VXDIAG MB SD Connect C6 MB Star C6 Benz Diagnostic Tool with DOIP&AUDIO Function Better than MB STAR C4C5

Original VXDIAG For XENTRY Diagnosis VCI VXDIAG For XENTRY Diagnosis DoIP Pass Through Interface

VXDIAG For XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB STAR C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.

XENTRY Software Show:

VXDIAG-MB-SD-Connect-C6-1 VXDIAG-MB-SD-Connect-C6-2 VXDIAG-MB-SD-Connect-C6-3 VXDIAG-MB-SD-Connect-C6-4

VXDIAG MB SD Connect C6 XENTRY Diagnosis VCI Overview:
Compatible Software: XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP(You must have an account online)
Functions: Star Diagnostic & programming (SCN Coding)(You must have an account online)

VXDIAG MB SD Connect C6 XENTRY Diagnosis VCI Features:
1.VXDIAG For XENTRY Diagnosis VCI can be used for all model series of For Mercedes For Benz vehicles
2.VXDIAG For XENTRY Diagnosis VCI support DoIP, cover more functions during SCN Coding than SD C4/C5
3.VXDIAG For XENTRY Diagnosis VCI functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
4.VXDIAG For XENTRY Diagnosis VCI Diagnosis updates no longer necessary – firmware updates required on rare occasions
5.VXDIAG For XENTRY Diagnosis VCI does not need a power supply unit for external power supply
6.VXDIAG For XENTRY Diagnosis VCI Handy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
7.Engines (All Gasoline & Diesel Systems)
8.Transmissions and Electronic Selector Modules
9.Airmatic and Active Body Control Suspension Systems
10.Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
11.Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
12.Drive Authorisation System
13.Sam (Signal Acquisition) Modules
14.Electronic Ignition System (EIS)
15.Pneumatic System Equipment and ATA functions
16.Air Conditioning / climate control Systems
17.Instrument Cluster
18.Tyre Pressure Control
19.Parktronic System
20.Keyless Go
21.D2b Command & Audio Gateway (D2B and MOST networks)
22.TV Tuner
23.Headlamp Range Adjustment
24.Seat Electronics
25.Rvc, RST & Vario Roof modules
26.Automatic Clutch System ACS
27.M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
28.Assyst & ASSYST + systems

VXDIAG-MB-SD-Connect-C6-6

XENTRY Diagnosis VCI Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

VXDIAG-MB-SD-Connect-C6-7
VXDIAG-MB-SD-Connect-C6-8
VXDIAG-MB-SD-Connect-C6-9
VXDIAG-MB-SD-Connect-C6-10

Notice:

1.If you choose it without laptop,please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.

2.You also can watch more videos to get more technical support from official website:

http://www.vxdiag.net

3.This VXDIAG can/’t support All Key Lost,needs one key at least.

Specification:
Item State
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light,indicate power and status.
Power DC 9V-36V
Consumption 3W
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year

Package list:

Package 1:
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x 500GBhdd

VXDIAG-MB-SD-Connect-C6-11

Package 2:
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x second hand Lenovo T410 laptop (4GB Memory I5 CPU and 500GB HDD)

VXDIAG-MB-SD-Connect-C6-12

Package 3:
1pc x VXDIAG VCX-PLUS
1pc x OBDII Cable
1pc x USB Cable
1pc x new EVG7 Tablet laptop(4GB Memory and 500GB HDD)

VXDIAG-MB-SD-Connect-C6-13

VXDiag MB SD Connect C6 support add more original software in feature, you only need buy authorization from us. Already released original software authorization has:
GM,Ford,Mazda,Toyota,Honda,LandRover,Jaguar,Subaru,Volvo,VW,and Porsche.

VXDIAG-MB-SD-Connect-C6-14

If you need above softwares,please contact us:sales@obd2tool.

MB Star C3 Mercedes Star Diagnostic Tool Review

Mercedes Star Diagnostic Tool Benz Star C3 Experience

Mb Star C3 Mercedes Star Diagnostic Tool work for Benz car & trucks till 2014.12. Compare SD C4 SDConnect Multiplexer, the client prefers to use Benz Star C3 work for old models. Below obd2tool.com share client Mercedes Star Diagnostic Tool Benz Star C3 experience as follow.

