OBDSTAR X300 PAD2 works with OBDSTAR FCA 12+8 Adapter can be used for all 2018 FCA (Fiat, maserati, Chrysler, Alfa Romeo) vehicles. This article is available with the guide to program 2018 Fiat Doblo by the OBDSTAR devices.
Preparation:
Car: 2018 FIAT Doblo
Device: OBDSTAR X300 DP plus C package+ FCA 12+ 8 adapter
Procedure:
Open OBDSTAR main menu
Select “IMMOBILISER”-> “FIAT”-> “FIAT V32.14”
Initializing diagnostic data…
Press “Pre-Coding”-> “DELPHI 93C86/ NEC (ID46)”-> “INTELLIGENT MODE”
Note: This function is available by connecting the server, please ensure the internet connection is normal.
Click “Read PinCode”
Follow the prompt on the screen to switch ignition on
Read out PinCode: 63433
Return to “INTELLIGENT MODE” and select “Program keys”
Pay attention to the prompt “All keys that could start the cars are going to be programmed, keys that not programmed could not be used anymore (could not go back to program). The new key to be programmed must be a custom key or a predetermined key.”
Turn on ignition
Enter 5-digit PinCode
Turn off ignition
Insert a new key and switch ignition on
Program key is completed
Test the original key and new key successfully
Why need to use OBDSTAR FCA 12+8 Universal Adapter?
All 2018 FCA (Fiat, Chrysler, Alfa Romeo) vehicles are equipped with SGW Safety Gateway modules to prevent anyone access to the vehicle through the OBD2 port using a clone diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.
How to use OBDSTAR FCA 12+8 Universal Adapter?
Step 1: Locate and unplug the 12 PIN& 8 PIN connectors of the SGW module
Step 2: Connect the FCA 12+8 directly to the 12PIN and 8 PIN connector on the car (two connectors connected to the SGW)
Step 3: Achieve normal communication with the car
This is 2018 – Dodge RAM 1500 / 2500 /3500
This is 2018 – Dodge Durango
2018 Jeep Grand Cherokee
This is 2018 Maserati Ghibli SGW location:
Note: Remove the steering wheel guard, at the bottom of steering column
Which car need OBDSTAR FCA 12+8 Universal Adapter?
Fiat: 2018-
Maserati: 2018- Maserati and Ghibli
Chrysler:
2018- Chrysler 300
2018- Chrysler Pacifica
Dodge
2018 – Dodge Challenger
2018 – Dodge Charger
2018 – Dodge Durango
2018 – Dodge Journey
2018- RAM
Jeep:
2018 – Jeep Cherokee
2018 – Jeep Grand Cherokee
2018 – Jeep Compass
2018 – Jeep Wrangler
2018 – Jeep Renegade
Latest X300 DP Plus Update:
(Need FCA 12+8 connector)
– OBDSTAR DP PLUS Maserati [V32.22] IMMO upgrade:
Ghibli 2018- Pincode reading and smart key programming
– Dodge [V30.44] Upgrade:
Increased Charger 2019 cluster calibration
– Jeep [V30.44] Upgrade:
Increased Cherokee 2019 Cluster Calibration
– Maserati [V30.03] upgrade:
Increased Ghibli-95320 Cluster calibration
Enjoy!
Leave a Reply