5 DIY Car Maintenance Tips for Extending Your Car’s Life – Checklist

Your car is a work of art – really. Entire teams have spent years designing, testing and tweaking your auto’s internal design to ensure that it meets your needs. But without maintenance, the vehicle that has been designed with the utmost care might start to display its age.

The engine will wear. The transmission will wear. Your vehicle will become less reliable.

And sure, there are some manufacturers that are known to have problems while others are known for cars that can last hundreds of thousands of miles with little to no problems.

You’ll want to do a few things well before even thinking about your vehicle’s maintenance with Car Repair Software:

1.  Read the manual. The manual will have your maintenance schedule and all of the information you need to know to properly maintain your auto.
2.  Pay attention to your vehicle. Your vehicle’s normal driving condition will change over time. Pay attention to any changes in your vehicle, such as slower response time, bucking or any other “sicknesses” that may indicate a serious problem with your vehicle.
3.  Check your computer. Your vehicle has a computer that monitors your vehicle’s condition at all times. This on-board diagnostics system will display a check engine light, and it gives insight into your vehicle’s current problems. Fixd car diagnostic is a cheaper OBD-II reader that can be used for diagnosing car problems.
4.  Find a go-to mechanic. Unless you’re willing to get your hands dirty and learn on-the-go, you need to find a go-to mechanic that can help you correct some of the more intense problems with your automobile. This mechanic should be honest and willing to work with you on an acceptable time schedule.

These are just some of the basics that can go a long way in ensuring that your vehicle stays in tip-top shape for years to come.
Checklist of Maintenance Tips to Extend Your Vehicle’s Lifespan

You spent a lot of money on your vehicle, so it only makes sense to do everything you can to extend the vehicle’s lifespan. The 5 DIY maintenance tips to extend your vehicle’s lifespan that I recommend are:

1.  Change the air filter (12 months/12,000 miles)
2.  Change the oil and oil filter.
3.  Check all of your fluids often and top off.
4.  Clean the battery terminals.
5.  Change the spark plugs.

Print out this checklist to better be able to maintain your vehicle. I recommend that you pick a manual for your vehicle that provides you with vehicle-specific instructions on repairing and maintaining your vehicle.

But we’ll provide some information for these basic maintenance tasks below.

1. How to Change an Air Filter

Changing an air filter is so easy that you often don’t need tools, and when you do, a ratchet is often the only thing you’ll need. The air filter should be changed every 12 months or 12,000 miles – whichever comes first.

You’ll need to:

1.  Open the hood of the car.
2.  Locate the black box with clips on the side.
3.  Open the casing.
4.  Note the placement of the filter.
5.  Remove the filter.
6.  Place the new filter inside.
7.  Close the case and position the metal clips again.

That’s it. Online forums or a good manual will help you locate the air filter.

2. How to Change Your Oil
If you have 45 minutes, you can change your car’s oil. You’ll need to have the following tools available:

*   Oil filter wrench
*   Ratchet
*   Funnel
*   Oil pan

Follow the mileage benchmark set in your manual for when to change your oil. Now, make sure the vehicle is cool. You’ll also need a car jack and need to know how to jack up your vehicle.

Now, follow these steps:

1.  Locate the oil pan and place the oil pan below.
2.  Remove the drain plug and allow to drain fully.
3.  Replace the plug.
4.  Remove the oil filter with your wrench.
5.  Lubricate your new oil filter with new oil.
6.  Fill the filter partly with new oil.
7.  Screw on the new filter with your hand.
8.  Lower the vehicle and open the hood.
9.  Use your funnel to fill the engine with new oil.
10. Check the oil level with your dipstick making sure the levels are sufficient.
1.  Discard your old oil responsibly.

3. How to Check Your Vehicle’s Fluids


You’ll be surprised at how many check engine lights come on per year because fluid levels remained low for too long. This is Autel Scanner, and you’ll need to have any required fluids available. Simply open the hood, and locate the dip-stick or level for:

1.  Oil
2.  Coolant
3.  Power steering fluid
4.  Windshield washer fluid
5.  Brake fluid

Check and replace fluids as needed. If the fluids are dirty, you may need to drain them and replace them.

