CGDI BMW V2.6.0 Updated EWS1-3 Key Programming

Good News!!! New released CGDI Prog BMW software adds BMW EWS Key Programming.

CGDI BMW V2.6.0(2019-03-05):

1. Added: EWS1-3 key matching function.

2. The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.

3. The BMW data modification adds support for both N13 and N55 engine data.

update-cgdi-bmw

How to use CGDI BMW do “BMW Data Modify” on N20 engine

It is simple to modify BMW N20 engine data with CGDI BMWCG Pro (9S12).

CGDI-BMW-do-BMW-Data-Modify-1

1.N20 engine physical drawing.

CGDI-BMW-do-BMW-Data-Modify-2

2.Read EEPROM data in the engine with CGDI BMW or CGpro (9S12).

CGDI-BMW-do-BMW-Data-Modify-3

3.Go to CGDI BMW “CGDI modify data”, select “N20” first, load a good copy of the data, manually enter the VIN and ISN you want, and save the new data.
CGDI-BMW-do-BMW-Data-Modify-4
CGDI-BMW-do-BMW-Data-Modify-5
CGDI-BMW-do-BMW-Data-Modify-7
CGDI-BMW-do-BMW-Data-Modify-8
CGDI-BMW-do-BMW-Data-Modify-9

4.Write the newly generated data to the engine with CG100 or CGPRO

CGDI-BMW-do-BMW-Data-Modify-10

Done.

How to use CG-PRO to program Jaguar Land rover KVM key

Post is on how to use CG-Pro to program Jaguar Land rover KVM key perfectly in step by step procedure.

Part 1: Read out the data from smart computer and anti-theft computer.

Remove the smart computer and the IMMO box from the car.

cg-pro-1

BCM immo box

cg-pro-2

Image 2: Smart ECU RFA

Wiring according to the wiring diagram in the software, click on “Diagram” to follow.

cg-pro-3
BCM wiring diagram in the CG Pro software.

cg-pro-4

BCM physical wiring

cg-pro-5

Land Rover RFA 2m53J 9S12XET256 wiring diagram in the CG Pro 9S12 software.

cg-pro-6

Land Rover RFA smart ECU physical wiring:

You need not connect the CLK line first, if you are prompted to decrypt when reading, then connect the CLK line according to the software wiring diagram.

cg-pro-7

Choose BCM or RFA module, read and save the data.

cg-pro-8

cg-pro-9

Note: Do not unplug the wiring immediately after the data is read out successfully, later you will write key and then rewrite data.

Part 2: Load the data into CG Pro software to program key

Click on “Key” – ” Jaguar / Land Rover” – Model [KVM – XEP100 (BCM) for example], then click on “Key Function” to enter the key programming menu incl. load KVM DFLASH, load KVM EEPROM, Load BCM DFLASH, Read key, Write key etc.

cg-pro-10

Menu options:

Step 1: Load KVM DFLASH

Step 2: Load KVM EEPROM

This function is for emergency start (optional option). If you need to operate this option, please read out BCM immo data and meanwhile tick on this option when key is programming, then load BCM data.

Step 3: Place a blank key into the CG Pro key programmer, click on “Read key” button.

***Can read key ID and check if the key is placed correctly.

Step 4: Select key position and then click on “Write key” button.

cg-pro-11 cg-pro-12
Please save the data in the order of DFLASH,EEPROM,BCM.

Part 3: Rewrite the data generated after key programming.
1.Back to the main menu where you read out the data just now.
2.Open the corresponding data saved after the key is wrote.
3.Write data after connecting the computer.

Done!

Now, you can unplug the cables from the computer and CG Pro, then reinstall the KVM module back to the car.And for more CGDI Key Programmer,you can check here:CGDI Programmer

CG-Pro 9S12 Freescale Programmer V1.6.0.0 updated

CG Pro 9S12 Freescale Programmer V1.6.0.0 updated (2018.08.04):

CG Pro 9S12 Key Programmer Highlights:

Read and write any BMW CAS 1-4, Porsche BCM, Mercedes-Benz EIS, Audi BCM2 Etc anti-
theft computer (100% stable security, subject to domestic test users alike)

