\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Musso(Rexton sports)\Diesel\Smart key     Program smart key,
SSANG YONG\Select from type\Smart key\Type 1     Program smart key,
SSANG YONG\Select from type\Smart key\Type 2     Program smart key,
SSANG YONG\Select from type\Immobilizer\Type 4     Program key,
SSANG YONG\Select from type\Remote\Type 3     Program remote,
SSANG YONG\Select from vehicle\New Korando\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\New Korando\Diesel\Remote     Program remote,
SSANG YONG\Select from vehicle\New Korando\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Rexton W\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Rexton W\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rodius\Diesel\Type 2\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rodius-Stavic II\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rodius-Stavic II\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Actyon sports(II)\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Actyon sports(II)\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\XLV\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\XLV\Diesel\Remote     Program remote,
SSANG YONG\Select from vehicle\XLV\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Rexton(G4)\Diesel\Immobilizer     Program key,
SSANG YONG\Select from vehicle\Rexton(G4)\Diesel\Remote     Program remote,
SSANG YONG\Select from vehicle\Rexton(G4)\Diesel\Smart key     Program smart key,
SSANG YONG\Select from vehicle\Tivolan\Smart key     Program smart key,

Lonsdor K518ISE review on SSANGYONG

Lonsdor K518ISE Program SsangYong Kyron 2014 Remote Key

Lonsdor K518 Program Isuzu D-Max Remote Key

Guide to program remote key on a Isuzu D-Max 4×4 with LLonsdor K518 key programmer via OBD.

Lonsdor K518ISE Isuzu Vehicle List
ISUZU
Series     Origin     Year     Fuel Type     Function
D-MAX     Other     Other     Other     Immobiliser System 1
MU-7     Other     Other     Other     Immobiliser System 1
D-MAX     Other     Other     Other     Immobiliser System 3
MU-X     Other     Other     Other     Immobiliser System 3

Procedure:

Connect Lonsdor K518ISE host with vehicle via OBD diagnostic socket

Select Immobilizer->ISUZU->D-MAX->Program remote

lonsdor-k518-isuzu-dmax-1

Turn ignition switch to ON position

lonsdor-k518-isuzu-dmax-2

Maximum 5 keys can be programmed

lonsdor-k518-isuzu-dmax-3

Close all doors and open the door on driver side

lonsdor-k518-isuzu-dmax-4

Lonsdor K518 identifies current remote key number: 0

lonsdor-k518-isuzu-dmax-5

Press the Unlock button of the remote key for 5 times until the indicator flashes

lonsdor-k518-isuzu-dmax-6

Programming complete, press YES to program next key

lonsdor-k518-isuzu-dmax-7

Repeat and program next remote

lonsdor-k518-isuzu-dmax-8

lonsdor-k518-isuzu-dmax-9

Program success.

K518 displayed 1 remote has been programmed.

Press YES to program other key or NO to go back.

Test the remote key.

Done!

Lonsdor K518 Read Pin and Program Key on Opel Astra H 2005

Car model: Opel Astra H year 2005
Key type: remote key with PCF7941 chip
Device to program: read pin code and add a key by  the Lonsdor K518ISE key programmer.

Procedure:
Step 1: Read Pin Code
Try to read pin code under Opel menu or detail model menu
Under detail model menu:
Immobilizer->Opel->select from vehicle->Astra->Astra H->Immobilizer

lonsdor-k518ise-2005-opel-astra-1

lonsdor-k518ise-2005-opel-astra-2

lonsdor-k518ise-2005-opel-astra-3
lonsdor-k518ise-2005-opel-astra-4
Try Read Pin Code and Read PIN Code (type 6), both failed to read PIN
Then go back to Opel menu->Read Pin Code

lonsdor-k518ise-2005-opel-astra-5
Try different types

lonsdor-k518ise-2005-opel-astra-6

Read pin code success under Type 3

lonsdor-k518ise-2005-opel-astra-7

Step 2: Program remote key

lonsdor-k518ise-2005-opel-astra-8

Select Program Key
Verify VIN code

lonsdor-k518ise-2005-opel-astra-9

Insert new key to be programmed and turn on ignition switch

lonsdor-k518ise-2005-opel-astra-10

Lonsdor K518 asks enter 4-digit pin to continue

lonsdor-k518ise-2005-opel-astra-11

Program complete.
Start vehicle and test remote control.
Done.

