SDconnect C4 connection problem- Das fault (1.1) -1.501.9878

SD Connect C4 fails to connect and comes up with the error message:

Das fault (1.1) -1.501.9878

The mux is connecting, with diagnosis computer both by lan cable or wifi ( passed and respond to all self tests), no lcd problems or blocked (!) . The fault comes when das try to initialize the mux green led blinks about 10 sec,and this fault comes no matter is from das standalone or launched from xentry.

Software & install:

xentry 12.2015 , das bin, blacklist fixed etc on a dell d630 appid 253 and ……

Solutions:

You must change IP address in windows.172.29.127.119:

Go into “Control Panel”, “Network Connection”, “Local Network Connection”> right click > properties > choose this one with TCP/IP, select this, chose properties, choose manually ip, and put this ip “172.29.127.119”, mask 255.255.0.0 (as you will get when type ip), rest of field, leave blank.

if it does not work

Try one more time make update of these 2 package.

6-1

V2017.9 Original Software Mercedes Benz MB SD C5 SD Connect Compact 5 Star Diagnosis with Engineer

MB SD Connect Compact 5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.

Xentry Connect C5 Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.

Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?

What are its distinguishing features?
Hardware, despite the similarity of many solutions with multiplexers SDConnect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer
The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the MB STAR Diagnostic Tools diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Package List:
1pc x C5 Multiplexer (new C5 case)
1pc x OBDII 16PIN Cable
1pc x Lan Cable

V2017.9 Original Software Mercedes Benz MB SD C5 SD Connect Compact 5 Star Diagnosis with Engineer

Benz c5 from www.obd2tool.com can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.

C5 Star Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.

Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?

What are its distinguishing features?
Hardware, despite the similarity of many solutions with multiplexers SDConnect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer
The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.

Why should buy Xentry connect
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used MB SD Connect C4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the Mercedes Benz Diagnostic Scanner diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

Package List:
1pc x C5 Multiplexer (new C5 case)
1pc x OBDII 16PIN Cable
1pc x Lan Cable

Why Choose MB SD C4 from obd2tool.com

MB SD C4 was most popular MB Star Diagnostic Tool, MB SD C4 Multiplexer from Aliexpress is much more cheaper than obd2tool.com. As we all know the MB SD C4 request after-sales service more often than other device. Up to now, there are so many MB SD C4 customer who order from Aliexpress different ask for after-sales service. Such as following case:

MB Star Diagnostic SD Connect Compact C4 MB SD Connect C4 Multiplexer

10-1

Obd2tool.com Kindly note:

1.Obd2tool.com only offer free after-sales service within 1 year warranty for the product order from us.

2.We do not free offer technical support for product from other suppliers, due to the quality different, much MB SD C4 multiplexer can only send back to supplier for repair.

3. If Customer need technical support for your Benz diagnostic tool MB SD C4 Multiplexer from Other suppliers indeed, just pay 39usd for each time, then contact Skype:obd2tool02 for technical support.

Why order the MB SD C4 from obd2tool.com?

1. SD Connect Serial Number 100925(obd2tool.com Kindly note: serial number 101923 or 101044 SD CONNECT may be locked when you update firmware?

2. Star Diagnosis SD Connect C4 firmware update available.

3. DAS/XENTRY Software from obd2tool.com have Blask list path can help sd connect C4 mux avoid locked.

4. Full New Chips layout on PCB board which inlud UDS Chips which support scn online coding via dealer account.

5. All SDConnect will be power on and aging than 12 hours, and it will be tested 3 times with Ecus before shipping

20151029010232 57364 Buy MB SD C4 from Aliexpress or Other Online Shop?

6. Obd2tool.com MB SD C4 Mutiplexer have 1 year free warranty, we offer free after-sales service for device from us under warranty.

More question about MB SD C4 Multiplexer from obd2tool.com just feel free to keep your order number to contact us freely. Thanks.

MB Star C3 092015 Xentry cannot work on W204

Mb Star C3 Star diagnostic system failed to work on Mercedes W204? Here is the customer solution. You are at your risk!