4. How to Clean the Battery Cables


If your battery cables get dirty, you’ll have problems starting your vehicle. A good rule of thumb is to clean these cables every time you check your fluids – once every month or every other month will suffice.

You’ll need a few items:

*   Wire brush
*   Wrench or socket

A quick visual check will signal you to any erosion which may exist. Once you’ve checked for erosion, you’ll want to:

1.  Remove the battery cables by locating the nut and loosening them.
2.  Remove the ground first which is often the negative cable. There’s a guide to help you here.
3.  Clean off any corrosion with the wire brush.
4.  Put the posts back on and tighten as needed.

You can also use corrosion removing fluid, but I find the wire brush to work better.

5. How to Change Spark Plugs


Spark plugs are a bit complicated to replace, so make sure you’re comfortable before following these steps. You’ll also need a ratchet, socket wrench, spark plug socket and a 12″ socket extension to get started with MB STAR Diagnostic Tool.

Now, open your hood and locate your spark plugs.

1.  Remove the first wire.
1.  Use your socket and extension to remove the first spark plug.
1.  Apply anti-seize compound to the threads of the spark plug ignoring the lower threads.
1.  Install the new spark plug by hand and then tighten slightly. Use a torque wrench if possible.
1.  Re-attach the wire.
1.  Repeat for all spark plugs.

You need to ensure that you do this one wire at a time so that the wire order doesn’t get mixed up. Buy pre-gapped spark plugs and a torque wrench to follow the right specs for your vehicle.

Diagnose Your Car for Less


Has your car’s check-engine light become so annoying that you’ve covered it with tape? You’re not alone. But there’s a better way: You can find the problem with an Onboard diagnostic (OBD II) scanner and fix it.

Each of the top-selling scanners we purchased from obd2tool is small enough to fit into a glove box and costs less than $100. But despite their low price, they can ferret out complex car problems. All of them work on cars made since 1996. Some are handheld devices with built-in screens, while others connect wirelessly to a phone or tablet. We took all of them on test-drives that included monitoring the car’s dynamic data and introducing faults.

Although an Auto Scanner Tool can’t do the actual repair, it can turn off the check-engine light and, for example, distinguish a broken catalytic converter from a clogged EGR valve, potentially saving you hundreds of dollars, all without requiring you to get your hands dirty.

We tested each OBD II Scanner and rated them based on features, setup and ease of use. We’ve also added the Amazon rating and Fakespot grade (which looks for fake reviews) for each scanner.

Not only will a good Professional Diagnostic Tool save you money, it’ll also make your life much easier. If you’re looking for a good OBD-II scanner that’ll give you the best bang for your buck, there are a few things that you need to know in order to make a well-informed buying decision.

A Broken Motor Mount Checking in a Mercedes-Benz AMG


Mercedes-Benz AMG versions are built with a high-end engine. If your motor mounts become damaged, it is critical to change them no matter what kind of  AMG Mercedes models you own. With a few tips, it is quick for one to examine the condition of his or her Mercedes-Benz’s motor mounts.
Things You’ll Need
Car Scanner Flat-head screwdriver
Owner’s manual
1. Open your Mercedes-Benz hood and use the hood rod to secure it in an upright position. Some Mercedes hoods do not have a hood rod and the hood will stay up on its own.
2. Locate your engine’s motor mounts. Use your owner’s manual to help you locate the exact positioning of your motor mounts. The number of motor mounts may vary depending on your Mercedes model.
3. Visually examine the motor mounts. Observe if there are cracks, separations in the rubber from the metal, missing bolts, broken brackets, fluid leaking or warped or compressed rubber. Any of the visual signs of deterioration or damage will indicate that the motor mount needs to be changed.
4. Use a flat-head screwdriver to press down on the rubber part of the motor mount. If the rubber does not bounce right back into place and instead stays compressed, then you need to replace your motor mounts.
5. Start your Mercedes engine. Place your “Emergency Brake” into the “ON” position. Keeps your foot tightly on the brake pedal while switching your Mercedes into the “Drive” gear? With your foot pressed down on the brake pedal, slowly press down on the gas pedal to rev your engine. Monitor your rpm and do not allow the engine to enter the “Red Zone” on your rpm dial, as this can damage your vehicle. If the engine revs and you do not feel a vibration by your feet, your engine mounts should be in good condition. Revving the engine will cause the engine to shake when the motor mounts are not securely holding the engine into place. The shaking will cause a noticeable vibration and shaking inside of the vehicle, which will let you know it is time to replace your Mercedes Star Diagnostic.
6. Drive your Mercedes around in an empty parking lot or on a street with little traffic. Press your foot on the gas pedal to accelerate. While accelerating, notice if you feel any vibrations. Abruptly press your foot on the brake. If the vehicle shakes from side to side while slowing down, then you need to replace your motor mounts.