Lonsdor K518ISE Mercedes Benz & Smart Vehicle List

Here comes the Mercedes Benz and Smart immobilizer key programming list of Lonsdor K518ISE/K518S key programmer.

(Note: Models update till June 2019. Keep updating. Functions marked red below are under subscribed menu)

Benz IMMO Vehicle List
MERCEDES-BENZ\Key system\System 1     Disable key,
MERCEDES-BENZ\Tail box controlling\C series\204     Trunk control,
MERCEDES-BENZ\Tail box controlling\CLK series\204     Trunk control,
MERCEDES-BENZ\Tail box controlling\E series\212     Trunk control,
MERCEDES-BENZ\Tail box controlling\S series\221     Trunk control,
Mercedes-Benz\Remote\163-ML Class     Remote,Reset ECU,
Mercedes-Benz\Tail box controlling\E series\213.148 E300 SEDAN(2017)     Trunk control,

Smart IMMO vehicle list
SMART\BR451\Immobilizer     Program key,
SMART\BR450\-2002\Immobilizer     Program key,
SMART\BR453\Immobilizer     Read PIN code,Program key,Recover configured data,Test(disable),
SMART\BR452\2003-2006\Immobilizer     Program key,Read key count,
SMART\BR454\2004-2006\Immobilizer     Program key,
SMART\BR450\2002-\Immobilizer     Program key,Read key count,

Smart Odometer correction vehicle list
SMART\BR451\Odometer adjustment     Odometer adjustment,

Lonsdor K518S Add New Key for Honda CR-V 2015

Here OBD2TOOL share you the test report on Lonsdor K518S program new key for Honda CR-V 2015.In this case it is a adding key testing,you need to working key.

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-1

Procedures:

Connect Lonsdor K518S to Honda CR-V obd port,then enter menu to select “Immobilization”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-2

Select “Honda”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-3 Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-4

Select from vehicle

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-4)

Select “CR-V”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-5

Select “2012-”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-6

Immobilizer

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-7

Now we need to check which IMMO type can do this vehicle model,select “Search IMMO type”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-8

Immo type

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-9

Now switch ignition ON

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-10

Here Lonsdor K518 show you need to use “immobilizer system 2”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-11

Back menu to select “IMMO2”

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-12

Add one key

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-13

And insert registered key and switch ignition

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-14

Switch ignition off in 15 seconds

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-15

Use an original key within 17 seconds to switch ignition on

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-16

Switch ignition off in 17 seconds
Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-17

Switch ignition on with a new key in 20 seconds

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-18

Switch ignition off in 17 seconds

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-19

Switch ignition on within 20 seconds without replace key
Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-20

Switch ignition off in 15 seconds
Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-21

Switch ignition on

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-22

It will prompt you “Is immobiliser light off?”Press “OK” to continue

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-23

Switch ignition off in 15 seconds

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-24

Switch ignition on

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-25

Now key programming successfully

Keys programmed:3

Check all keys to ensure each can start car engine

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-26

Programming complete

Lonsdor-K518S-Add-New-Key-for-Honda-CR-V-2015-27

Done!

Lonsdor K518ISE Adds BMW CAS3++Smart Keys Success

Tested successfully! Lonsdor K518S Key Programmer is able to add a smart key to BMW CAS3++.

Here’s the programming instruction in detail (with images)…

Lonsdor K518ise: Immobilizer – BMW

lonsdor-k518ise-bmw-cas3+-obd-1

Select from type: CAS2/CAS3 series

lonsdor-k518ise-bmw-cas3+-obd-2

lonsdor-k518ise-bmw-cas3+-obd-3

Program key

lonsdor-k518ise-bmw-cas3+-obd-4

Will start to make a dealer key

this can add one key (select blank position)
this can replace the original key (choose non-blank position)
this can generate a key via OBD or K518 slot

lonsdor-k518ise-bmw-cas3+-obd-5

Pls press the Start button once

lonsdor-k518ise-bmw-cas3+-obd-6

CAS part number: *******

CAS type: CAS++

For encrypted CAS. pls use an original key to switch ignition on

Pls back up eeprom data before any operation

Pls contact the dealer when key generation failed

lonsdor-k518ise-bmw-cas3+-obd-7

Lonsdor read out frame number, cas part number, diagnostic code, key tooth code and remote key frequency and ignition
lonsdor-k518ise-bmw-cas3+-obd-8

