CGDI MB write the original key through the NEC adapter

How to use CGDI MB to write the original key through the NEC adapter?

Here we go for procedure.

Please insert the key into CG-MB device

CGDI-MB-1

Click ”Read key/chip’” and get related key information.

CGDI-MB-2

Disassemble the key, take the chip out, and solder it to the NEC adapter.

CGDI-MB-3

Click on “Read key /chip” and view related information.

CGDI-MB-4

Reset and erase new key

CGDI-MB-5

Click open/write, please do by following the on-screen instructions.

CGDI-MB-6

Choose一unused key position data,click and open it.

CGDI-MB-7

Write success fully.

CGDI-MB-8

Take the chip out, weld NEC adapter back the key, get on the car.

CGDI-MB-9

User Manual for CGDI Pro MB car key add

Topic: Step-by-step procedure on how to use CGDI Prog MB to add Mercedes Benz car key by OBD2TOOL.

6-1

Step 1: Click on “Lock (EIS)
6-2

Step 2: Click on “Read EIS data”

6-3

Step 3: Click on “Computer Password”, then click on “Copy key with key”

6-4

Step 4: Click on “Other Keys” (One generation of key 705E6 key), then click on “OK”.

6-5

Step 5: Please insert the key into EIS and click OK.
6-6

Step 6: Please insert the key into the device and click on OK!

6-7
Step 7: Collecting the data, do not remove the key.

6-8

Step 8: Please insert the key into EIS and click OK.
6-9

Step 9: Please wait for 7 seconds.

6-10

Step 10: Please pull out the key from the EIS, and then click OK!

6-11
Step 11: Please insert the key into the EIS again and click OK!

6-12