OBDSTAR X300 DP Plus program 2018 Fiat Doblo Key with FCA 12+8 Adapter

OBDSTAR X300 PAD2 works with OBDSTAR FCA 12+8 Adapter can be used for all 2018 FCA (Fiat, maserati, Chrysler, Alfa Romeo) vehicles. This article is available with the guide to program 2018 Fiat Doblo by the OBDSTAR devices.


Car: 2018 FIAT Doblo
Device: OBDSTAR X300 DP plus C package+ FCA 12+ 8 adapter


Open OBDSTAR main menu

Select “IMMOBILISER”-> “FIAT”-> “FIAT V32.14”


Initializing diagnostic data…

Press “Pre-Coding”-> “DELPHI 93C86/ NEC (ID46)”-> “INTELLIGENT MODE”




Note: This function is available by connecting the server, please ensure the internet connection is normal.

Click “Read PinCode”


Follow the prompt on the screen to switch ignition on

Read out PinCode: 63433


Return to “INTELLIGENT MODE” and select “Program keys”


Pay attention to the prompt “All keys that could start the cars are going to be programmed, keys that not programmed could not be used anymore (could not go back to program). The new key to be programmed must be a custom key or a predetermined key.”


Turn on ignition

Enter 5-digit PinCode

Turn off ignition

Insert a new key and switch ignition on

Program key is completed


Test the original key and new key successfully


Why need to use OBDSTAR FCA 12+8 Universal Adapter?

All 2018 FCA (Fiat, Chrysler, Alfa Romeo) vehicles are equipped with SGW Safety Gateway modules to prevent anyone access to the vehicle through the OBD2 port using a clone diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.

How to use OBDSTAR FCA 12+8 Universal Adapter?

Step 1: Locate and unplug the 12 PIN& 8 PIN connectors of the SGW module

Step 2: Connect the FCA 12+8 directly to the 12PIN and 8 PIN connector on the car (two connectors connected to the SGW)

Step 3: Achieve normal communication with the car

This is 2018 – Dodge RAM 1500 / 2500 /3500


This is 2018 – Dodge Durango

2018 Jeep Grand Cherokee


This is 2018 Maserati Ghibli SGW location:


Note: Remove the steering wheel guard, at the bottom of steering column

Which car need OBDSTAR FCA 12+8 Universal Adapter?

Fiat: 2018-

Maserati: 2018- Maserati and Ghibli


2018- Chrysler 300

2018- Chrysler Pacifica


2018 – Dodge Challenger

2018 – Dodge Charger

2018 – Dodge Durango

2018 – Dodge Journey

2018- RAM


2018 – Jeep Cherokee

2018 – Jeep Grand Cherokee

2018 – Jeep Compass

2018 – Jeep Wrangler

2018 – Jeep Renegade

Latest X300 DP Plus Update:

(Need FCA 12+8 connector)

– OBDSTAR DP PLUS Maserati [V32.22] IMMO upgrade:

Ghibli 2018- Pincode reading and smart key programming

– Dodge [V30.44] Upgrade:

Increased Charger 2019 cluster calibration

– Jeep [V30.44] Upgrade:

Increased Cherokee 2019 Cluster Calibration

– Maserati [V30.03] upgrade:

Increased Ghibli-95320 Cluster calibration


OBD Read BMW B58 ISN on bench using CGDI BMW

Confirmed that CGDI Prog BMW can read BMW B58 ISN via OBD on Bench, B58 DME is usually used on 5 series and 7 series (G chassis) and more used on 3 series (F chassis). This post is available with the whole procedure.

This is all the equipments including CGDI BMW main unit, platform, B58 DME, OBD cable.


Please be informed, what to need are:

1.CGDI BMW with OBD cable.

2.B48 B58 Read ISN authorization




On the car via OBD (has original key)

On the Bench (All keys lost)


Enter CGDI BMW software.

Select ” B48 B58 Read ISN”.


Click on “Wiring diagram” firstly, CGDI BMW is connected to OBD cable and to the platform.


Click on “Identify”, okay, succeed. This is all the engine identification numbers.


Click on “Read ISN”.

For the first time to read B58 ISN, it will take 5 – 10 minutes.

If the platform is already read for many times, it only needs 1-3 minutes.

Read ISN 100% successfully, this is 32bit ISN.


Piwis III V38.050.030 for Porsche 2002-2019 User Manual

Porsche Tester Piwis III V38.050.030 is the solution of Porsche 2002-2019 diagnosis, programming, coding, key programming.