How To Use OBD Scanner


The use of the word OBD has become common on the lips of the motorists. It’s usually the reference of the OBD1 and the OBD2 scan tool is what has rather caused more of the confusion. The word OBD just refer to the on board diagnostics. The on board diagnostics are just tools meant to assist the motorist cases brought about b y the problem of engine gas emissions.

The introduction of this system was through a protracted process which was first approved in California resources board. Kit has in fact taken root to cover several vehicle brands as covered by the different OBD scan machines available in the market.

The OBD is a hardware meant for coding which is usually located near the driver. The ease of connection and location makes it an easy gadget for the driver to use. The obd2 scan machines are found in most vehicles especially in countries where the regulation is in force. The several beneficial attributes associated with them is what usually strikes any user. These include;

They give comprehensive and critical scanning solutions which eventually end up in giving immediate solutions to the mechanic or the motorist.

Some have a malfunction illumination lamp which helps warn the motorist if there is any fault with the engine.

With the ease of diagnosis associated with the Professional Diagnostic Tool, the process of scanning your car has been reduced to an immediate occurrence. If you require even the resetting of the engine lights, then these tools are known to be worth your company. The newly incorporated control area network CAN has been praised for its boost on the scan gadget operation.

If the breakdown is rather serious, then this tool is bound to help you get to the root. Visiting a mechanic usually comes at a price, the scan tool thus is quite economical in cutting down on the costs of car scanning. Some of the features and functions of the scan tool include;

1.Apart from controlling the area of emissions, the scan tool is also known for its control of the distance coverage of the vehicle.
2.However, with the live data feed concept which is made possible through connections to the on board computer, you are assured of timely remedies.
3.The display, retrieval and clearing of the diverse generic codes and other codes known as pending codes is another are which the tools help. If you have used car or is planning to buy one, then this OBD 2 is what you must have.
4.With its compatibility and use pegged on its size which is small and user friendly no worry on the need for space.
5.What is so encouraging is that the use of the car is not interfered with when this scan tool is put to use. In addition to the wide range of functions, it will also work on the overall status of your car.

The OBD2 compact is known to have high level of organizational capacity with the ability to organize the read codes in the alphabetical order. In this regard, getting the codes becomes easier with minimal errors. It only gives warning on what it cannot handle.

In addition, it switches off the engine lights and through a detachable cable receives power. The emission of the data in an accurate manner is usually made possible through the accompanying software.

The OBD 2 -why the fuss?

The most important thing when looking at the OBD2 scan tools are the several accompanying accessories which enable its use. For instance, the OBD2 scan tool usually has;

1.16 pin connector.
2.Accompanying software which helps connect to the car engine and the PC where the data is to be analyzed.

The secret of the auto scanner use is in most cases vested with the manufacture that are versed with the secrets of the coding protocol. This is why the scan tools are not the same though they share the same brand name of OBDS2. You can try one today.

The scan tool is made into a compact machine makes it durable. You are bound to use this OBD2 CAN compact reader for a very long period of time.

Do you know how to the scientific use of fuel additives

How to use the fuel additive to work better? Many intend to use additives owners are still hesitant, because we are not consistent with the view of additives, additives to buy more trouble. There is another kind of circumstance, a lot of people who have buy good fuel additive products but do not know how to use, also do not know how to use the obd2 scanner reviews check, that will also affect the fuel additive role play. Here we ask the repair shop of professional technicians explain to us the proper use of fuel additives.
Do you know how to the scientific use of fuel additives


For a long time the car must use, if don’t want to continuous use can also between a month with more than three times, if intervals recommended dose it slightly larger, truly effective removal of carbon deposition, improve the fuel environment. The use of the most economical method is used for the first time the way plus three times in a row, that is a new car in the first three tank, every time, in accordance with the purchase of the directions specify the percentage of adding additives. After three times, run about 3000 km to 3000 km (is different according to different road conditions and oil), again plus three times in a row, repeat this cycle is more appropriate, you can use a Launch X431 V 8inch Tablet or Launch X431 Diagun IV tools to check the performance of the car, you can see the obvious transformation.