Mercedes Star Diagnostic Tool Benz Star C3 Multiplexer

Benz-Star-C3-Experience

Super Star C3 multiplexer MB Star C3 Mercedes Star Diagnostic Tool Review

I am going to keep posting my updates about doing an AAM and SRS module swap in my 01 ML 430 Sport using the Chinese clone Benz star c3 diagnosis tool.

I received my MB Star C3 from Obd2tool.com yesterday and the Dell D620 a day earlier to use for the Benz Star C3. Replacing the hard disk with the one supplied with the Benz Star C3 Multiplexer was a snap. After watching a few videos on YouTube on how to set up the Xentry and Das programs I had them up and running. But then it took me another 3-4 hour of playing and researching online to figure out how to set up the RS232 port to see the Stardiagnos.

At 10:30 last night, and very exhausted it came to life. As I had figured the AAM and SRS modules were completely non-responsive and could not be talked with via the tool.

This morning I ordered a new AAM and with free shipping and $370 it is on its way to my shop. I picked up a SRS module from a wrecked ML in a local junk yard that I hope will work.

I plan on attacking the SRS system this weekend and the AAM next week. I have been working through the Xentry emulator to learn how to properly set up and program these parts today at my desk and think I have it down pretty well. It is pretty simple once you figure out the navigation and menu structure in the DAS system.

So stay tuned and offer a prayer for me that I do not brick any of the components in my truck.

Client need any Mercedes Star Diagnostic just contact us freely.

Opel Antara all keys lost Lonsdor K518ise can do it

Opel-Antara-all-keys-lost-Lonsdor-K518ise-1

Lonsdor K518ISE and Opel Antara all keys lost: possible?

Did you successfully make all keys lost (AKL) to Opel Antara with Lonsdor?

Yes, I made it some time ago

Anyone helps me confirm Antara is listed in Lonsdor?

Antara is supported by the Lonsdor k518ise first release:

OPEL\Remote system\Antara: Program remote, Delete remote

OPEL\IMMO\Select from vehicle\Antara: All keys lost

Does any one made AKL to Antara with Lonsdor K518ise? Car can be started for few times with each key and then turns all off …. chip ID is the same as for both keys

Opel-Antara-all-keys-lost-Lonsdor-K518ise-2
Opel-Antara-all-keys-lost-Lonsdor-K518ise-3
Opel-Antara-all-keys-lost-Lonsdor-K518ise-4

You need to program the keys in one single procedure, it happened to me programming a spare, ended up with two not working. Had to reprogram as AKL. Remote procedure separate.

Good to know: If you don’t have a good success on your Opel or cannot find out the corresponding model in the vehicle menu, had better try “select from type” and maybe you’ll have luck.
Opel-Antara-all-keys-lost-Lonsdor-K518ise-5

Example: A big success with “select from type”

Car: Opel Astra 2013

Immobilizer: select from type, type 1

Read pin codes

Program new keys

Upload images…

Opel-Antara-all-keys-lost-Lonsdor-K518ise-6 Opel-Antara-all-keys-lost-Lonsdor-K518ise-7 Opel-Antara-all-keys-lost-Lonsdor-K518ise-8 Opel-Antara-all-keys-lost-Lonsdor-K518ise-9 Opel-Antara-all-keys-lost-Lonsdor-K518ise-10 Opel-Antara-all-keys-lost-Lonsdor-K518ise-11

Success!

How to use CGDI BMW do “BMW Data Modify” on N20 engine

It is simple to modify BMW N20 engine data with CGDI BMWCG Pro (9S12).

CGDI-BMW-do-BMW-Data-Modify-1

1.N20 engine physical drawing.

CGDI-BMW-do-BMW-Data-Modify-2

2.Read EEPROM data in the engine with CGDI BMW or CGpro (9S12).

CGDI-BMW-do-BMW-Data-Modify-3

3.Go to CGDI BMW “CGDI modify data”, select “N20” first, load a good copy of the data, manually enter the VIN and ISN you want, and save the new data.
CGDI-BMW-do-BMW-Data-Modify-4
CGDI-BMW-do-BMW-Data-Modify-5
CGDI-BMW-do-BMW-Data-Modify-7
CGDI-BMW-do-BMW-Data-Modify-8
CGDI-BMW-do-BMW-Data-Modify-9

4.Write the newly generated data to the engine with CG100 or CGPRO

CGDI-BMW-do-BMW-Data-Modify-10

Done.

