How to solve Autel MaxiSYS ms9o8 ms9o8p cannot work on cars after update

Autel Maxisys Pro Scan Tool are universal full system vehicle diagnostic tool with high quality made by autel company. This is the touch screen scanner, no need PC.

Update:

Autel Maxisys from OBD2TOOL is updated on official website. As this one is the PAD version support WIFI connection, you can directly operate the update process on the pad itself for update. Keep good connection for internet. Once internet is not good, update is not completely and fully, when you use it diagnose the car, then it cannot diagnose car smoothly. For this problem, you need to uninstall the software completely. Then reinstall the software again.

Here is the detailed steps:
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/59.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/60.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/61.jpg
http://forobd2tool.com/wp-content/uploads/2017/03/20170320/62.jpg

Specifications of X-431 Pro

X431 Pro Full System Automotive Diagnostic Tool with Bluetooth/Wifi is newly release automotive diagnostic tool based on mobile technical at OBD2TOOL. Through the Bluetooth communication between vehicle diagnostic connector and variant mobile intelligent terminals, it achieves X431 series full car model and full system vehicle trouble diagnosis.

X431 Pro is a new diagnostic tool release by Launch tech. It composed of an X-431 PRO pad computer, a protection sleeve, a DBScar diagnostic connector and many OBD1 to OBD2 connector. It communicate with your car by DBSCAR connect with bluetooth, it read car DTC and do diagnose function by the X431 Pro Pad computer, it achieves X431 series full car model and full system diagnose function, it can replace X431 Diagun III or X431 IV.Meanwhile, taking advantage of mobile internet, it integrates more application and service, such as creating maintenance data base and case library, providing instant maintenance information, establishing public and private maintenance social circle etc. As a result, it builds a broad vehicle diagnostic community, which helps you to share vehicle maintenance knowledge online, exchange vehicle maintenance experience online and provide vehicle maintenance related service support online. This will be another revolution raised by Launch in the vehicle diagnosis industry.

Vehicles Covered:
Acura, Changan, Daweoo, Gaz, Hafei, Huachen, Jiao, Lexus, Xiali, Xinkai, Benz, Fiat, Holden, Maruti, Opel, Peugeot, Saab, Ssangyong, Tata, Changhe, Flyer, GMSA, Infiniti, Mahindra, Perodua, Proton, Qirui, Tlisuzu, Zhongshun, EOBD2, Euroford, GM, Jaguar, Renault, Smart, Sprinter, USA Ford, VAZ, VW, Changcheng, Dacia, Ford, HaoQing, Jinlong, Liuwei, Rover, ZhongTai, ZhongXing, Bxfiat, HM, Isuzu, Jacty, JPIsuzu, Mazda, Seat, Skoda, Suzuki, BMW, Daihatsu, Mitsubishi, Porsche, Toyota, Volvo, Audi, Chrysler, Citroen, Hyundai, Kia, Lancia, Landrover, Nissan, Romeo and Subaru.

Specifications of X-431 Pro:

1. Apperance
Launch X431 Pro Apperance
launch-x431-pro-update-online-display-1
X431 Pro Main Unit Contain 3 Parts:
A —- X-431 PRO pad computer
B —- Protection sleeve
C —- DBScar diagnostic connector

X431 Pro Pad Computer:
Launch X431 Pro Pad Computer
launch-x431-pro-update-online-display-2
1.Power Key
1) In Off mode, press it to turn on X-431 PRO;
2) In On mode, press it to activate the LCD if the LCD is blank.
3) In On mode, press it to turn off the LCD if the LCD lights up
2. VOLUME +/- key: Used to adjust the volume
3. Earphone jack
4. Rear camera
5. Reset key (Inside the housing)
6. SD card slot
7. Speaker
8. USB port
9. Microphone

X431 Pro DBSCAR Connector:
Launch X431 Pro DBSCAR Connector
launch-x431-pro-update-online-display-3
1. OBD-16 diagnostic connector: To connect to vehicle’s OBD2 DLC.
2. Power indicator: It lights up while plugging the DBScar connector into the vehicle’s DLC.
3. Communication indicator: It will flash once the DBScar connector is communicating with X-431 PRO or it is being reset.
4. Micro USB port: To connect to PC for data transmission or upgrade via USB cable.

X-431 Pro Function and Feature:

1. Full Diagnose Function:
X431 Pro can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special functions etc;
 
2. Connecting by Bluetooth
X431 Pro communication via bluetooth, very easy to use.  X431 Pro Pad computer specially designed for Android platform with clear and user-friendly interface. X431 Pro Pad computer equipped with an exclusive launch x431 for sale X-431 PRO protection sleeve to prevent it from being damaged;

3. Browser:
Built-in Wi-Fi module makes surfing on the internet freely;

4.Settings:
To configure your personalized X-431 PRO through it;

5. Search:
Enables you to locate your target quickly and conveniently;

6. Email:
Allows you to send and receive email. External POP3 or IMAP email account for some common Web email service provider can be added;

7.File Manager:
You can manage the files or downloaded files stored in SD card efficiently;

8. Other Additional Functions:
Alarm, calendar and calculator etc.

9. Applications:
Other android based applications can be customized to install or uninstall.

X431 Pro Parameters:
 