For used cars, during the initial period, the additive will engine oil system in the gum or sediment washing down, it will lead to clogged filters and oil hole, this time to deal with the oil system, a cleaning and maintenance, and then follow the new car Add mode to continue to use, so purifying effect is more ideal.

Adding proportion is 1: 1000, 50ml bottles of additives can be with 50 liters of fuel; in addition, add should as the condition, models and and vehicle vehicle condition is good for the first time for about 3 bottles; condition decreased, underpowered vehicles need continuous use more than 5 bottles until the condition improved. Then choose the next box to add one or 1000 kilometers every time to add. If the engine is in good condition, it can be used to reduce the proportion of the mixture.
Do you know how to the scientific use of fuel additives


To remind you, as the market chaos, consumers should choose a well-known brand certified, select Do not freeloaders, should pay attention to product quality, the company strength, service assurance and brand reputation, should choose to clean the engine and hydraulic system and other conservation tools Comprehensive features well-known brands. We recommend car stick with fuel additives, keeping nozzle without clogging, no coke combustion exhaust standards; with higher mileage cars, to select super-concentrated high-quality products, and gradually clean the oil and the engine, to clean, lubricate, by Horsepower easy start effect, you can also use Autel MaxiDAS DS808 or XTOOL X100 PAD to check car, you will reconsider whether or not to use fuel additives.

Check Engine Light and What Does it Mean

Check Engine Light on?
What Does it Mean & How Do I Figure Out What it Is

We have all had our check engine light come on and think the worst. Well just because the light came on doesn’t mean there is a monumental disaster around the corner. In fact, most of the time, it is something small such as a faulty o2 sensor or your gas cap is on incorrectly. There are two different ways your check engine light warns you. First is a steady light; this indicates not an emergency, but still important enough to make an appointment. Second is flashing, this usually means there is a severe problem. If this happens, stop your vehicle immediately to avoid further damage. Don’t stress, you can find out exactly what is going on by using an (On Board Diagnostics) OBD2 Scanner, or you can go to your local auto repair shop.

An Auto Scanner Tool can help you retrieve the error codes that trigger your check engine light. These codes are defined specifically and are either (generic) universal or manufacture specific and there are five digits. I will explain them briefly below.
1st Digit: signifies the system the trouble code is related to.
B = Body C = Chassis P = Powertrain U = Undefined
2nd Digit: signifies whether it is manufacturer specific or generic.
1 = Enhanced (manufacturer specific) and 0 = Generic (the # not the letter “O”)
3rd Digit: signifies the sub system the code pertains to.
1 = Emission Management Air or Fuel 2 = Injector Circuit Air or Fuel 3 = Misfire or Ignition 4 = Emissions
5 = Idle Control & Vehicle Speed 6 = Output Circuit & Computer 7 = Transmission 8 = Transmission

What are the Most Common Check Engine Light Problems

There are a handful of problems that are the usual suspects of the dreaded Check Engine Light. The first being your gas cap. If it is not properly attached it can cause your check engine light to illuminate. The second culprit is your O2 sensor. If the sensor is malfunctioning or broken, it can effect your emissions and reduce gas mileage. Third would be your Mass Air Flow sensor. This sensor is responsible for supplying the right amount of air to your engine allowing for proper fuel distribution. Spark Plugs are also a common factor when your check engine lite is on. Your spark plugs ignite the compressed gas within your engine, when there is spark plug failure damage to the catalytic converter can happen. Additionally it can affect your engines overall performance and fuel economy. Your check engine light can alert you to more problems than I have discussed here. So if you are experiencing check engine light problems check get the codes from an Auto diagnostic tool Tool or visit your local auto repair shop to diagnose your vehicle’s trouble codes.