Reading ram, for about 1 min…
lonsdor-k518ise-bmw-cas3+-obd-9

Remove the key from the ignition switch

For a smart key, take it outside the car

Ok to continue
lonsdor-k518ise-bmw-cas3+-obd-10

Safety checking…

lonsdor-k518ise-bmw-cas3+-obd-11
Reading key information…
lonsdor-k518ise-bmw-cas3+-obd-12

Current CAS key position info: Key 3
lonsdor-k518ise-bmw-cas3+-obd-13

Note: If the key is an original key, pls pre-pro-process it first.

If the key has been programmed but failed, pls do key unlocking and CAS key data restoring first
lonsdor-k518ise-bmw-cas3+-obd-14

It’s a remote key
lonsdor-k518ise-bmw-cas3+-obd-15

Pull K518 key slot to the right and insert the key to program (to identify id the key is legal and to pre-process
lonsdor-k518ise-bmw-cas3+-obd-16

Current key is legal

Generating can be continued
lonsdor-k518ise-bmw-cas3+-obd-17

Pls insert the key for programming into the car slot
lonsdor-k518ise-bmw-cas3+-obd-18
lonsdor-k518ise-bmw-cas3+-obd-19

Writing key data…
lonsdor-k518ise-bmw-cas3+-obd-20

If for a remote of smart key, pls complete following steps:

take away the key from theition switch
re-insert the key into the ignition switch
press the start button

lonsdor-k518ise-bmw-cas3+-obd-21
lonsdor-k518ise-bmw-cas3+-obd-22

If the vehicle cannot be started, or the direction lock shows on the dashboard, pls synch ELV and DME accordingly

Writing key data – completed!
lonsdor-k518ise-bmw-cas3+-obd-21

Job’s done!
lonsdor-k518ise-bmw-cas3+-obd-23
Lonsdor K518 successfully added a CAS3++ smart key!

Lonsdor K518ISE Adds Volvo XC60 2009 Smart Key Success

New feedback: Volvo XC60 2009 add key with Lonsdor K518ISE success. Before adding key All keys was deleted and after programming active stays only two keys that was programmed on This time. So other keys , stays inactive.

It takes 2 hours with no hurry.

Read CEM data with Kprog2

Program key with Lonsdor

Credit to Arturs Bedre.

lonsdor-k518ise-volvo-XC60-2009-add-key-1 lonsdor-k518ise-volvo-XC60-2009-add-key-2 lonsdor-k518ise-volvo-XC60-2009-add-key-3 lonsdor-k518ise-volvo-XC60-2009-add-key-4
lonsdor-k518ise-volvo-XC60-2009-add-key-5 lonsdor-k518ise-volvo-XC60-2009-add-key-6 lonsdor-k518ise-volvo-XC60-2009-add-key-8 lonsdor-k518ise-volvo-XC60-2009-add-key-9 lonsdor-k518ise-volvo-XC60-2009-add-key-10

Lonsdor K518 Program Renault Clio IV All Keys Lost Step-by-Step

Renault Clio 4 all keys lost key card programming is verified can be done by Lonsdor K518ISE/K518S key programming under subscribed menu.

Read pin code – ok

Immobilizer programming- ok

Remote programming-ok

Note:

Require to dismantle the smart key module HFM to read D-FLASH D70F3633 data by programmer (VVDI Prog, Orange5 etc) then copy bin file to K518 “customfile” folder.

HFM_X98_

In K518, select Renault->Select from vehicle->Clio->Clio IV->2012 up->All key lost

lonsdor-k518-renault-clio-iv-1

lonsdor-k518-renault-clio-iv-2 lonsdor-k518-renault-clio-iv-3 lonsdor-k518-renault-clio-iv-4

Follow Lonsdor prompts to read HFM data and paste bin file to K518 customfile folder.
lonsdor-k518-renault-clio-iv-5 lonsdor-k518-renault-clio-iv-6

Select D-Flash D70F3633 bin file
lonsdor-k518-renault-clio-iv-7

Reading file data

lonsdor-k518-renault-clio-iv-8

Read data successfully

lonsdor-k518-renault-clio-iv-9

Read VIN and confirm

lonsdor-k518-renault-clio-iv-10
Lonsdor K518 Read Pin Code success

lonsdor-k518-renault-clio-iv-11

lonsdor-k518-renault-clio-iv-12
Insert key card into slot and turn on ignition

lonsdor-k518-renault-clio-iv-13

Switch ignition off and then turn on again

lonsdor-k518-renault-clio-iv-14

Program completed.  Continue to program next key card or quit

lonsdor-k518-renault-clio-iv-15
Test the new key, start engine

lonsdor-k518-renault-clio-iv-16

Test the remote control.

