Free KESS V2 K-TAG K-suite ECU V1.89, V2.06, V2.08, V2.10 software

KESS V2 and K-TAG KSuite ECU Box programmer V1.89, V2.06, V2.08, V2.10 (software version) share the same firmware version V5.001. Obd365 here provides the free software to download for KSuite V1.89, V2.06, V2.08, V2.10 respectively.

1) KESS V2 K-ATG K-suite software V2.10 (no checksum error and tokens free)

K-TAG V2.10 is newest clone and support many protocols (F-series BMW etc) more than 2.06. K-tag k-suite V2.10 adds warning, notice, recommendation, instruction, pinout, etc.
KESS V2 K-TAG
2) KESS V2 K-ATG K-suite software V2.08

3) KESS V2 K-ATG K-suite software V2.06 (500 tokens and no checksum error)

4) KESS V2 K-ATG K-suite software V1.89

KESS V2 K-TAG
How to add K-tag J-Link tokens:
Check the video instruction here:

or the PDF manual here:
http://www.obd2tool.com/goods-2467-KTAG+K-TAG+ECU+Programming+Tool+Master+Version+V206+J-Link+JLINK+Without+Token+Limitation.html

K-TAG/KESS V2 Language: English, German, Spanish, Italian, Portuguese, French
KESS V2 K-TAG
Operating system: Windows XP ONLY (SP2 works better)

Compatible protocol: Line, CAN, EDC17 and MED17 and Ford J1850
K-TAG K-suite support vehicle list:
http://www.obd2tool.com/goods-2467-KTAG+K-TAG+ECU+Programming+Tool+Master+Version+V206+J-Link+JLINK+Without+Token+Limitation.html Technical Support

NOTE: Software upgrade fixes some bugs, so K-suite V1.89, V2.06, V2.08 and V2.10 share the same vehicle coverage because they are built the same firmware.

Some frequently asked question about KESS V2 and K-TAG K-suite?

Q: What is the difference Between KESS V2 and K-TAG?
A: KESS V2 and KTAG share the same software. KESS V2 has OBD function, but Ktag does not have this function.

Q: How to do checksum for Kess V2/K-TAG?
A: After reading the software, Kess v2 will automatically calibrate checksums

Q: Can KESS V2/K-TAG work on truck?
A: KESS V2/K-TAG cannot work on truck, otherwise, will damage the device.

Q: How to solve KESS V2/K-TAG K-suite checksums Error?
KESS V2 K-TAG
Reasons:
1.The Kess K0-TAG can not work on the chip you test
2.The software is not compatible with your computer

Solution:
1. Change another ECU type or chip.
2. Download the software, and then install it on your PC, instead of the K-TAG software in the CD.
Note: Please close all anti-virus software when you download or install the software.

Q: Kess V2 describes “9. Full integration with ECM Titanium” but I didn’t find it has ECM Titanium?
A: The notice means KESS V2 can work with ECM Titanium, does not mean KESS V2 contains ECM Titanium. KESS V2 is an ECU programming tool, and ECM Titanium is a set of programming software for adjusting power.

LAUNCH X431 Automobile Scanner Analysis Instrument – Diagun III LAUNCH

LAUNCH X431 Diagun III is a brand-new specialized LAUNCH X431 crash code reader diagnostic device developed along with formulated by simply LAUNCH. LAUNCH X431 Diagun III is smart, simple to carry, hassle-free to apply, along with it’s the stantechnicians.

X431 Diagun III + LAUNCH DBS automobile diagnostic connector built-in style, LAUNCH X431 Diagun III help support wire along with bluetooth handheld prognosis. Colouring along with feel screen, the procedure is simple along with convenientdard gear intended for storage.

Launch X431 - X-431 DIAGUN III

LAUNCH X431 Diagun III Characteristics

Strong diagnostic characteristics

Handheld prognosis

Trend along with Built-in style

Much better Electric battery procedure

Simple to be able to comparison along with evaluation

A couple of DataStream waveforms may be shown in a screen

Regular gear intended for technicians

Bluetooth engineering. handheld transmission

Really the only diagnostic device LAUNCH X431 Diagun III which will use a couple of automobile on the similar time(patent put on)

Universal sixteen PIN NUMBER connector, combined characteristics off sixteen PIN NUMBER connectors(patent put on)

one Gary storage device

Fully passed down diagnostic characteristics through X431

Greatly much better plan working pace

Easier software update

LAUNCH X431 Diagun III Function:

Prolonged stand-By time period: LAUNCH X431 Diagun III Are available frequently eight a long time.

Distinctive Visual appeal: Coming protect style, the DBScar connector will be built-in.