Operating System: Android
CPU: Dual core 1GHz
Battery: 3000mh, rechargeable polymer lithium battery
Standby time: it is subject to the using environment. Generally it can keep working for 4 hours.
Extension memory card: 32G Micro SD(TF) card supported
Memory: 512MB
Storage capacity: 2GB
LCD: 7.0 inch
LCD resolution: 1024X600
Touch screen: 5 points capacitive touch screen
Cameras: 2 mega rear and 0.3 mega front
Wi-Fi: supported
Bluetooth: supported
Working temperature: -10℃ ~ 55℃ (14°F to 131°F)
Storage temperature: -20℃ ~ 70℃ (-4°F to 158°F)

DBSCAR Connector Parameter:

Working voltage: 9 ~15V
Average working current: about 35mA
Standby current: about 25mA
Working temperature: -20 to 55℃ (-4°F to 131°F)
Storage temperature: -30 to 70℃ (-22°F to 158°F)
Storage humidity: <80%
Working humidity: <60%
Net weight: about 26g

X431 Pro Package Contents:

X-431 PRO pad computer
Password envelope
X-431 PRO protection sleeve
DBScar diagnostic connector
OBD II extension cable
Cigarette lighter cable
Power adaptor
USB data cable
Non-16pin connector

Why Renault CAN Clip Diagnostic Interface can’t work

I bought a Renault CAN Clip Diagnostic Interface for my Laguna Grandtur 2003 last Friday from China. I connected two CAN chip with in the same computer. One of the CAN chip can work successfully with 4 LED light on, however the other one did not work and LED light was out(as the following picture shows.)
High Quality Renault CAN Clip Diagnostic Interface With IBM X200T Laptop Full Set Ready To Use
I doubted that if there was something wrong with the second CAN chip? I consulted the technical service for solution.

They informed me that I am not allowed to connect two CAN chips with a computer at the same time because the computer cannot identify them together. But the problem is I did not connect them at the same time. I first installed a CAN chip from www.obd2tool.com and found it worked perfectly. Then I installed another one but it just did not work. They told me the computer can not be compatible with two Renault CAN Clip in the meantime. I was recommended to change another computer for the second chip.

What’s new in VCS 5054A ODIS V2.27:
1 estimated remaining time is displayed for ECU flash operation.
2 Diagnostic protocols contain the disruption of GFF session, extended measurement value, improve,communication ECU watch,
3 Using the hardware diagnostics, hardware diagnostic connection, OS, hotfixes use and submissions of requests for assistance
4 measured value display has been improved.
5 document in GFF is displayed in a separate window.
6 a message box will be displayed at the beginning of the test drive mode.
7 GFF hotfix can be integrated in the diagnostic session.
8 Dangerous message has been modified.
9 stop the diagnostic session may be interrupted.
10 automatic deletion of automatic saving diagnostic protocol after successful transmission.
11 passthru selecting hardware diagnostics has improved.
12 VAS 5054A ODIS software update service was unstable.

VAS 5054a ODIS 3.0.1 / 2.2.4 require to update (fixed)

Some VAS 5054A OKI Chip users complaint that their VAS 5054A ODIS update interface always pops up, and here is the useful solution to turn off the update sreen, which works for ODIS 3.01 or ODIS 2.2.4.

Update – Invoeren van configuratiegegevens…

Met de update kunt u de onderdelen van het Programma bijwerken (Update – Entering configuration data…
The update allows the components of the program Update)

disable-updates-ODIS-3.0.1-1lwwa2u-1024x576

Understandable solutions here offered by experienced users:
make folder like this: “c:\PostSetup\Odis\Trade-Retail\Software\Update\”
now put the file “site.xml” from PostSetup in the update folder
now in ODIS, go to Admin – Verbindungen – Mirror Server 2 – Mirror Server URL you must write “file:/C:/PostSetup”
When ODIS now check for Update no avaible
With every Update like the 6.50.20, you must copy the new site.xml to update folder.
Works 100% with ODIS 2.24 and also works very good with odis 3.0.1 and 3.0.2.

CAN Clip Renault Functions
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Can tool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
8. Antipollution
9. Multimeter

Renault CAN Clip V164 Software
customer who bought this renault can clip on our website before,please hurry to update it asap,the newer version can support more and newer renault cars

The Installation Instructions Of The VAS 5054A ODIS V2.0

I bought VAS 5054A Bluetooth with OK chip from China,I tried tried to install ODIS 2.0 software on many operating systems, including Win 7 32 bit Windows xp 32 bit 43bit win 7 64 bit.Following I share my using experience with you.
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
Insert the VAS 5054A-base CD and click the “steupstart” icon, there will show some windows one by one, you just need to click “INSTALL”->”ACCEPT”->”START”, the progressing bar will show the process of the software installation. When there pop out the window of “End of successful VAS-PC Installation, press “FINISH” and then choose “EXIT”.

Next, you need to install the Java, click the “JavaSetup6″ icon and install it. Then click the “VAG VAS-PC HotFix” icon and finish the installation.

Then, download the adobe reader 7.0 and install it. After that, restart your computer to save the installation settings. When the computer restart, connect the 5054A from www.obd2tool.com to the computer and install the driver. Then turn on the computer desktop, VAS-PC, choose “OK”

Now you can start to set the options and click “Administration” first, choose the “Enter workshop code” in the list of “Select function”. The first group code is the 3 digital, the second group code is the 5 digit and the third group code is 2 lines no more than 60 characters. After you finish the setting, go back to the management interface and select “Vehicle Self-Diagnosis”, then the “On Board Diagnostic(OBD)”, write the vehicle identification Number down, click “OK”. After all these steps, you can see all the systems of the vehicles, you can choose what you want to check the control unit.

vas 5054a oki chip Computer Windows System Requirements:
Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 10GB space for installing VAS 5054A