Ksuite 3.37 Download Free for KtagKess V2 Master

Free download Ksuite latest version 3.37 software for KTAG or KESS V2 master clone ecu programmer:

KSuite3_37_tuningbot.com_setup .exe

KSuite3_37_tuningbot.com_setup .exe (47.1 MB)

https://mega.nz/#!RptwgQ7a!2dgPfzODA5e8cbtFVfn_7VHs_AaMmZ03-Tmb6n0Qfeg

Changelog: K-Suite version 3

K-SUITE 3.38 – K-TAG TRICORE SERVICE MODE TC1762 TC 1766 TC1782
K-SUITE 3.37 – K-TAG TRICORE SERVICE MODE TC1793
K-SUITE 3.36 – K-TAG TRICORE SERVICE MODE TC1767
K-SUITE 3.35 – KESS JEEP EDC17CP27 via OBD
K-SUITE 3.34 – KESS BMW G-SERIES MD1CP002 and MD1CS001 via OBD
K-SUITE 3.33 – K-TAG TRICORE SERVICE MODE TC1724
K-SUITE 3.32 – K-TAG MITSUBISHI , DENSO , KEIHIN, DELPHI, SID94
K-SUITE 3.31 – K-TAG TRICORE SERVICE MODE TC1797
K-SUITE 3.30 – MERCEDES EDC17CP46 via OBD
K-SUITE 3.29 – BMW MEVD17.2 , MEVD17.2.4, MEVD17.2.9 via OBD
K-SUITE 3.28 – MERCEDES edc17cp57 edc17c66 via OBD
K-SUITE 3.27 – NISSAN SH7055 and SH7058 via OBD
K-SUITE 3.26 – FIAT – JEEP  – MASERATI – LANCIA edc17c49 – edc17c79 via OBD
K-SUITE 3.25 – HONDA ACURA Keihin sh7058 and Continental mpc5554 via OBD
K-SUITE 3.24 – NISSAN INFINITI MEC100, MEC7x e DEA030 Hitachi ecu via OBD
K-SUITE 3.23 – BMW edc17 E series via OBD
K-SUITE 3.22 – CVN on VAG
K-SUITE 3.12 – DCM6.1
K-SUITE 3.20 – Bosch MG7.9.8  MEVD17.4.4 Motorola CM876
K-SUITE 3.19 – Toyota and Lexux OBD
K-SUITE 3.18 – Honda Civic Med17.9.3
K-SUITE 3.17 – Toyota Hilux Denso
K-SUITE 3.16 – SIM2K-240 Delphi DCM3.7
K-SUITE 3.15 – VAG BOSCH EDC17CP74 VIA OBD!
K-SUITE 3.14 – DSG MQB VAG TCU REMAPPING WITH KESSV2!
K-SUITE 3.13– DODGE RAM 1500 5.7 FROM TODAY IN OBD!
K-SUITE 3.12: BMW MOTORRAD BOSCH ME17.2 BMS-X IN OBD
K-SUITE 3.11: NISSAN LEAF!
K-SUITE 3.10: VOLVO DENSO VIA OBD!

Or you can use the old but functional version Ksuite v2.47

kess-v2-ksuite-2.47-download

Installing a higher version of Ksuite does not bring new protocols but adds ECUs to existing protocols and a lot of bug fixes and checksums fixes, Simos18 4.5MB…
This is not useless and the grayed out protocols are not really a problem.

And Ksuite 2.47 is even better with Kess firmware v2 5.028.   Work with simos18 very good.

If you don’t have a good Kess fw 5.028, firmware 5.017  is the best online option for you. it’s tested by real pros.

kess-v2-ksuite-2
kess-v2-ksuite-3

Compared with the older version 2.33, Ksuite 2.47 adds

New protocols:

CATERPILLAR A5E2 P 549
VOLVO 1.6 /2.0 CONTINENTAL SID807 P 489
FORD TRUCK FPT ENGINE BOSCH EDC7UC31 KLINE P 548
HUSQVARNA KEIHIN CAN P 554
ALL SIMOS 18 18.1 18.2 NEW GENERATION 4.5MB
AND MANY NEW VERSIONS 2017 ON SAME PROTOCOLS
MUCH CHECKSUMS BUG FIXED

7400 new vehicles:

kess-v2-ksuite-2.47-vehicle-list-new-1 kess-v2-ksuite-2.47-vehicle-list-new-2 kess-v2-ksuite-2.47-vehicle-list-new-3 kess-v2-ksuite-2.47-vehicle-list-new-4 kess-v2-ksuite-2.47-vehicle-list-new-5
kess-v2-ksuite-2.47-vehicle-list-new-6 kess-v2-ksuite-2.47-vehicle-list-new-8 kess-v2-ksuite-2.47-vehicle-list-new-9 kess-v2-ksuite-2.47-vehicle-list-new-10 kess-v2-ksuite-2.47-vehicle-list-new-11

Enjoy!

Ktag Kess V2 NO 12V (customer solution)

Hi all and thanks all for your responses. Here, i collect working solutions of Ktag or KESS V2 NO 12V. Hope it helps someone out.

Part 1: Cannot get 12v of output from Kess V2
I use a AC power to connect to my kess V2 adapter. The seller gave it. it it 12v and 1A.

When I use my kess I’m following the next steps.

1 ) Connect the adapter to kess unit
2 ) Connect the ac power adapter to the adapter
3 ) Connect the usb cable to kess unit and the computer and tun the software

My kess read ecus by OBD port. I read a seat leon 1.9 BXE perfectly. It is other edc16 ecu.

The Ksuite shows it has 12,16V-12,30V all time while it is trying to read.

I tested my power supply and it give 12 volts

Solved!

25-1

Part 2: Ktag NO 12V

Got a K TAG Clone since a few months. did about 10 ecus with it, no problem! Since today i’ve got no 12 volt on red wires. Normally when i click read 12v appears on red and orange wires. Now only on orange. When i connect red and orange together everything works like normal.

Here is the board with faulty component(s)

25-2

Changed this component and it worked.

25-3 25-4

Part 3: Ktag Kess V2 working good with 12V

Ktag Kess V2 with best components works good

Note that Red PCB version works better than Blue & Green versions

Ktag 7.020 maximum quality:

http://www.obd2tool.com/goods-5023-Firmware+KTM100+KTAG+ECU+Programming+Tool+Master+Version+with+Unlimited+Token.html

Kess v2 5.017 of maximum quality:

http://www.obd2tool.com/goods-6931-Newest+KESS+V2+Manager+ECU+Tuning+Kit+Master.html

Newest ktag kess v2 red pcb:

http://www.obd2tool.com/goods-6983-Kess+V2+V5017+Plus+Ktag+V7020+ECU+Programmer+Master+Version+No+Tokens+Limited.html