Problem:

I have DELL D630 with Xentry 09/2015 and MB Star C3 multiplexer. I have connected many cars (W202, W203, W210, W211, W245, etc) and there is no problem with connection – everything is working like a charm. Some days ago, I have bought W204 C280 from 2007. After I choose model, engine and transmission, and I go to diagnostic I see this:

“The diagnosis application is being started…”

27-1

and few seconds later this:

“Initialization of the multiplexer has failed”

27-2

My Mux is not compatible with W204? I searched few hours without success.

Customer solution:
W204 and X204 is the last Mercedes models which working without some special modifications.
You can try:

First try in toolkit.ini delete line skipcomports=all and set line usecomport=2 then you will see in SDconnect toolkit PartD on display after mux connection.

First save your original file for sure.

Try look into C:\Userdata\Config\Xentry\driver – slave.ini and set there com port which you have used for PartD.

Report:

There was no change because I didn’t restarted system. After restart work perfect.

Your solution work perfectly! Probem solved. Everything is working like a charm.

Obd2tool.com solution:

If you need to deal with newer Mercedes models, better go for MB SD Connect Compact 4 or Mercedes BENZ C5 diagnostic system.

Why MB Star C3 Xentry cannot work on W205 recent Mercedes

User puzzles:

I have installed Xentry 9.2014 in Benz star c3 multiplexer. It works well so far. Now, I need to make diagnosis on mercedes w205 year 12/2014 but It can not communicate with the car. C3 don’t work in all recent cars in xentry but in DAS is ok.

Experienced users’ suggestion:

C3 has many limitation regarding latest vehicles in Xentry.
It can’t diagnose it e.g w205, w212, w222, w906, smart 453 etc.

its glory is already passed unless you deal only with vehicles in DAS.
you have to change to MB SD Connect C4.
C4’s support also officially has been stop since 12-2015.

It is no different even you change folder.
it is different protocol with recent vehicles.

For your w205 (nice car) you can use one of this :
1.sd connect c4
2.MB SD Connect Compact 5

Both good at all new Mercedes Benz models,W222, W221, W212, W203, 211,W 204,W207, W212, GL166, B 246, CLS 218, SLK172 and Smart405, 451, 452, 454

Besides the MB Star diagnosis software c3 and c4 own, sdconnect c4/c5 added three more software: SD Media, Xentry and Smart TAN Code.
SD Media: Video and PDF lessons;
Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars. Xentry software for diagnosing W 204,W207 and W212 which C3 and C4 does not support;
Smart TAN Code: Opened special function in DAS program with Smart cars 405/ 451/452/ 454.Besides, it also opened more special functions, such as engineer mode, remove limitations,etc, which Star C3 and Star C4 do not have.

I have successfully communicated wit my w205 AMG using a MB Star diagnosis SD Connect C4 connect all controllers accessed

2017.07 MB SD Connect C4/C5 software can’t be used normally ?

Recently many customers reflect that when they run MB SD Connect C4/C5, it will ask you to enter user name and serial number. What happen to us ?

QQ图片20170828161720

We help customer to remote control with teamviewer and we found that the hard driver (HDD) was not buy from our company. Customer meet this problem because they try to copy the software from our HDD. Our hard drive is encrypted and not allowed to replicate. A copy of the new hard disk software will appear this problem.
Please don’t copy the software from our Hard drive by yourself. Otherwise your software will lock ! Please contact us by email sales@obd2tool.com if you have any question about MB SD Connect C4/C5.

Link: http://www.obd2tool.com/goods-5197-MB+SD+Compact+4+Super+Engineering+Software+DTS+monaco++plus+Vediamo+V050006+Support+Offline+Programming.html

Why should you buy SD connect C5/C4 with laptop

http://forobd2tool.com/wp-content/uploads/2017/07/1/21-2.jpg

Here list reasons why you should buy a Mercedes diagnostic tool with a laptop together:SD connect Mercedes C5

—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for mb star sd c4 purposes…

—Bought an older Dell D630 laptop with a serial port and plan on buying MB SD Star C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.