1.Add Immobilizer
Land Rover Discovery 3
2.Add Dashboard
Honda Fit High
Honda Fit Low
Honda Vezel
Honda XR-V
Honda Greiz
Hyundai 2016 Carens
Hyundai Sonata 9
Hyundai Sonata 9 V2
KIA 2016 K3
KIA 2016 K5
Suzuki 2017 Jimny
BMW F Series (3 Series)
ChangAn ZhiXin II
3.Add Gateway, Support for CGMB Gateway data writes
Benz 204/212-1L15Y (FLASH)
Benz 204/212-3M25J (FLASH)
4.Add chip
Motorola-9S08 9S08LG16-0M48V
Motorola-9S08 9S08LG16-0M48V
Fujitsu MB91F061S
Fujitsu MB91F062BS
Fujitsu MB91F467S
Microchip PIC18F24J11
Microchip PIC18F25J11
Microchip PIC18F26J11
Microchip PIC18F44J11
Microchip PIC18F45J11
Microchip PIC18F46J11
Microchip PIC18F26J13
Microchip PIC18F27J13
Microchip PIC18F46J13
Microchip PIC18F47J13
Microchip PIC18F24J50
Microchip PIC18F25J50
Microchip PIC18F26J50
Microchip PIC18F44J50
Microchip PIC18F45J50
Microchip PIC18F46J50
Microchip PIC18F26J53
Microchip PIC18F27J53
Microchip PIC18F46J53
Microchip PIC18F47J53
Microchip PIC18F6620
5.Fixed the problem that CAS2-2K79X read failure
6.Optimizing code to improve the stability of program operation.

CGDI Prog BMW MSV80 Car Key Programmer Activation on a new computer

It’s free to active CGDI Prog BMW MSV80 Key Programmer on a new computer and you can operate it by yourself, also you can provide the seller with the serial number for remote assistance.

How to activate CGDI Prog BMW MSV80 programmer (bought before November 2017)?

If your CGDI Prog BMW MSV80 key programmer was bought before November 2017, it needs activation when you receive it. Please follow the steps as below:

1). Download software from official website http://www.cgprogcar.com/, there will be user manual too in the software catalogue.

CGDI Start displays “Device activation time remaining -1 days”, it means the device is not active.

11-2

Click “Active”

11-3

Copy the SN and provide it to the seller, and not close this dialog.

11-4
Enter the activation code from uobdii, click on “Active”.

11-5

CGDI Prog is activated , please wait until it succeed.

11-6 11-7 11-8

Restart CGDI Start, you can see it displays ” Device activation time remaining 90 days”, the activation succeed and CGDI Pro is working.

11-9

*Note: This device need activate every 3 months, when it’s invalid, please don’t worry,  just provide the seller with serial number again to activate for free.

If your CGDI BMW key programming equipment was bought after November 2017, please directly download software from official website http://www.cgprogcar.com/and use. It will get invalid every 3 months too, when it requires activation, please pass us serial number for free.

CGDI Prog BMW Key Programmer

CGDI Prog BMW MSV80 is an excellent programmer designed for auto diagnostics, programming and security maintenance. Here, i will make clear how to use the CGDI Prog BMW key programmer device.

19-1

Key Programming for BMW CAS1/CAS2/CAS3

Key Matching & All key lost for CAS4 /CAS 4+

Connection: through OBD

Features:

Runs fast with safety

Programs keys for a short time

Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.

3.BMW key inspection,can check key what status in.

4.BMW engine computer DME replacement.

CGDI Prog On Obd2tool.com Car list:

19-2

BMW key programmer for sale:

AK90 key programmer:

read all EWS key information from EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4 system from 1995-2009

AK300+ BMW CAS Key Maker :

only work for BMW from 2002 -2009 years with new BMW CAS,CAS2,CAS3,CAS3+.

YanHua CKM100 key programmer:

Old BMW (EWS2.EWS3.EWS4)

BMW 1/3/5/6/X (E87.E90.E91.E92.E60.E61.E63.E70.E71) series black shell

CAS 2

BMW 1/3/5/6/X (E87.E90.E91.E92.E60.E61.E63.E64.E70.E71) series black shell CAS 3/3+

BMW 7 series E65, E66, CAS

BMW Multi Tool:

work for BMW CAS 1 CAS2 CAS3 CAS3+ CAS4key programmingby OBD2

VVDI2 BMW:

Read/Write EWS, Read CAS information, Read/Write CAS EEPROM,

Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with

ELV, Key Learn(immo), File Make Key, Unlock Key, File Change KM, CAS Repair etc

OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS

EEPROM and FLASH)

OBD Function

Support CANBUS100, CANBUS500 and KWP protocol.