Done.

Lonsdor K518ISE Renault Dacia Vehicle List (Keep Updating )

Here comes the full Renault vehicle list of Lonsdor K518ISE/K518S key programmer.

(Note: Models update till June 2019. Keep updating. Functions marked red below are under subscribed menu)

RENAULT\Select from type\Smart key\IMMO2        Program smart key,Collision recovery,
RENAULT\Select from type\Smart key\IMMO1       Program smart key,Collision recovery,
RENAULT\Select from vehicle\Fluence\2008 -\     Smart key Immobilization,
RENAULT\Select from vehicle\Clio\1997-1999     Set IMMO unit,Initialize new immobilizer,
RENAULT\Select from vehicle\Clio\2000-2008 VIN with VF1*B       Immobilization,
RENAULT\Select from vehicle\Clio\2006-2012 VIN with VF1*R\With smart       Program smart key,
RENAULT\Select from vehicle\Clio\2006-2012 VIN with VF1*R\Without smart       Immobilization,
RENAULT\Select from vehicle\Espace\2002- VIN with VF1*K\2 buttons       Smart key,
RENAULT\Select from vehicle\Espace\2002- VIN with VF1*K\3 buttons       Smart key,
RENAULT\Select from vehicle\Kangoo\1999-2002\Type 1       Set IMMO unit,
RENAULT\Select from vehicle\Kangoo\1999-2002\Type 2       Set IMMO unit,Initialize new immobilizer,
RENAULT\Select from vehicle\Kangoo\2003-2008 VIN with VF1*C       Immobilization,
RENAULT\Select from vehicle\Koleos\2008-2010 VIN with VF1*Y       Smart key,
RENAULT\Select from vehicle\Laguna\- 2007/2007 VIN with VF1*G\2 buttons       Smart key,
RENAULT\Select from vehicle\Laguna\- 2007/2007 VIN with VF1*G\3 buttons       Smart key,
RENAULT\Select from vehicle\Laguna\2007-2011 VIN with VF1*T       Smart key,
RENAULT\Select from vehicle\Master\-2003       Set IMMO unit,Initialize new immobilizer,
RENAULT\Select from vehicle\Master\2003-2010 VIN(VF1*D)       Immobilization,
RENAULT\Select from vehicle\Maxity       Read BCM,Program remote,Delete remote,
RENAULT\Select from vehicle\Megane\2002-2008 VIN with VF1*M       Smart key,
RENAULT\Select from vehicle\Megane\02-08(93YLM)       Smart key,
RENAULT\Select from vehicle\Megane\2008 –       Immobilization,
RENAULT\Select from vehicle\Scenic\2002-2006, VIN with VF1*M       Smart key,
RENAULT\Select from vehicle\Scenic\2006-2009, VIN with VF1*M       Smart key,
RENAULT\Select from vehicle\Scenic\2008-2011       Immobilization,
RENAULT\Select from vehicle\Modus\2004-2012 VIN with VF1*P\Without smart       Immobilization,
RENAULT\Select from vehicle\Modus\2004-2012 VIN with VF1*P\With smart       Smart key,Program remote,Delete remote,
RENAULT\Select from vehicle\Safrane\2008- VIN with VF1AB\Smart key       Smart key,
RENAULT\Select from vehicle\Scala\2011-       Read BCM,Immobilization,Program remote,Delete remote,
RENAULT\Select from vehicle\Trafic\2002- VIN with VF1*L       Immobilization,
RENAULT\Select from vehicle\Trafic\-2002       Set IMMO unit,Initialize new immobilizer,
RENAULT\Select from vehicle\Twingo\-2007 VIN with VF1*O\Type 1       Set IMMO unit,
RENAULT\Select from vehicle\Twingo\-2007 VIN with VF1*O\Type 2       Set IMMO unit,Initialize new immobilizer,
RENAULT\Select from vehicle\Twingo\2007- VIN with VF1*N       Immobilization,
RENAULT\Select from vehicle\Velsatis\2002-2010 VIN with VF1*J\2 buttons       Smart key,
RENAULT\Select from vehicle\Velsatis\2002-2010 VIN with VF1*J\3 buttons       Smart key,
RENAULT\Select from vehicle\Wind\2010- VIN with VF1*N       Immobilization,
RENAULT\Select from vehicle\Safrane\(KNMG4) 2009-\Ignition switch       Read BCM,Immobilization,Program remote,Delete remote,
RENAULT\Select from vehicle\Koleos\2010-2016 VIN with VF1*Y       Program smart key,Collision recovery,
RENAULT\Select from vehicle\Latitude       Immobilization,
RENAULT\Select from vehicle\Scenic\1999-2002       Read PIN code,Program key,
RENAULT\Select from vehicle\Scenic\-2008       Program key,
RENAULT\Select from vehicle\Twingo\Twingo I Ph3.\2001-2006       Add key,
RENAULT\Select from vehicle\Symbol\Symbol.\Type 1       Add key,
RENAULT\Select from vehicle\Thalia\Thalia.\Type 1       Add key,
RENAULT\Select from vehicle\Trafic\Trafic II Ph2.       Add key,
RENAULT\Select from vehicle\Master\Master.        Add key,
RENAULT\Select from vehicle\Primastar\Primastar.       Add key,
RENAULT\Select from vehicle\Clio\Clio II Ph2.       Add key,
RENAULT\Select from vehicle\Kangoo\Kangoo I.       Add key,
RENAULT\Select from vehicle\Symbol\Symbol.\Type 2       Program key,
