How to Use CGDI Benz Prog to Reset Benz ME9.7 ECU on Bench

Here OBD2 show the procedures on how to use CGDI Prog Benz Monster to reset/renew Benz ME9.7 ECU.

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-1

Procedures:

Build wire connection between ME9.7 ECU,CGDI MB programmer and computer

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-2 Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-3

Open CGDI Benz software,click “Wiring Diagram”,then select “ECU”à”ME9.7” to check the your connections are correctly.
Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-4

Select “Auto Computer”,then click “Read”

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-5

After reading process completing,you can see vehicle information on the software.

Click “Get” to get erase password

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-6

Wait for process…
Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-7

Erase password calculated successfully

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-8

After then click “Erase” button

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-9

Erase successfully

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-10

And now you can read the ECU information again to check ME9.7 status.

Use-CGDI-Benz-Prog-to-Reset-Benz-ME9.7-ECU-on-Bench-11

Done!