Tag: Chrysler diagnostic tool

wiTech-MicroPod-2-key-programming-1 (2)

Does your wiTech MicroPod 2 support FIAT 500L (BF)

Does your wiTech MicroPod 2 support FIAT 500L (BF) Answer: Yes, wiTech supports it. Part 1: Two Routines that Must Be Run Upon Arrival Part 2: Maintenance Light (Wrench Light) in EVIC Part 3: Programming a Key In detail… Part 1: FIAT 500L (BF) – Two Routines that Must Be Run

Witech-Possible-to-Write-VIN-into-2015+-Dodge-PCM-6 (2)

Witech Possible to Write VIN into 2015+ Dodge PCM?

Purpose: to perform a PCM replaced procedure to learn/synch the skim / write vins on a 2015+ Dodge. Question: I have a good quality Micropod II clone registered for online use with Witech 17. Is this possible? If yes, how? My micropod clone has firmware version 2.4 and is registered so

How-to-use-Chrysler-wiTech-MicroPod-2-Diagnostic-Programming-Tool-1

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

Notice: Please don’t connect the network when use it , or the hard disk will be damaged cant working !!! 1.Connect the hard disk with your laptop , start your laptop ( Please dont connect the network ) 2.If cant find the hard disk , or with blue screen ,

V17.03.01 wiTech MicroPod 2 technical suppport

Part 1: v17.04.27 wiTECH download link: Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack: Part 3: How to use MicroPOD II clone for auto key programming Part 4: How to fix wiTech MicroPod 2 V17.04.27 is not registered Part 5: Costomer Feedback Part 6: wiTECH MicroPod II

How to install DRBIII Emulator for Chrysler wiTech Micropod 2 on Windows 7 Pro 32-bit?

The procedure for installing DRBIII Emulator on Windows 7 Pro 32-bit: 1: Start with a fresh install of Windows 7 Pro 32-bit.   2: Install all the necessary drivers for your laptop.   3: Set the clock to the current date and time. (It didn’t work when set to 01/01/2017)  

wiTECH MicroPod II v17.03.10 clone review Dodge Avenger 2014 OK

Just ordered a Chinese clone Chrysler Micropod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from a blog, I put the site below) and online