Diagnostic CAS information

Key Learn

1) Get Key Info

2) Write Key Info

3) Prepare dealer key with programmer (Support CAS1, CAS2, CAS3,

CAS3+, ISTAP)

4) Prepare dealer key with ignition switch (Support CAS1, CAS2, CAS3,

CAS3+, ISTAP)

5) Program Key info

6) Enable/Disable Key (Support CAS1, CAS3, CAS3, CAS3+, CAS4,

CAS4+)

7) Clear DTC/Shadow

Read/Write CAS EEPROM

Change KM stored in CAS

Read/Write synchronization codes stored in CAS

Synch DME – CAS

Synch CAS – ELV

Read/Write EWS EEPROM

? File Make Key

Support following types:

EWS1

EWS2

EWS3EWS4

CAS1(0K50E)

CAS2(2K79X)

CAS3(0L01Y)

CAS3+(0L15Y/0M23S): Support encrypt version and ISTAP version

CAS4 (F – Series 1L15Y)

CAS4 (F – Series 5M48H): Support CAS4 encrypt version

? File Change KM

Support following types:

EWS3

EWS4

CAS1(0K50E)

CAS2(2K79X)

CAS3(0L01Y)

CAS3+(0L15Y/0M23S)

CAS4 (1L15Y)

CAS4 (5M48H)

M35080(E – Series cluster)

F – Series cluster

? Unlock key

Support unlock key for CAS1/CAS2/CAS3/CAS3+ prepared by VVDI2

? CAS Repair

CAS1 Repair (OBDII)

ISTAP Repair (OBDII)

How to read MSV80 by CGDI Prog BMW Key Programmer

Program BMW FEMBDC Key by VVDI2, Lonsdor K518, CGDI or Yanhua FEM

Lonsdor K518ISE, CGDI Prog BMW, Xhorse VVDI2, Yanhua BMW FEM/BDC key programmer all are verified to program FEM/BDC key and all keys lost without issues. But which tool is best for BMW FEM BDC key programming?

Look here and you’ll know all:

14-1

Lonsdor K518ISE program BMW FEM BDC key

CGDI Prog BMW OBD program FEM key

Xhorse VVDI2 BMW do coding/programming to FEM BDC

Yanhua BMW FEM key programmer add a new key

14-2

1 How to use Lonsdor K518ISE to program BMW FEM BDC key?

Three steps: read key info–>pre-process FEM/BDC system–>make a dealer key

In details…

Step 1: read key info

MUST read key information first

Step 2: pre-process FEM/BDC system

MUST DISCONNECT THE BATTERY

1: OBD back up original coding data:

On the car or test platform, connect to FEM/BDC system, then back up original back up coding files via OBD

2: read out EEPROM backup data & generate a service-mode EEPROM:
-> Disassemble FEM/BDC module, find out chip 95128 or 95256, read EEPROM data using a ECU programming tool: VVDI-Prog, Orange5 and the like;
-> Copy the EEPROM data into to the Lonsdor K518ISE customfile folder;
-> Run the program, read original EEPROM data and generate a service-mode EEPROM, upload data of the service-mode EEPROM, write it into chip 95128 or 95256 with help of a ECU programmer
-> Restore FEM/BDC system, supply battery to the car and connect via OBD

14-3

3: programming
-> This step need to be done on the BMW FEM/BDC test platform;
-> Make sure that Step 1 & 2 is finished
-> Connect FEM/BDC system to power supply and connect to the OBD port

4: restore EEPROM data
-> disassemble FEM/BDC module, write original EEPROM data (Step 2) into chip 95128/95256
-> restore FEM/BDC system, connect to OBD

5: restore coding data
-> load the backup coding files (Step 1), restore coding information via OBD

6: pre-processing is complete.

Step 3: make a dealer key

1: Lonsdor K518ISE read out data, select the will-be key position

2: a “used”key to make a dealer key

All keys lost: enter 32bit ISN codes to make a dealer key

3: put the key near the car immo induction loop

14-4
4: detect the original key, read out immo data

5: put a new key near the car immo induction loop

6: detect the key key, key learn (don’t move the key, keep stable)

7: key learn is complete

Step 4: disable the key

1: Lonsdor K518ISE read out data, select the key ID position to disable

2: put a “used” key near the car induction loop

3: K518ISE system tries to connect to CAS, disable the key with current ID position, disable key successfully

Step 5: enable the key

1: Lonsdor K518ISE read out data, select the key ID position to enable

2: put a “used” key near the car induction loop

3: K518ISE system tries to connect to CAS, enable the key with current ID position, enable key successfully

Step 6: delete the key

1: K518ISE read out data, select the key ID position to delete

2: read FEM/BDC key password

3: delete the key successfully; the key position is blank

THE MOST IMPOERTAN TIPS

1: You must read key info before everything you’ll do

2: to pre-process FEM/BDC, you should pay attention to:

– backup coding codes to continue

– disconnect to the power supply/battery, have a ECU programmer to read EEPROM data, up load data in K518 customfile folder, read new EEPROM data loaded just now, generate service-mode EEPROM data, read service-mode EEPROM data, write data into the chip, install CPU on the car

– ECU programming: need 6 min, with power supply connected

– disconnect to the power supply, disassemble CPU, write the original EEPROM data into the chip, install CPU on the car, connect to the power supply, make sure communicate is successful

– upload coding files (Step 1), restore original coding info to pre-process, then make a dealer key

3: 32bit ISN codes is required to program a new key when ALL KEYS ARE LOST

Note: If you want to program BMW FEM key when all keys lost, you are required to enter 32-digit ISN code to access.

14-5

Job’s done with Lonsdor K518ISE!

14-6

2 How to use CGDI Prog BMW to OBD program FEM key

Go to BMW OBD Key Match

14-7
The current FEM/BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power, the programming process, please keep the equipment cable connection

14-8

Please remove the FEM/BDC and then use the CGDI Prog programmer to read and save data from the P5XXX EEPROM chip on the FEM/BDC computer board, then click on Next

14-9

Read the original car EEPROM data file

14-10 14-11 14-12

Use the CGDI Prog BMW MSV80 Key Programmer to write the calculated new data to the 95XXX EEPROM chip, then put the FEM/BDC back into the car, thn click on Next

14-13

Car battery voltage: 11.93V

Prepare the programming ECU

Security authentication is in process

Safety certification through

The ECU is being programmed

14-14
Please remove the FEM/BDC and then use the CGDI Prog programmer to read and save data from the P5XXX EEPROM chip on the FEM/BDC computer board, then click on Next

14-15

Setting code

Coding is successful

14-16 14-18

14-17

FEM/BDC key matching need to enter engine ISN, please select the way of input ISN code

14-8

OBD is connecting

OBD KWP-CAN 500kbps connection is successful

14-19

Loading the code data file

14-20 14-21 14-22
Coding is successful

3 Xhorse VVDI2 BMW FEM/BDC coding/programming

BMW FEM/BDC Coding/Programming with VVDI2 full kit 4.3.0 above

14-23

step 1:
1.read FEM/BDC coding via OBDII or on the bench
2.you’d better not close this window after starting this procedure

step 2:
1.open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer
2.load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip
3.restore FEM/BDC shell, provide -12v and connect it via OBD

step 3:
1.this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2
2.provide +12v to FEM.BDC and connect it via OBD

step 4:
1.open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip
2.restore FEM/BDC shell and connect it via OBD

step 5:
loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming

Attention please!!!

– You can directly backup/restore coding

– You have to pre-setup the FEM/BDC module before deleting/adding keys or resetting keys

– You’ll be told other tools need to be used first to program the FEM/BDC system, then setup FEM/BDC via VVDI2. It happens when you do FEM/BDC key learning, and you don’t have a working software version

– You’d better not close the VVDI2 interface when you pre-setup FEM/BDC

– You need do with 95128(FEM) or 95256(BDC) chip when pre-setup FEM/BDC

Note: there are two 8-pin chips; do not disassemble the wrong chip; better refer to the wiring diagram

– You must restore original EEPROM data, restore coding when pre-setup FEM/BDC. If you fail to restore coding or the remote cannot start or something wrong with the window (or other failures probably) after coding restore and FEM/BDC installation, please use other tools to do re-coding FEM/BDC

– Ask tech support obd2tool.com for help, if the replay sounds continuously after supplying power to the FEM/BDC. Usually, it needs programming.

14-25

4 Yanhua BMW FEM key programmer add a new key

There are 5 steps for you to have Yanhua BMW FEM/BDC programmer add/program a new key.

Step 1: backup (read) coding data

Step 2: update/program ECU

Step 3: program/learn (add) key

Step 4: restore (write) coding data

Step 5: delete keys disabled

How to Program BMW FEM key with Yanhua BMW FEM/BDC programmer

In summary,

all tools above (Lonsdor K518ISE, CGDI BMW, VVDI2, Yanhua BMW FEM/BDC key programmer) can work good in FEM/BDC programming. So, Lonsdor K518ISE vs CGDI BMW vs Xhorse VVDI2 vs Yanhua tool, which best for OBD program BMW FEM/BDC? it depends on your budget and future use.

For BMW only: CGDI Prog BMW or Yanhua BMW FEM/BDC key programmer

For VAG+BMW: Xhorse VVDI2 is the best solution.

For universal key programming: Lonsdor K518ISE key programming machine never fails.