RENAULT\Select from vehicle\Thalia\Thalia.\Type 2       Program key,
RENAULT\Select from vehicle\Dacia\Duster\2010-2012       Program key,
RENAULT\Select from vehicle\Laguna\Laguna II.       Add key,
RENAULT\Select from vehicle\Espace\Espace IV.       Add key,
RENAULT\Select from vehicle\Velsatis\-2005.       Add key,
RENAULT\Select from vehicle\Laguna\Laguna II Ph2.       Add key,
RENAULT\Select from vehicle\Espace\Espace IV Ph2.       Add key,
RENAULT\Select from vehicle\Velsatis\2005-.       Add key,
RENAULT\Select from vehicle\Clio\CLIO III.\Without smart       Add key,
RENAULT\Select from vehicle\Modus\Modus.\Without smart       Add key,
RENAULT\Select from vehicle\Clio\CLIO III.\With smart       Add key,
RENAULT\Select from vehicle\Trafic\Trafic II Ph3.\2010-2014       Add key,Revise VIN code,Clear fault code,
RENAULT\Select from vehicle\Master\Master III\2010-2015       Add key,Revise VIN code,Clear fault code,
RENAULT\Select from vehicle\Kangoo\Kangoo II.\2007-2012       Add key,
RENAULT\Select from vehicle\Twingo\Twingo II.\2007-2014       Add key,
RENAULT\Select from vehicle\Wind\2010-2013.       Add key,
RENAULT\Select from vehicle\Laguna\Laguna III.\2007-2015       Add key,
RENAULT\Select from vehicle\Megane\Megane III.\2009-2015       Add key,
RENAULT\Select from vehicle\Fluence\2009-2015.       Add key,
RENAULT\Select from vehicle\Koleos\2008 -.       Add key,
RENAULT\Select from type\All\Type 0       Add key,
RENAULT\Select from type\All\Type 1       Add key,
RENAULT\Select from type\All\Type 2       Program key,
RENAULT\Select from type\All\Type 3       Add key,
RENAULT\Select from type\All\Type 4       Add key,
RENAULT\Select from type\All\Type 5       Add key,
RENAULT\Select from type\All\Type 6       Add key,
RENAULT\Select from type\All\Type 7       Add key,Revise VIN code,Clear fault code,
RENAULT\Select from type\All\Type 8       Add key,
RENAULT\Select from type\All\Type 9       Program key,
RENAULT\Select from type\All\Type A       Add key,
RENAULT\Select from vehicle\Scenic\Scenic       Add key,
RENAULT\Select from type\All\Type B       Read PIN code,Program key,Recover backup data,
RENAULT\Select from vehicle\Trafic\Trafic III (4A)\2014-\System 1       Read PIN code,Program key,Recover backup data,
RENAULT\Select from vehicle\Clio\Clio IV.\2012-       Add key,Recover data,All key lost,
RENAULT\Select from vehicle\Captur       Add key,Recover data,All key lost,
RENAULT\Select from vehicle\Symbol\2013-2018       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Avantime\2001-2003       Add key,
RENAULT\Select from vehicle\Dacia\Logan\2013-       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Trafic\Trafic III (4A)\2014-\System 2       Program key,
RENAULT\Select from vehicle\Twingo\Twingo III.       Read PIN code,Recover backup data,Program key,
RENAULT\Select from vehicle\Kangoo\Kangoo II.\2007-2012(VFI*W)       Add key,Revise VIN code,Clear fault code,
RENAULT\Select from vehicle\Espace\2015-\Smart key       Program smart key,Make dealer key,
RENAULT\Select from vehicle\Megane\Megane CC.\-2008       Program key,
RENAULT\Select from vehicle\Espace\2015-\Mechanical key       Program key,Make dealer key,
RENAULT\Select from vehicle\Megane\Megane a…£.\2015-\Smart key       Program smart key,Make dealer key,
RENAULT\Select from vehicle\Megane\Megane a…£.\2015-\Mechanical key       Program key,Make dealer key,
RENAULT\Select from vehicle\Scenic\Scenic a…£.\2015-\Mechanical key       Program key,Make dealer key,
RENAULT\Select from vehicle\Scenic\Scenic a…£.\2015-\Smart key       Program smart key,Make dealer key,
RENAULT\Select from vehicle\Dacia\Dokker\2012-       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Dacia\Duster\2013-       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Dacia\Solenza       Add key,
RENAULT\Select from vehicle\Dacia\Lodgy\2013-       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Dacia\Sandero stepway\2006-2011       Add key,
RENAULT\Select from vehicle\Dacia\Sandero\2007-2012       Add key,
RENAULT\Select from vehicle\Dacia\LOGAN\2004-2012       Add key,
RENAULT\Select from vehicle\Dacia\Sandero\2013-       Program key,Read PIN code,Read key count,
RENAULT\Select from vehicle\Dacia\LOGAN(MA1LS)\2006-2009       Add key,
RENAULT\Select from vehicle\Fluence\2008 -\Mechanical key       Program key,