Piwis III V38.050.030 nice features:
Comes with Engineer software
Covers the Porsche 2002 – 2019 year with Doip diagnosis (For the Model after 2017, only Porsche PIWIS Tester III works)
Comes with wiring diagram (the representation of physical connections and layouts of circuits)

Piwis III V38.050.030 test reports:
Diagnosis: confirmed
Programming: confirmed
Coding: confirmed
Control units change:confirmed
Setting codes: confirmed
Program IMMO & Key online:  confirmed

Piwis III V38.050.030 coverage:
All Porsche from 2002 – 2019 year:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011

especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models

Piwis III V38.050.030 Language:

Piwis III V38.050.030 is running with both of High quality Porsche Piwis Tester III & VXDIAG VCX-DoIP Porsche Piwis Tester 3.
with original Driver 240G SSD in one Panasonic CFAX3 Laptop, no need to install after receiving.
packed with Lenovo T440P
ready to Use

PIWIS tester III VS PIWIS tester II:
1. Piwis III is compatible with Piwis II, means III includes all the functions of Piwis II
2.For the Model after 2017, only Porsche PIWIS Tester III can work with.
3. When using PIWIS tester II, after you change the mode to “E” and want to enter to change to other mode you will be disallowed, you need to restart the software.
4. comparing with Piwis II, Piwis III combine the programming and coding menu in one menu.
5. PIWIS tester II has new operation system
6. New DoIP diagnostic technique is based on Ethereum

How does Piwis III V38.050.030 diagnose Panamera 971?

Part 1: Piwis III V38.050.030 dignostics
Part 2: Piwis III V38.050.030 with Engineer software.
Part 3: Piwis III V38.050.030 Wiring diagram
Part 4: Piwis III V38.050.030 Team viewer

Incl. diagnostics, applications, tools and system.


Part 1: Piwis III V38.050.030 diagnostics

Here I connect to the ECU, so I select “Manual model line selection”.


Select Panamera 971 (after 2017)

Porsche Piwis III can diagnose Porsche 911, Boxster, Cayman, Cayenne, Panamera (971 & 970), Macan, 918 Spyder etc.


Select Control unit.


Select “Gateway” and continue.

1) Extended identifications


2) Fault memory


3) Data stream


4). Piwis III V38.050.030 coding and programming.


5). Piwis III V38.050.030 Maintenance / repairs


Part 2: Piwis III V38.050.030 with Engineer software.

Click on “System”, then ” Diagnostics configuration for 991,981, 918, 970, Cayenne from MY11, Macan”


1) Version information


2) Mode option


3) Choose “E” for the engineering version.


Part 3: Piwis III V38.050.030 wiring diagram

Click on “Applications” then “Wiring diagram”.


Choose the Porsche model that you want to know the wiring diagram.


For the Model after 2017, you need Porsche PIWIS Tester III.


You can use the mouse to move the wiring diagram as you like.


Part 4: Piwis III V38.050.030 team viewer


Software version is V38.300.030,Developer mode enabled, PIWS Tester III vehicle coverage up to 2018: 911, Macan, Cayeme, Panamera, Boxter Cayman


How to Enable VXDIAG Porsche Tester III Developer Mode?

Go to System->Diagnostic configuration
Go to Mode tab
Set Operating Mode to E
E= Developer Mode
V= Standard mode for diagnosis


How to Connect Porsche Tester III with Vehicle and PC?


Porsche Piwis III V38.050.030 Using Tips:

Q: Does Porsche Piwis III V37.250.020 have all the functions of Porsche Piwis II?

A: Yes, Porsche Piwis III is compatible Porsche Piwis II, that means III includes all the functions of Piwis II.

Q: Can Piwis II update to Porsche Piwis III V38.050.030?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: How to update Piwis III V38.050.030?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually the software updates 1-2 times per year.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V38.050.030 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.

Q: Why need Piwis III V38.050.030?

A: Because PIWIS II can’t work with the Porsche after 2017 year. Only Piwis III V38.050.030 can .

Q: It program IMMO & Key online?

A: Yes.

Q: Does it support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to active every 15 days.

If you have the online account and want to use our Vxdiag Piwis III, then we can enable the Wifi and you will active the software every 15 days.

Q: Can Piwis III connect to the internet?

A: Yes. It is allowed.