Mercedes Star C3 Diagnostic Tools / C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.

—If your ever in the market for a faster SDS laptop, the Dell 630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.

—the HDD that is pre-loaded with the software for sd connect c4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.

—Need to connect directly into a RS232 port without using an interface – this is why I went for the complete system with laptop.

—The software Xentry/ DAS is a bit slow on an old IBM so that it is worth paying a bit extra and getting a Dell D630.

—There is a very specific set of COM ports you must use for it to work. For example you need DAS to be looking at COMx within the VM session, then VMware needs to redirect that to COMx which is a ‘physical’ serial port on your machine.

—It’s probably because it has a real com port. Most laptops these days have just a USB port and things don’t always work right if you’re using a USB to RS-232 converter. You wouldn’t want to brick a component during an update if you’re using USB. The other option would be to get a C4 system, but then they cost more. I think there are a couple other systems out there like IBM that also have real com ports.

—The PART D mux(Benz star c3) is a serial ported mux—that’s the reason for the Dell and IBM older laptops.

—The PART W mux(SD connect C4) is and Ethernet/wifi connected system and that is the reason for use on other laptops—the issue is the operating system currently DAS Xentry only runs on XP.

—Plug and play!! It is more convenient for users because the software for C3/SD C4 diagnostic tool will be pre-installed before delivery.

W220 ESP Variant Codingwith SDconnect C4

http://forobd2tool.com/wp-content/uploads/2017/07/1/20-1.jpg

About: Mercedes w220 ESPmodule Variant Coding, esp. for C1511-005 Coding ErrorVariant Coding is incorrect

Model:2002 Mercedes-Benz w220 s55

What is variant coding:

The variant coding in question is set by using factory data. That factory data is basically what chassis that engine control unit is bolted to. Things like weight of the car, yaw sensor and acceleration sensor parameters, moment arms, etc etc.

Once the engine control unit “learns” its variant coding, it is permanently and irrevocably locked down.

* Mercedes Variant Coding requirement:

Star diagnostic tool (better MB star Compact C4 or Mercedes BENZ C5), ebay or obd2tool.com

A specialized laptop, second-hand ok

Working software, original/crack…both ok

(if you’re newbies, better use a diagnostic bundle, avoid lots of issues)

What is C1511-005 Coding Error:

The ESP module reads the variant coding from the ECU. Once read, its ” soft” locked.

Your trouble code suggests that the ESP module has a variant coding that differs from that of the ECU.

Is this a recent occurrence? Did you perhaps have an third party ECU tune performed? Was the ESP module replaced ? Is the trouble code stored or current ?

How to do W220 ESP Variant Coding correctly:

If you have a STAR diagnostic tool such as SD connect C4, and it sounds like you may, go to the ESP module under

CONTROL UNITS

CHASSIS

ESP

Fault Codes

Select C1511-005

1.to the right it should say CURRENT or STORED

hit F8

It should show you how many time the car has ben started after the code was detected. “0” means the fault is CURRENT, any number greater than 0 the fault should be STORED and past history. The ( obviously ) higher the number of start cycles the longer ago it was.

(If it was a long ago and a stored code, I would clear it and move on. If it is current, you can force a variant locking reset of the ESP module in STAR diagnostic and see if the code returns. If the trouble code returns, that would make it a current and ongoing error. If that turns out to be the case then perhaps the ESP module has gone “breasts skyward”.)

2.Double click C1511-005

Read the pre conditions
hit F3
read the sequence and follow it to (hopefully) force a variant coding re-read/write.

It would seem that the ESP reads the ECU on every start up. Having a bad TCU MAY be contributing to the ECU variant coding being off kilter. I would think there would be some P2000-P2564 series codes displayed for that though.

I have no training as a MB mech/tech and offer this as just a possible direction to proceed in. The ( very ) highly paid professionals at the Dollarship or the ( not so ) highly paid folks at a good independent shop should/would have the final say.