DACIA Vehicle List
DACIA\Dokker\2012-       Program key,Read PIN code,Read key count,
DACIA\Dokker\2012-       Program key,Read PIN code,Read key count,
DACIA\Duster\2010-2011       Add key,
DACIA\Logan\2004-2011       Add key,
DACIA\Sandero\2007-2011       Add key,
DACIA\Sandero stepway\2006-2012       Add key,
DACIA\Lodgy\2013-       Program key,Read PIN code,Read key count,
DACIA\Logan\2013-       Program key,Read PIN code,Read key count,
DACIA\Sandero\2013-       Program key,Read PIN code,Read key count,
DACIA\Duster\2013-       Program key,Read PIN code,Read key count,

Help file for Volvo-S60 smart key-Full Keyless with Lonsdor K518ISE!

Function

  1. Add smart key: to add a smart key or program on all key lost;
  2. Delete smart key: delete the already programmed smart key;
  3. Read the CEM security data: dismantle & read CEM to backup security data (this is a must before programming);
  4. Read the KVM security data: dismantle & read KVM to backup security data (this is a must before programming);
  5. Key identification and unlocking: to detect whether the key is a new unused one. If the remote control is invalid after programming (on condition that the battery has been installed and the remote frequency is correct), try to import the CEM safety data to unlock the key and program again after unlocking.

Note: it can only unlock the CEM safety data of the vehicle or the corresponding vehicle

  1. Module identification: identify the body CEM / KVM module status, please do this before all the operation, this function can ensure the module status, and distinguish between full-keyless / half-keyless. In addition, when the safety data backup is completed, and the module has been installed where it should be, please perform “module identification” again just in case and then proceed programming.