X300 Pro4 key programmer is an all-purpose immobiliser programming device meticulously designed by OBDSTAR for locksmith. The passage mainly introduce the differences of OBDSTAR X300 PRO 4 and OBDSTAR X300 DP PLUS


Package includes:

OD6 DoIP VCI Product comparison

OD6 DoIP VCI multi in one DoIP OE diagnosis is a real DoIP original diagnosis instrument based on DOP, J2534 and more original protocols adaptation under OEMD brand. It not only supports all J2534 protocols, but also takes the lead in realizing perfect and complete DoIP adaptation in the industry, replacing the original diagnosis instrument’s adaptation ability, programming ability, diagnosis and programming speed, stability and original diagnosis. The ability of the instrument has been greatly improved, taking the lead in the industry to replace C6 in an all-round way, and it is also the first comprehensive original diagnostic instrument in the industry to realize all functions of ICOM A2 and VAS6154.  Auto Scanner Tool OD6 has really raised the multi in one and comprehensive original diagnosis instrument to a new benchmark height, which has become the only choice for J2534 and DoIP OE diagnosis tool.

All original software will installed
1. If you select the software installed the hard disk , you can insert the hard disk to your laptop then can use it
Configuration requirements and usage of PC
1.1 Computer hardware requirements: CPU i5/i7; memory: 8g.
1.2 Usage: there are 4 options after power on, which can be selected by the up and down keys, and then click enter to confirm.

2. If you select the software installed the laptop , you can use it directly when you get it
Lenovo T420 Laptop:
Brand: Lenovo
Screen Size:14.0
Memory: 4GB
Memory (RAM): Intel (R) Core(TM) I5-2520M CPU
Type: Laptop/Notebook
Condition: Used
Primary Drive: DVD+/-RW Processor Speed: 2.50GHz
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.


How To Get CAT Caterpillar ET 2010A License Key

Step1: Caterpillar Open Electronic Technician

Get CAT Caterpillar ET 2010A License Key 1


Step 2: Caterpillar Electronic Technican Asks for License
Step 3: Caterpillar ET 2010A Asks for Licensing


Step 4: Copy License Code


Step 5: Open CAT ET Key 2010A


Step 6: Open ” et2k9c.kg”


Step 7: Caterpillar ET 2010A Paste License Code


Step 8: Caterpillar ET 2010A Choose Subscription

Step 9: Caterpillar ET 2010A Copy License Key


Step 10: Caterpillar ET 2010A Copy License Key


Step 11: Paste License Key in The Following Box


Step 12: Click Authorize


Step 13: Caterpillar ET 2010A Copy License Granted


GM MDI GDS2 software Days Remaining Until Lease Expires 1

Update! GM MDI GDS2 software won’t display ” Days Remaining Until Lease Expires 1″ any more now. It will display many days that it won’t be used out.


Before, GM MDI GDS2 software had a problem “Days Remaining Until Lease Expires 1″.

There is an icon on the software desktop, open this icon to follow the operation guide, it will tell how to adjust the time.

How to activate GM MDI GDS2 software?
1. Change computer time/date
1) Run “leasetime” in the computer’s start menu, if GDS2 is pre-installed

2) Click “Stop ALGM Service”, change data and time in “Date” and “Time” column. Make sure the date and time are correctly set.
3) Check and confirm the “Leasetime” is completely consistent with the computer system time, if not same, please change your PC date and time.

4) Select the date and time of the time zone (Your local exact time ).

2.Activate GM MDI GDS2 software
1) Connect your computer with network, browse to:


2) Select user account, then click on “ok”.

3) Press “Continue”
gm-mdi-gds2-software-activation-08 gm-mdi-gds2-software-activation-09

4) Click on “OK” button when the system display new Tech2 version.

5) Click on “OK”.

6) Select “GDS2″ Tab and then press on Run GDS2 button.
7) The system will install JAVA software automatically.

8) After installing the JAVA, the system will automatically lease renewal.
9) After lease renewal, start MDI GDS software, the system will display the new lease the remaining days in the lower-left corner of software program.

That’s all.

Free Download iProg Pro Programmer Software and Installation Steps

Free download 2019 iProg Pro programmer software link:

iProg Pro V77:



iProg + V76:



iProg+ v43 and v55:



iProg Pro V77 installation method is same as v76,you just check how to install v76 is enough for v77 installation.






Iprog+ V76 Win7 installation in 7 steps:

Open the CD, you will see:





View your computer is 32bit or 64bit.


So click on “7z1900-32bit”.