Which OBD 2 reader should you get for your car, the Bluetooth or compact


Making purchase decisions is not an easy thing. It becomes even more complicated when what you have to make the decision about is an item whose use is associated with a lot of importance. The OBD 2 reader has in the recent past become part and parcel of any car in the United States.

In fact, with the advent of technology, the innovation, which was the on board diagnostic, is becoming a household song, which will be sung by even young children. However much the tools are popular, the changes and diversity is the real issue which makes deciding on them to be even harder.

In the current OBD 2 reader market, the presence of the Bluetooth devices has stuck its neck like some tower of barbell. This is not to leave behind the compact Obd2 bluetooth which have always been in use since the beginning of the OBD innovation.
The compact OBD 2 readers

These are known to be the pioneers. They are commonly referred to as plug and play devices. Are fed with the codes for the universal car use and are usually used when connected physically to the car engine.  In spite of the available technology, the compact readers are usually slow acting devices which may require a lot of prompting to give the data.
The compact OBD 2 readers

The compact OBD 2 readers usually used when connected physically to the car engine.

Additionally, the readers of this category gives the user the diverse code readings but in most of the instances may require the motorist to seek the services of trained technicians to be able to get to the root of the car fault and as a result help with the repair process.

Though the universal application of the Truck Diagnostic Tool has made them have the compatibility which is more enhanced, the compact readers are still not seen to be as compatible as the diverse users may wish them to be.

Another area which was of concern with the continued use of the compact readers was on the cost of buying them which was at times seen to be relatively high. In spite of this, that would also be its strength because of the guaranteed quality and the need for no internet use.

These would be compounded further with the ever nagging fear that the device can fall down and be broken in the course of use.
The Bluetooth vehicle code reader

The advent of the wireless technology was utilized by most of the diagnostics experts to get something which would solve the weaknesses seen perennially on the compact OBD 2 readers. That was the way the Bluetooth readers came into the market.
The Bluetooth OBD 2 readers

The Bluetooth OBD 2 readers are easily updated through the online means

For their ability to work remotely through the wireless internet interface, the Bluetooth devices have been widely praised for their speed at coding. The codes would be delivered in no time with just the establishment of the connection remotely.

The flexible nature of the devices alone gives the user a hands free means of tackling vehicle fault. That is mainly because there is no need for connections using pins. That compliment alone would not make me forget the nature at which the data would be presented on its nice looking OBD 2 screen.

It is the cost of the OBD 2 Bluetooth devices which has continued to amaze most of the users. The majority are sold at mouth watering prices when compared to their counterpart in the compact category.

The Bluetooth OBD 2 readers are easily updated through the online means, a feat which can also be done on most of the compact readers, though with the latter requiring physical connections. The compact ones will need connection to the car computer system with the software to be updated downloaded and run.

The reason why most modern car users are falling head over heels for the wireless Bluetooth devices is basically because of their ability to interpret and help with the fault repair process. It has made naught of the initially complex process.
What then?

The two parameters of the modern OBD 2 has been a hard nut to crack for most of the car reader shoppers. Both of these devices are found to have some of their own strong points which enable their enthusiasts to love them. With the newer versions of both types of readers working towards efficiency, making a choice is of essence.
Your choice

Your choice

However, if you are among those who want to move with the current trends of the modern society, getting a Bluetooth OBD 2 reader would be the in thing. For those who are quite economically minded, the price of the Bluetooth devices is lower given the fact that they are usually smaller.

But wait a minute! Factor in the need to have a working internet connection when buying the Bluetooth reader. This makes them to have some hidden cost unlike with the compact ones which are plug and play devices.

The compact OBD 2 readers are usually made to look nice; though the speed is lower than that of the Bluetooth devices which may just give you the perfect opportunity to have your car engine reading result in no time.

For their wireless nature, the Bluetooth readers have been reported to fall prey to the technology hacking issues which may then put your car engine fault reading process in great jeopardy.

Getting you to make a decision on which device to use on your car may not be good given the diverse needs and the understanding scopes of each individual. If you ask me, the Bluetooth OBD 2 readers will suit any modern motorist and so fit for your car. This is subject to the available budgetary allocations you have made.