2009 Chevrolet HHR key fob program Tech 2 china clone done!

Success! Have tested Tech 2 clone for 2009 Chevrolet HHR key fob!

The detail… Here you go.
Install the GM Tech 2 scan tool
Turn ON the ignition with the engine OFF
Power On the Scan Tool
Hit Enter
Main Menu > F0: DIAGNOSTICS
tech2-Chevrolet-HHR-key-fob-program-1
Vehicle identification – Model Year > (9) 2009
tech2-Chevrolet-HHR-key-fob-program-2
Vehicle identification – Product Type > Passenger Car
tech2-Chevrolet-HHR-key-fob-program-3
Vehicle identification – Product Make > (1) Chevrolet
tech2-Chevrolet-HHR-key-fob-program-4
Vehicle identification – Product Line > A
tech2-Chevrolet-HHR-key-fob-program-5
Diagnostics > F1: Body
tech2-Chevrolet-HHR-key-fob-program-6
tech2-Chevrolet-HHR-key-fob-program-7
Body> F5: Remote Control Door Lock Receiver
tech2-Chevrolet-HHR-key-fob-program-8
tech2-Chevrolet-HHR-key-fob-program-9
Module Setup > F1: Program Key Fobs
tech2-Chevrolet-HHR-key-fob-program-10
Program Key Fobs > F0: Invalidate all key fobs
tech2-Chevrolet-HHR-key-fob-program-11

Instructions:
The procedure will replace the previously programmed key fob with the key fob requiring programming.

(Follow Instructions, if it don’t work repeat entire procedure)
tech2-Chevrolet-HHR-key-fob-program-12

tech2-Chevrolet-HHR-key-fob-program-13

tech2-Chevrolet-HHR-key-fob-program-14

tech2-Chevrolet-HHR-key-fob-program-15
All desired key fobs must be present.

When the first key fob is programmed, the module will erase the rest of the slots.

The module will fill slots until [Done] or [Exit] is selected.

Note: Only select [Start] once. If the procedure is started again, the control module will start over.

Job’s done!

Confirmed! VVDI Key tool tested working fine with CN3 chip

Story goes like this:

Q: Used VVDI Key Tool programmer clone 2013 VW UP perfectly today. Where does the keytool take its tokens from? Does it use bonus points to clone ID48?
A: No you need buy tokens for cloning, however I believe up until Chinese New Year it is free to use copy48 (where tool has authorization for this function)

Q: Anywhere have stock for VVDI ID46 clone transponders?
A: For id46 can use CN3

Q: CN3 no longer works for me after recent updates, is this true for other people?
A: Bad quality CN3

good quality work perfect

Image 1: good quality CN3 chip

vvdi-key-tool-1

Image 2: original Xhorse 46 chip
vvdi-key-tool-2

Finally, I have just tested now and it work fine with CN3 chip.

vvdi-key-tool-3
vvdi-key-tool-4
vvdi-key-tool-5

Lonsdor K518ISE Official Update and Subscription Accouncement

Lonsdor K518ISE Menus are divided into two parts: free menus and subscribed menus.

1.Free menus are free for lifetime.
2. Subscribed menus can be used for free for 90 days. You need to pay for them after the trial period. After the trial period, subscribed menus will not work properly if you don’t pay. And the menus will disappear after updating the device.
A. 365 days is a period and the price is USD600 per period. One year period starts from the day of the trial period finished.
B. Purchase subscription from OBD2TOOL. You can use the menus normally and permanently after payment.
C. Menus which you purchase includes subscribed menus that have been released and that will have been released in one year period.
D. Subscribed menus beyond one year period requires extra payment.

lonsdor-k518-new-update-1 lonsdor-k518-new-update-2

This was my order of GM Tech2 scan tool with TIS2000 software:

This is how GM Tech 2 looks out of the box:

GM-Tech-2-1

Turned on:

GM-Tech-2-2

The following 3 paragraphs are what I mail to obd2tool.com:
I tested device and it works well. Problem is the screen. I believe for return I would have to send back and pay for shipping. This would take a long time and I have work to do using the tool.
Right now I am using a laptop connected so I can see the full screen

GM-Tech-2-3

I would rather do partial refund or try replacing the screen myself.
Will you do a partial refund?
Can you send or help me find a replacement screen?
I have been happy so far with obd2tool.com so far. The price, service and shipping speed was good.
I hope we can reach a positive solution.