Copy ” iProg+_2019_00001″ and paste it on the desktop.

Right click on ” iProg+_2019_00001″, select “7-zip” to extract.


Have message “Device (iProg+) driver software was not successfully installed”.


Right click on “Computer” -> “Manage” -> “Device Manager”, right click on “iProg universal programmer” then select “Update Driver software”, select the second option.








Open the folder ” iProg+_2019_00001″, click on “iProgPro76”.


Come to iProg 76 menu.



Adapter test

1.iProg clone V76 Airbag 

Read and erase crash to some cars

Read and erase DTC

Repair CFG




2.iProg clone Car functions incl. Car radio, DPF OFF, ECU, IMMO, Key, Mil to KM, PIN ABS, PIN Code Smartra 3, Pincode from the dump v1.0.3, Sensor, Speed Limit etc






iProg+ V79 key copy for Toyota (ID 94, D4).



iProg+ V79 key prepare for Toyota ID67, ID97, D4.




iProg+ V79 key full functions:

Key Auto


Key Copy


Key Moto


Key prepare (Chery, Ford, Kawasaki, Lada, Mazda, Mitsubishi, Renault, Suzuki, Toyota, VAG, Yamaha)


Key trucks


Key unlocker (Honda, Hyundai, Kia, Ladak)



Smart key new adapter:

Add key OBD2


Reset dump Smart -ID box


Reset Smart 128 Key


Reset Smart 40-80 key


Toyota 93c86 smart key DST128


Toyota 93c86 Smart key







Transponder list:



Try to click on “Hitag2”, then “pcf7936_eng.ipr”, then “Read all memory”.



3.iProg+ V76 clone dashboard functions (read km, write a new km on many cars).



Take “Toyota Avensis Denco 93c46.ipr mileage correction for example.






4.Read/write/erase eeprom

Take “93c46 import.ipr” for example.




5.Mcu: Read and write chips, Cover chips Atmel, Fujitsu and microchips, Motorola, Motorola 912EN, NEC v850









6.Others (BLR, CAN, CRC_Cript, Example, Ibutton, sd_unlocker, test…)


Tango Key Programmer Writes Megamos 48 CS Confirmed!

This an original Scorpio-LK Tango Key Programmer help file.

Purpose: write Megamos 48 component security
Component Security in Megamos 48 key

The modern immobilizers of the VAG-group vehicles have such conception as “Component Security” (CS). The CS is an array of 7 bytes length. Its role in a vehicle is to forbid a mixing of electronic units from different cars. In terms of the immobilizer the CS is a “password” that used in couple of the Motor Unit (ECU) and the immobilizer.

The protection scheme includes 3 components that share the CS, they are: ECU


The protection scheme allows the engine to start only in case when the CS is identical in all the three components.

Key and CS

The CS is a part of the Crypto Key and fills its upper area Word9-Word6.

ECU and CS

ECU uses the CS as a password. More modern ECUs contain only 6 bytes of the CS. In this case the CS should be extracted from another devices, for example it may be a dashboard.


The vehicle dashboard usually has a role of an immobilizer. The IMMO always contains all the 7 bytes of the CS.

The Tango key programming tool “Write Component Security 7 Bytes” (Megamos 48 window) helps you to put the CS manually into a transponder.

Example of ECU BOSCH Motronic M7:

ECU dump, eeprom 95040:


The CS has been marked in the blue color.

To write the CS, invoke the tool and type the CS in the window:


Select the vehicle brand and press the Write button.

Temporary the Seat brand is unavailable.

Installing the MDI Manager Software

The following sections provide the information needed to begin using the GM MDI 2 Scan Tool including installing the MDI Manager software, updating the firmware on the device, configuring connection methods, and communicating with the vehicle.

The MDI Manager software is installed on the PC and provides accessto the MDI 2 s located on your network. The MDI Manager must be installed on the PC in order to configure, update and run diagnostic applications targeted for the PC.

Initially you use the MDI Manager software to set up the configuration of each MDI 2.

The MDI Manager is also used to update the firmware on the MDI 2.

Use the following procedure to install the MDI Manager software on your PC.

Visit the TIS2Web/GlobalTISwebsite to determine if a newer version of MDI Manager software is available for your device.

If the software on the website is newer than your PC, download the software to your computer.

If you downloaded the software from the website, double-click the downloaded file and follow the instructions on the screen.

The InstallShield Wizard starts and guides you through the software installation.The InstallShield wizard displays a panel indicating that the program is ready to be installed.