How to Check OBD 2 Diagnostics on a Toyota Camry

The user process of the Toyota Camry with the current on board diagnostic (OBD 2) scan tools has always remained a mysterious subject. Car faults on it should not remain a mystery, especially where the Toyota car is concerned. Obd ii scan tool work in its own unique ways, each request has to be treated independently.

Though each of the vehicles may be fitted with its own scan tools, it has always proven to be hard when it comes to checking OBD diagnostics on the Toyota Camry. This special Toyota car model stands out and so it would be nice if we looked at how to go about checking faults in its engine.

Why the Toyota Camry?


The Toyota is one of the popular car brands in the market from Japan

The Toyota as you are aware is one of the popular car brands in the market from Japan. Because the Asian tigers have embraced the practice of diagnostics, the Toyota Camry comes fitted with the OBD 2 port for ease of checkup.

The confusion which arises as most users seek the manner in which they can check on the OBD 2 diagnostics on the Toyota Camry is monumental. We have the solution to the whole debacle by tasking you through the step by step user process.

Ours is a guide, which simplifies all this into one off process. You may need to look at it in your free time before going into using the Autel Tools. The Toyota Camry is model is one of the car models which subscribe to the on-board diagnostic scan use.

The how to process on this car model may take the form of having to go through diverse processes and may include the following;

Locate the OBD 2 port

The location of this port is not a straight away affair which can be done at once. Because of the location of the said port differs on so many vehicles, it may prove to be a challenge.

The first step would be to ensure that you acquire an OBD 2 tool which is compliant with the Toyota Camry car model. This process may need the user to take certain steps. In most cases, there are two steps;

1.The manual check up of the diagnostics

The location of the OBD 2 port on the Toyota Camry which though is quite important may not be easy at times. The usual place for its location is usually in the area near the driver. This is not standard and is bound to change with the car.

However, you need to look under the Toyota steering wheel to locate the Auto Repair Software in for this car model. It may in some cases require you to locate the OBD 2 socket which is on the socket and is found just somewhere below the car pedals. This is usually done for the sake of convenience.

The OBD 2 port on the Toyota Camry

2.The use of software

In some cases, the Toyota Camry check up may involve the use of the internet if the user is not able to locate the required ports effectively. This may necessitate the user to download the OBD 2 port lookup for the car model.

Get to know to scan the Toyota Camry

1.Power the Toyota Camry engine, most of the diagnostics are better done with the engine on.
2.Get somewhere to note the diverse codes, or just enable the car computer memory to store the data.
3.Disable the car engine at the end. Some OBD 2 readers on the Toyota Camry may need to be left to run continuously.
4.Look up for the codes on the Toyota Camry website if your OBD 2 reader cannot give you the solutions.

When the OBD 2 user gets the signal that the check engine light function of the engine is on, it means that the connection is established. The readings can be transferred to the other aspects of the car OBD 2 mechanism for translation and action.

It is important to connect the car computer engine when the OBD 2 software is ready to be able to make the OBD 2 check up software to identify the required plug in, the user needs to run the needed software on the Toyota Camry car computer.  Follow this process;

It is with this that will make the use of this OBD 2 a straight forward affair. With all the check up process complete, the scan process picks up when the whole OBD 2 scan tool has been connected to the Toyota Camry engine. You can try this on your Toyota Camry car today.

have car diagnostic tools

These days, cars and trucks are more complex than ever. Not only are they jam packed with all of today’s most advanced mechanical components and features, but all of these sophisticated bits of machinery are all interconnected via computerized networks of interrelated car self diagnostic tools. These networks can be very useful in testing and diagnosing problems with your vehicle- but only if you have the right equipment. A lot of times, all this extra sophistication can seem like a great hassle- especially if you’re accustomed to the good old days of muscle-car simplicity where you just replace the part and fire it up. Well, for better or worse, those days are gone.

The good news is there’s plenty of Automotive diagnostic tools available that- with a little bit of time in research- you can learn to perform complex diagnostic functions with that will give you a lot more power over the ins and outs of your car or truck than you would have had otherwise.

These tools will give you the ability to figure out what is going on with your modern computerized vehicle, so that you can get it fixed and get back on the road.

