Lonsdor K518ISE Adds BMW CAS3++Smart Keys Success

Tested successfully! Lonsdor K518S Key Programmer is able to add a smart key to BMW CAS3++.

Here’s the programming instruction in detail (with images)…

Lonsdor K518ise: Immobilizer – BMW

lonsdor-k518ise-bmw-cas3+-obd-1

Select from type: CAS2/CAS3 series

lonsdor-k518ise-bmw-cas3+-obd-2

lonsdor-k518ise-bmw-cas3+-obd-3

Program key

lonsdor-k518ise-bmw-cas3+-obd-4

Will start to make a dealer key

this can add one key (select blank position)
this can replace the original key (choose non-blank position)
this can generate a key via OBD or K518 slot

lonsdor-k518ise-bmw-cas3+-obd-5

Pls press the Start button once

lonsdor-k518ise-bmw-cas3+-obd-6

CAS part number: *******

CAS type: CAS++

For encrypted CAS. pls use an original key to switch ignition on

Pls back up eeprom data before any operation

Pls contact the dealer when key generation failed

lonsdor-k518ise-bmw-cas3+-obd-7

Lonsdor read out frame number, cas part number, diagnostic code, key tooth code and remote key frequency and ignition
lonsdor-k518ise-bmw-cas3+-obd-8

Reading ram, for about 1 min…
lonsdor-k518ise-bmw-cas3+-obd-9

Remove the key from the ignition switch

For a smart key, take it outside the car

Ok to continue
lonsdor-k518ise-bmw-cas3+-obd-10

Safety checking…

lonsdor-k518ise-bmw-cas3+-obd-11
Reading key information…
lonsdor-k518ise-bmw-cas3+-obd-12

Current CAS key position info: Key 3
lonsdor-k518ise-bmw-cas3+-obd-13

Note: If the key is an original key, pls pre-pro-process it first.

If the key has been programmed but failed, pls do key unlocking and CAS key data restoring first
lonsdor-k518ise-bmw-cas3+-obd-14

It’s a remote key
lonsdor-k518ise-bmw-cas3+-obd-15

Pull K518 key slot to the right and insert the key to program (to identify id the key is legal and to pre-process
lonsdor-k518ise-bmw-cas3+-obd-16

Current key is legal

Generating can be continued
lonsdor-k518ise-bmw-cas3+-obd-17

Pls insert the key for programming into the car slot
lonsdor-k518ise-bmw-cas3+-obd-18
lonsdor-k518ise-bmw-cas3+-obd-19

Writing key data…
lonsdor-k518ise-bmw-cas3+-obd-20

If for a remote of smart key, pls complete following steps:

take away the key from theition switch
re-insert the key into the ignition switch
press the start button

lonsdor-k518ise-bmw-cas3+-obd-21
lonsdor-k518ise-bmw-cas3+-obd-22

If the vehicle cannot be started, or the direction lock shows on the dashboard, pls synch ELV and DME accordingly

Writing key data – completed!
lonsdor-k518ise-bmw-cas3+-obd-21

Job’s done!
lonsdor-k518ise-bmw-cas3+-obd-23
Lonsdor K518 successfully added a CAS3++ smart key!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>