How to use CG-PRO to program Jaguar Land rover KVM key

Post is on how to use CG-Pro to program Jaguar Land rover KVM key perfectly in step by step procedure.

Part 1: Read out the data from smart computer and anti-theft computer.

Remove the smart computer and the IMMO box from the car.

cg-pro-1

BCM immo box

cg-pro-2

Image 2: Smart ECU RFA

Wiring according to the wiring diagram in the software, click on “Diagram” to follow.

cg-pro-3
BCM wiring diagram in the CG Pro software.

cg-pro-4

BCM physical wiring

cg-pro-5

Land Rover RFA 2m53J 9S12XET256 wiring diagram in the CG Pro 9S12 software.

cg-pro-6

Land Rover RFA smart ECU physical wiring:

You need not connect the CLK line first, if you are prompted to decrypt when reading, then connect the CLK line according to the software wiring diagram.

cg-pro-7

Choose BCM or RFA module, read and save the data.

cg-pro-8

cg-pro-9

Note: Do not unplug the wiring immediately after the data is read out successfully, later you will write key and then rewrite data.

Part 2: Load the data into CG Pro software to program key

Click on “Key” – ” Jaguar / Land Rover” – Model [KVM – XEP100 (BCM) for example], then click on “Key Function” to enter the key programming menu incl. load KVM DFLASH, load KVM EEPROM, Load BCM DFLASH, Read key, Write key etc.

cg-pro-10

Menu options:

Step 1: Load KVM DFLASH

Step 2: Load KVM EEPROM

This function is for emergency start (optional option). If you need to operate this option, please read out BCM immo data and meanwhile tick on this option when key is programming, then load BCM data.

Step 3: Place a blank key into the CG Pro key programmer, click on “Read key” button.

***Can read key ID and check if the key is placed correctly.

Step 4: Select key position and then click on “Write key” button.

cg-pro-11 cg-pro-12
Please save the data in the order of DFLASH,EEPROM,BCM.

Part 3: Rewrite the data generated after key programming.
1.Back to the main menu where you read out the data just now.
2.Open the corresponding data saved after the key is wrote.
3.Write data after connecting the computer.

Done!

Now, you can unplug the cables from the computer and CG Pro, then reinstall the KVM module back to the car.And for more CGDI Key Programmer,you can check here:CGDI Programmer

CG-Pro 9S12 Freescale Programmer V1.6.0.0 updated

CG Pro 9S12 Freescale Programmer V1.6.0.0 updated (2018.08.04):

CG Pro 9S12 Key Programmer Highlights:

Read and write any BMW CAS 1-4, Porsche BCM, Mercedes-Benz EIS, Audi BCM2 Etc anti-
theft computer (100% stable security, subject to domestic test users alike)

1.Add Immobilizer
Land Rover Discovery 3
2.Add Dashboard
Honda Fit High
Honda Fit Low
Honda Vezel
Honda XR-V
Honda Greiz
Hyundai 2016 Carens
Hyundai Sonata 9
Hyundai Sonata 9 V2
KIA 2016 K3
KIA 2016 K5
Suzuki 2017 Jimny
BMW F Series (3 Series)
ChangAn ZhiXin II
3.Add Gateway, Support for CGMB Gateway data writes
Benz 204/212-1L15Y (FLASH)
Benz 204/212-3M25J (FLASH)
4.Add chip
Motorola-9S08 9S08LG16-0M48V
Motorola-9S08 9S08LG16-0M48V
Fujitsu MB91F061S
Fujitsu MB91F062BS
Fujitsu MB91F467S
Microchip PIC18F24J11
Microchip PIC18F25J11
Microchip PIC18F26J11
Microchip PIC18F44J11
Microchip PIC18F45J11
Microchip PIC18F46J11
Microchip PIC18F26J13
Microchip PIC18F27J13
Microchip PIC18F46J13
Microchip PIC18F47J13
Microchip PIC18F24J50
Microchip PIC18F25J50
Microchip PIC18F26J50
Microchip PIC18F44J50
Microchip PIC18F45J50
Microchip PIC18F46J50
Microchip PIC18F26J53
Microchip PIC18F27J53
Microchip PIC18F46J53
Microchip PIC18F47J53
Microchip PIC18F6620
5.Fixed the problem that CAS2-2K79X read failure
6.Optimizing code to improve the stability of program operation.