 

Note:

  1. When programming Volvo 6-button keys, please be sure to dismantle&read the CEM and KVM first, as to their location and how to read, please refer to the “Operation”.
  2. First time to use the adapter, you need to bind it with K518ISE key programmer. Go to the K518ISE home page and choose “Settings -> Bind adapter”, following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.
  3. For the 6-button key, you need to dismantle & read the CEM in the co-pilot storage box,as well as the KVM in the right trunk to backup security data.
  4. Connection between K518ISE host, adapter and RN-01 board :

1

  1. Read Volvo CEM please use RN-01 board:

2

6.Connection between K518ISE host, adapter and FS-01 board:

3

7.Read Volvo KVM please use FS-01 board:

4

 

Operation:

Before all operation, please connect the car OBD to “Module identification”, which can detect the module (CEM / KVM) status, distinguish if the car is full key-less or half-key-less.

Test status results: (1) Installed. (Indicating that the corresponding module status is normal)

(2) No installation or communication failure. (That the car does not have the corresponding module, or the module status is abnormal)

After the backup of the safety data is completed, install back all the modules accordingly. Please do “Module identification” again, check to ensure that the module is well installed and in normal status. And then do programming operation.

Read CEM security data:

  1. Volvo’s CEM are located under the co-pilot airbag on the left, the removal of the co-pilot glove;

Volvo’s CEM is basically located behind the storage box which is in front of the co-pilot seat

5

CEM boxes may have the same appearance, but the back of the circuit wire location is different, can be called type A and B .

6

Type A: open the lid, pay attention to the black columns in the blue circle on the back of the circuit board, those are four positioning points, stably match them respectively with the white columns on RN-01 board.

Note: The circuit board is coated with insulating glue, it is required to use the washing plate water to wash it off the blue area of the insulation coating in the contact point (solder joint) , or power can not go through, if the needle of RN-01 board is broken, it will need to wire in the corresponding locations.

(First time to use the adapter, please bind it with K518ISE host, please refer to”Function”)

7

8

Type B: Its circuit is different from that of type B, it requires to wire to read immodata, please refer to below wire instruction:

9

10

Note: Connect power to read the data, it is required to separate RN-01 board to the motherboard to prevent conduction; welding line should not exceed 15cm.

11

 

Read KVM security data:

1.Volvo’s KVM modules are located in the rear of the car rear, right rear wheel position (16 S60L recommended from the right rear door to the wheel direction);

12

13

2.Open the module cover, you must first use the washing plate to clean the blue area of the insulation coating,or power can not go through, please bind it with K518ISE host, please refer to”Function”)

14

3.The points in the red area are the 8 pin insertion points on the FS-01 board:

15

16

 

Notice

Part of the Volvo KVM data read failure is because the chip model is different, then please:

① use the programmer to read out the data (.bin file);

② Please contact the after-sales (phone / QQ: 4009669130) and send EEPROM data to them, then the engineers will transfer the data into a special file;

③ Then please connect K518ISE to the computer, put the special file into the”file —> feature_35”folder;

④ Please continue programming to select the KVM data from the process.

 

Read KVM data with programmer:

17

 

Attention

  1. When programming Volvo 6-button key, be sure to dismantle & read the CEM and KVM, as to their location and how to read them, please refer to the “Operation” or “Reference”.
  2. It is required to bind the adapter when using it for the first time, you need to bind it with K518ISE. Go to the device home page and choose “Settings -> Bind adapter”, following the direction to finish binding. One K518ISE host can bind up to 5 adapters, and the bound adapter can not be bound to other K518ISE hosts. Once bound, no need to bind again.
  3. For 5-button key, you only need to dismantle&read the CEM in co-pilot storage box to backup security data, for 6-button key, you need to dismantle&read the CEM in co-pilot storage box, as well as the KVM in the right trunk to backup security data.
  4. For 6-button key, you need to first insert the key into the key slot and then operate according to the directions.
  5. Check if the card is locked when it can’t be inhaled in the key slot, locked key can’t be inhaled, a new card generally will not be locked.
  6. When install battery to Volvo models, please pay attention that the two batteries are overlapped, separated by a white paper in between, do not just replace the above one.

Disassemble is also very simple, remove the metal key, in the place where the key lies, please find a little knife with not too sharp blade, gently open it from the gap.