1. Obd2 Scanner

An Obd2 scanner is a diagnostic system that allows onboard computers in cars and trucks to tell you what’s wrong with the vehicle. This car diagnostic tool is used for a range of self-diagnostic and reporting purposes. Unlike the earlier, OBD-I system, the Auto code reader uses the same code designations, communication protocols, and connectors for cars made by all major manufacturers. The standardization has made the previous Obd1 almost completely obsolete.

2. Ignition Tester

Also known as a spark tester, this tool is absolutely indispensable for anything that relies on spark plugs- that means your car. Any time an engine won’t start, it’s possible that the reason is that there is no spark coming from the spark plug to get the engine started. An ignition tester allows you to diagnose the problem so that you don’t go all around your car solving every other problem whether you need to or not.

3. Airbag Tester

As you can imagine, it could be quite problematic to have a non-functional air bag and not know about it until the moment you need it. And naturally, testing your airbag by whacking your bumper with a rubber mallet is not ideal. Fortunately, there is a tool that can tell you whether or not all of the electronic components of your airbag system are working correctly without setting the safety device off.

4. Fuel Pressure Tester

Like a problem with your spark plug, a problem with low fuel pressure can cause your car or truck to fail to start- and if you can’t diagnose the problem directly, then you may have to work on several different things before finally finding the problem. A fuel pressure tester tells you where your vehicle’s fuel pressure is at, whether it’s too high or two low, enabling you to solve the problem straight away.

5. Timing Lights

A timing light is a special automotive stroboscope that mechanics use to set the ignition timing of internal combustion engines that are equipped with a distributor. Modern vehicle engines require timing lights to scan ignition timing accurately so that the timing can be adjusted to the optimal range for your vehicle.

6. Emission Analyzer

In most states, drivers are required to have their Auto Repair Software checked for proper exhaust emissions before the vehicle can be tagged and allowed to drive legally on public roads. Even if you are fortunate enough to live in a part of the country where vehicle emissions are not regulated, it still might be good for your conscience to have your emissions tested and adjusted accordingly. These devices are inserted into the exhaust pipe and, in addition to checking your emissions- they can also be used to diagnose a whole host of problems. It can also play an important role in certain safety checks, help with engine tuning, and certain kinds of repairs.

7. Vacuum Tester

A vacuum test is among the simplest diagnostic tools a mechanic can have. With a simple gauge, anyone can gain valuable insight into vacuum leaks, low compression, incorrect timing, and sticking valves just to name a few. You will need to know the vacuum specifications for your engine, and bear in mind that these gauges are adjusted for sea level. That means for every 1,000 feet your location is above sea level, you will need to subtract an inch of vacuum. The simplest check to perform is a running vacuum test. Simply start the engine and let it reach normal operating temperature. Find a vacuum port and connect the gauge. The Heavy Duty Scanner should be on the manifold or below the carburetor. It shouldn’t be on the air cleaner, high on top of the carburetor, or on any of the emissions control components

What’s the best/cheapest OBD2 scanner tool that actually works?


I have a decent amount of knowledge about cars, and I need to save a little money by diagnosing my own check engine light. I know I can rent or buy a scan tool from the local parts store, but I’m not sure if that’s going to get the job done. What’s the Best obd2 scanner I can get without spending more money than I’d spend at the mechanic in the first place?

Since you have a decent working knowledge of cars, you probably already know that there’s no real substitute for the Car Diagnostic Tools that a professional diagnostic technician has at his or her disposal. Those tools, of course, typically consist of something like a Snap-on MODIS and a whole lot of prior experience diagnosing similar problems. However, technology has come a long way in recent years, and there are definitely ways for a determined do-it-yourselfer to save some money during tough economic times.

A car code reader is one of the simplest car diagnostic tools that you’ll find. These devices are designed to interface with a car’s computer and report trouble codes in a very no-frills sort of way. Cars and trucks that were built prior to 1996 require specific, proprietary OBD-I code readers, and newer vehicles use universal Obd2 codes readers. This type of car code reader is typically inexpensive, and some parts stores and shops will even read your codes for free.

Any car sold in the United States after 1996 uses the OBD-II computer system, so the majority of cars on the road today have this system. Thanks to OBD-II’s standardization and age, lots of tools have been released to work with the system. Because OBD-II defines the connector and protocol, that means you need both a hardware device to interface with the connector and some software to speak the protocol.