Different between INPA and ICOM?

INPA just need a OBD II cable with any PC and it can run. Software can be download. The cable cost only $20 USD + cost of a laptop.For a ICOM Scanner, it need a software called ISTA. I know all the bmw model can be used with. The whole system cost around $400 USD + cost of laptop. Anyone know the different between them??? If I am just a user and do some simple work for my E60 M5 (SMG clutch teach-in) , look for error codes. Which one I should buy?

ICOM and GT1 are hardware. GT1 was the previous generation, then came ICOM, and now something called E-NET (I believe).

DIS, ISTA, and INPA are software. DIS was the first generation. ISTA is the replacement for DIS. INPA is software, but was designed for BMW engineer use, not dealerships and most dealerships don’t have it or any clue how to use it. Some of the other guys here can recommend a software set, it seems the place I got mine is no longer selling them either.

ICOM is probably best for me. It does work with 20-pin port “ADS” fully.

Regarding ADS another question/problem came in my mind. Afaik ADS is only supported by Ediabas 6.4.3 and 6.4.7. Is there any advise how to handle this? Or is the only way having 6.4.3 or 6.4.7 installed on one machine and 7.3.0 on another? Is it at all necessary to use a newer version than 6.4.3 of ediabas for newer cars? Currenty I run 7.3.0 because I do not have a ADS interface.

The old EDIABAS is for when using an actual physical ADS interface. Keep using 7.3.0, it will need to be configured as “remote” and you will have to input the IP address of the BMW ICOM A2.You will need 2 tools. iTool Radar to get IP of ICOM and Reserve ICOM (only for when you use INPA, WinKFP, NCSExpert, etc), and EasyConnect for easy configuration of your ediabas.ini file.

Be the first to comment

Leave a Reply

Your email address will not be published.


*