Click Install to proceed with the installation. A progress bar shows the status of the installation. [You can click Cancel if you want to halt the installation process. You are prompted to respond if you are sure you wish to cancel the installation.]Click Finish to complete the installation. The InstallShield Wizard places the MDI Manager icon on your desktop

Setting Up the Car Diagnostic Tool MDI 2 Hardware

Installing Your Wireless Adapter


The wireless adapter must be installed into the MDI 2 before you can use the wireless features.
Use the following procedure to install the wireless adapter into your MDI 2.?
Ensure power is removed from MDI 2.?
Remove the lower boot from the MDI 2.?
Install the wireless adapter into the USB port.?
Replace the lower boot on the MDI 2.


If you have a wireless MDI 2 kit and are planning to use Point-to-Point wireless communication, you must install the second wireless adapter from your kit into the PC.  Use the following procedure to install your wireless adapter into your PC.Identify a USB 2.0 port on your PC that is accessible.  Do not plug wireless adapter into a USB hub.Install the wireless adapter into the PC USB port.  You may have to wait for your PC to install and configure the wireless adapter driver onto your PC.

Reminder: You should use Windows to Safely Eject the wireless adapter before physically removing it from your PC.


Identifying Your MDI 2The MDI 2label is located on the back of the MDI 2. The MDI 2identification number has two parts: a manufacturing code for traceability and a unique serial number. The serial number is used to identify the MDI 2in the MDI Manager software. You will need to refer to this serial number when you are using MDI Manager to configure the MDI 2and perform software updates.

Updating the MDI 2 Software

The MDI 2isshipped from the factory without firmware.Before operating your MDI 2we recommend visiting the TIS2Web/GlobalTISwebsite to see if a newer version of the MDI 2firmware is available for your MDI 2.Your first connection is to the PC where you have installed MDI Manager software. You will need the USB cable to configure your MDI 2using MDI Manager.

Use the following procedure to update the firmware on your MDI 2Select the MDI Manager icon from the PC Desktop.  Before proceeding to the next step, make sure your MDI 2is powered on and the MDI 2is connected to the PC using the USB cable.The MDI 2 will boot in Recovery Mode.(only in factory setup)


When you click on the new MDI 2, the Connect button will change to the Recover button.  Your MDI 2 will be displayed without the serial number when initially connected to MDI Manager.


Select the Recover button to start the update processSelect the Start Update button to install firmware on the MDI 2.Do not unplug the MDI 2from the PC or remove power from the MDI 2during the update process. Select OK to continue.The update process will take about 5minutes to complete. Once the update process is complete the MDI 2will automatically reboot. Wait until you hear the beep from the MDI 2before proceeding to use your MDI 2.

Configuring the MDI 2 Using MDI ManagerIn order to configure a MDI 2to communicate on your network you must connect the MDI 2, via USB, to a PC running MDI Manager software. The MDI Manager icon displayed on the MDI 2 will inform you of the communication method to be used if the <Connect> button is selected

Use the following steps to configure your MDI 2Double-click the MDI Manager icon on your desktop to launch the MDI Manager software.In the MDI Manager software MDI 2Explorer tab, select the MDI 2 in thewindow. Click the Show Details button to see details about the selected MDI 2.

Click the Connect button to connect to the selected MDI 2over USB. The MDI 2is displayed with a green check mark on your display indicating that your MDI Manager software is in control of that MDI 2. Note: If your MDI 2is connected to another networked PC, it will still be detected by the MDI Manager but will not be available for selection.[If your MDI 2is connected via USB to your computer, the MDI Manager functions on all tabs are available; if your MDI 2is not connected viaUSB, the functions on the Network Setup and MDI 2Update tabs are not available.]

Check PC and MDI 2 Software VersionsTypically, the MDI Manager software installed on your PC and the software installed on the MDI 2must have matching versions in order for the MDI 2to operate properly. Use the following steps to check your software versions.

1.Connect the MDI 2 to your computer via USB cable.
2.Double-click the MDI Manager icon on your desktop to launch the MDI Manager software.
3.On the MDI 2 Explorer tab, select your MDI 2 in the window.
4.Click the Show Details button to see the detail view of the selected MDI 2.

The MDI 2 Detailed View window shows the PC S/W Version information for the MDI Manager softwareand the MDI 2firmware Version for the MDI 2as well as available interfaces and IP addresses. If both the MDI Manager software version and the MDI 2software version match, you can use your MDI 2with this PC