Using MaxiSys MS906 in troubleshooting electrical

5-1

MS906 is based on the Android operating system and is featured with an extensive coverage of OE-level diagnostics at an affordable price. Built with Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), a 32G SSD hard drive and an 8” capacitive HD touch screen, MaxiSys MS906 efficiently provides comprehensive vehicle diagnostics and analysis.

I am a automotive tech by trade and bought this to use in troubleshooting electrical shorts in automobiles. I have used the power probe Autel Scan Tool MS906 in the past but the Autel has one particular feature I was interested in. This has a kinda scope feature that can really be useful when troubleshooting sensors on the fly along with a very bright and easy to read screen as well as a ohm meter it had me curious as to how good it is. So far the MaxiSys MS906 from Obd2tool.com has been very useful and works well , I don’t need a separate meter for certain testing and it has been accurate in testing. I did find a strange operation about it though. When probing a circuit that lets say has ground to it then when activated goes hot , the PS100 shows the circuit go to hot (12volt) but also shows ground as well. Pretty strange but idk if it made to do so. The tool itself seems well built but the cable to me seems a little thin and not as thick if a gauge as the power probe. All in all I think it’s a great tool for the features and price point , I only hope it lasts just as long as I expect or will it fail too soon. I will update in the future as to its durability and operation.

So far i absolutely love it. My fuel gauge worked intermittently and i didnt know if it was the gauge, wiring or sending unit. With this thing you have the option to test the gauge operation. This showed me instantly that the wiring and gauge were ok. It also told me that I had high voltage coming from the sending unit which is an indication its not working. All this without taking anything apart.

Autel MaxiSys MS906 work function better than DS708

As a DIY or an auto technician or repair shop owner it is expected you make wise and guided decisions of which specialized automotive diagnostic and ECU programming tool to settle for.

As I went through the good, the bad and the ugly sides of Autel MaxiSYS ms906 my honest conclusion is that it is best for a mechanic who does not have lots of experience yet in car diagnosing.

MaxiSYS MS906 is an upgrade of MaxiDAS DS708 with added functionalities like android WiFi touch screen, immobilizer key coding, tablet type tool, data logging, read & clear fault codes, diagnose, service, repair, provide all OEM functions and more.  Let’s take a look at those unique features that make ms906 superior to other brands of automotive diagnostic scanners in it’s class.

15-1

Capabilities

This product is a modern automotive Diagnostic Analysis System. Moreover, it has been labeled as the next generation edition of the widely successful DS708. One main advantage is its capability to scan a broad range of automotive related problems.

This range covers for over 80 car manufacturing companies across the globe. Many distinct and unique manufacturers such as Audi, Mercedes-Benz, BMW, Chevrolet, Ford as well as Dodge are all included.

Although Autel MS906 has 2 other versions; MS906BT AND MS906TS, yet it gives the user an opportunity to do a whole lot more than scanning car problems.

For example, this diagnostic scan tool is capable of reprogramming keys if you are in possession of the key code from the particular dealer of a vehicle. It is also capable of resetting many systems from vehicle check engine light to ABS.

I reviewed different types of vehicle Autel Diagnostic; I went through all the pros and cons of each and every one of these tools. I strongly recommend, for small garage owners or beginner automotive technician on a budget the Autel Maxisys ms906.

To summerize this diag gives the technician an opportunity to reprogram selected ECU settings for customer’s automobile. However, the latter feature is solely available for some particular types of models.

Autel Maxidas DS808 vs. Autel DS708 vs. Autel MaxiSYS 906

Basic information comparison table among Autel Ds708 scanner, Autel MaxiSYS MS906Autel DS808 standard package and Autel DS808K full package.

4-1

Autel MS906 Connection Instruction

This is the the guide to help you connect Autel MaxiSYS MS906 with the vehicle via the OBD cable.

10

1- connect the main cable’s 15pin female connector to the BD15 port on the top of the MaxiSys MS906 display tablet.

tighten the captive screws.

2- Connect the 16pin male connector of the main cable to the vehicle’s DTC, which is genrally located under the vehicle dash.

3- power up the display tablet. your MasiSys MS906 is now ready for use as a diagnostic device.

More info:http://www.obd2tool.com/goods-5089-AUTEL+MaxiSYS+MS906+Auto+Diagnostic+Scanner+Next+Generation+of+Autel+MaxiDAS+DS708+Diagnostic+Tools.html

Cummins Inline 6 can communicate with your PC

where to buy cheaper Cummins Diesel Engines diagnostic adapter, China Clone Cummins INLINE 6 for Sale, OEM Cummins Inline 6 kit with all cables and software,  Cummins Inline 6 Data Link Adapter is now the only genuine Cummins product on the market.  From obd2tool.com.

Cummins Inline 6 can communicate with your PC through a 9-pin serial connector. The INLINE 6 also can communicate with your PC over a Universal Serial Bus (USB) through a 4-pin standard connector. The  obd2 scanner INLINE 6 adapter connects to vehicle power, the SAE J1708/J1587 data link, and two CAN/J1939 data links via a 25-pin serial connector.

This Cummins Inline VI is fully compliant to the Technology and Maintenance Council’s RP1210 standard from eobdtool.com. It links vehile computer (SAE J1708/J1587 and 2 CAN/J1939 data links) via a 25-pin serial connector and communicates with a PC through a 9-pin serial or 4-pin USB connector.

2016 Newest Original Autel MaxiSYS MS906 Auto Diagnostic Scanner Next Generation of Autel MaxiDAS DS708 Diagnostic Tools – Press the button below to see more pictures and information. Original AUTEL MaxiSys MS906 Auto Diagnostic Scanner New Generation of MaxiDAS DS708 Update Online with Multi-language – Press the button below to see more pictures and information

Autel MaxiSys MS906 Tablet Troubleshooting

http://www.obd2tool.com/images/upload/image/20160223/20160223072409_81126.jpg

This really is some beneficial recommendations when there’s a thing incorrect with MaxiSYS MS906 tablet at obd2tool.com, which includes battery & charge problem and machine running problem.

1.When the display tablet does not work properly:
Make sure the tablet has been registered online.
Make sure the system software and diagnostic application software are properly updated.
Make sure the tablet is connected to the Internet.
Check all cables, connections, and indicators to see if the signal is being received.

2.When battery life is shorter than usual:
This may happen when you are in an area with low signal strength. Turn off your device if is not in use.

3.When you cannot turn on the tablet:
Make sure the tablet is connected to a power source or the battery is charged.

4.When you are unable to charge the Autel Tools MS906 tablet:
Your charger maybe out of order. Contact your nearest dealer.
You may be attempting to use the device in an overly hot/cold temperature. Try changing the charging environment.
Your device may have not been connected to the charger properly. Check the connector.

NOTE: If your problems persist, please contact Autel’s technical support personnel or your local selling agent.