Finally, obd2tool.com ship me a new package.

Just want to let you know, I finally took the time to really test out the replacement I was sent and it appears to work perfectly.

One small issue is that I was sent a Car Diagnostic Tool GM PC Card and not a Saab one. I tried to write the GM Card in my laptop to Saab software but I ended up damaging the card. It was my fault. I know that I could have contacted you for help and you would have taken care of me.

I was able to find another Saab Card and get it working so I am very happy now. I do not need any more help.

GM-Tech-2-4

GM-Tech-2-5
GM-Tech-2-6

How to update VVDI2 software & firmware to version 6.1.0

(01-2019) vvdi2 6.1.0 update review with how-to’s: (thanks to Luis Villegas)

VVDI2-software-update-1
VVDI2-software-update-2

I just did the Xhorse VVDI2 programmer (software and firmware) and went fine

only thing I did different was saves as In DESKTOP once download it I close all the windows and ran the installation and overwrite all the old files

VVDI2-software-update-3

I remember it took s while. But mine its working. I just need to learn how to use  also i recall it was not detecting the VVDI2 i had to restart. But yes definitely install.

VVDI2-software-update-4

i updated on the VVDI2 program and selected link 1

VVDI2-software-update-5

Firmware update by the upgrade kit and Software i did by mega

*** 2018-01-07
*** Require firmware V6.1.0

===== VAG V6.1.0 =====
1. Immoprovement for MQB prepare dealer key
a). Support change MQB key ID(support GEKO online),require use VVDI proximity remote
b). Support save synchronize data when make key with working key
c). Support make dealer key with immo data and synchronize data while all key lost
2. VW MQB add new type: Dashboard version 0555, 0556
3. Immoprovement for autodetect VAG immobilizer system
Support some NEC24C32 TFT dashboard
Bugfix

===== BMW V6.1.0 =====
1. ECU /CAS ISN: Bugfix for change ISN for F series
2. FEM/BDC make key: Add new version, support car until 2018.11
3. FEM/BDC backup coding: Add new version, support car until 2018.11
4. Bugfix for MSV70 read ECU synchronize code(2 Bytes)
6. Bugfix

===== Porsche V6.1.0 =====
1. Bugfix

===== PSA V6.1.0 =====
1. Bugfix

===== Transponder Programmer V6.1.0 =====
1. Support generate MQB proximity remote: require use vvdi proximity remote and download latest remote database
2. Improvement for vvdi special transponder
3. Immobilizer data tool: Euro->BMW->motorcycle add new type
4. Immobilizer data tool: Euro->Iveco->Daily 93C56 bugfix
5. Immobilizer data tool: Asia->Isuzu->SX4 TC1762 bugfix
6. Immobilizer data tool: Asia->SAIC->Roewe750 add new type
7. Bugfix

===== Copy 48 (96 bits) V6.1.0 =====
1. Bugfix

===== J2534 V6.1.0 =====
1. Bugfix

===== Online Upate Tool V6.1.0 =====
1. Bugfix

===== Quick Start V6.1.0 =====
1. Bugfix

GM Tech2 Review Reached a positive solution

This was my order of GM Tech 2 Scan Tool with TIS2000 software:

Ship to: United States

This is how GM Tech 2 looks out of the box:

gm-tech2-review-1

Turned on:

gm-tech2-review-2

The following 3 paragraphs are what I mail to obd2tool.com:
I tested device and it works well. Problem is the screen. I believe for return I would have to send back and pay for shipping. This would take a long time and I have work to do using the tool.

Right now I am using a laptop connected so I can see the full screen

gm-tech2-review-3

I would rather do partial refund or try replacing the screen myself.

Will you do a partial refund?

Can you send or help me find a replacement screen?

I have been happy so far with obdii365.com so far. The price, service and shipping speed was good.

I hope we can reach a positive solution.

Finally, obd2tool.com ship me a new package.

Just want to let you know, I finally took the time to really test out the replacement I was sent and it appears to work perfectly.

One small issue is that I was sent a GM PC Card and not a Saab one. I tried to write the GM Card in my laptop to Saab software but I ended up damaging the card. It was my fault. I know that I could have contacted you for help and you would have taken care of me.

I was able to find another Saab Card and get it working so I am very happy now. I do not need any more help.

gm-tech2-review-4

gm-tech2-review-5

gm-tech2-review-6