Help support offline function: LAUNCH X431 Diagun III Help support regular USB printer manufacturer’s intended for making diagnostic consequence.

Speedy Update: Nearly one, 000 software update a year to ensure the characteristics.

Handheld prognosis: Major device can certainly talk to DBScar connector by simply Bluetooth(<100m).

Strong diagnostic: Passed down along with many prognosis function connected with X-431 along with outrageous software insurance coverage, Asian, American along with U. S.

LAUNCH X431 Diagun III Electronics

CPU — four hundred MHz ARM9

Wide Feel Screen — 480X272, several. three -inch LCD

DRAM — 1G

Electric battery — 3800mAh, 10hrs

Built-in very difficult disk— 8G SSD

LAUNCH X431 Diagun III Upgrading/Printer Interface— USB

handheld transmission Modular — Bluetooth

USB — only two USB Vents (USB only two. 0)

LAUNCH X431 Diagun III Software

Procedure procedure — WINCE a few. 0

Identify — Fully inherits through X431

LAUNCH X431 Diagun III Update — Update on the net

User interface optimisation — entering into prognosis desktop specifically immediately after running on, easy to use

English/Metric Conversion process intended for PID Attitudes

Speedy update — nearly thousands of moments each year

Learn additional the most recent LAUNCH X431 facts it is possible to here.

PIWIS II V15.35 is Released

Hello ,dear Customers All

We now have V15.35 for Piwis Tester II, it add new cars and new functions inside .

And if you are interested in , you can contact our Online Chat Support, the customers who bought PIWIS II from our shop, also can contact us for free update.

More details , you can check here>>

Thanks.

 

Here are some pic for your reference :


Porsche Piwis ii tester V15.35
Porsche Piwis ii tester V15.35
Porsche Piwis ii tester V15.35 vehicle list
Porsche Piwis ii tester V15.35
Porsche Piwis ii tester V15.35 vehicle list
Porsche Piwis ii tester V15.35
Porsche Piwis ii tester V14.35 update information
Porsche Piwis ii tester V15.35 update

 

A new Volkswagen Passat airbag fault light alarm

A mileage of about 15,000 km, assembly CEA1.8TSi engine, equipped 0AM 7-speed dual-clutch transmission in 2013 developed new Volkswagen Passat sedan. Users report: auto airbag fault light alarm.

Inspection and evaluation: upkeep workers get started the engine idling and observed fault airbag warning light over the instrument cluster, fault description is consistent using the consumer. Upcoming, use a automobile fault diagnostic vas 5054a checks Gateway installation failures of your record, locate the airbag malfunction. Fault codes and their meanings examine the airbag handle unit, uncovered a fault code B100A1 B, meaning: the front passenger side airbag detonation device resistance worth is too substantial (energetic / static).

Select measurement reading through perform, see the front passenger side airbag igniter resistance and uncovered to eight.6Ω, the current state is high. Meaning by reading the fault code and also the measured value with the state to find out the presence from the front passenger side airbags resistance worth is also high, the attainable reason for the malfunction has an airbag management unit to your harness exists involving virtual access, leading to resistance is too substantial; airbag handle unit and itself is defective.

After a check out circuit, learned to harness the airbag management unit is only one plug connection involving the position of your appropriate front seat suitable in front. If the airbag itself is faulty, unplug see launch x431 iv greater resistance worth of strain. Unplug verify the resistance worth of 5.8Ω, the resistance value decreases, indicating that the airbag itself will not be faulty, the cause could be a problem together with the wiring harness or handle unit.

Airbag manage unit plug pin front passenger side airbag is T50 / four and T50 / 5, T50 / four corresponding wire colour green, T50 / 5 corresponding wire color is white. Driver side airbag stitch T50 / 6 and T50 / seven, the T50 / 4, T50 / five, the wire harness T50 / six and T50 / seven of the handle unit is removed through the plug, T50 / 4 and T50 / 7 harness mutual adjust, T50 / five with T50 / 6 harness interchangeable. Check the front passenger side airbag detonation device resistance is 2.3Ω, driver’s side airbag device detonated resistance is five.3Ω, existing status show thoroughly. While the current state is normal, but the driver’s side and passenger side detonate a device quite distinctive resistance values??, indicating the presence of virtual accessibility harness, manage unit just isn’t faulty. Mainly because fault with the wiring harness transfer, continues to be ruled out right up until the airbag fault itself.

Measuring T50 / 4 pin wiring harness and resistance among T3h / two value of three.5Ω, T50 / five pin harness and resistance involving T3h / 1 is 1Ω. A harness regular resistance worth should be much less than 0.5Ω, indicate the existence of virtual access harness. After the wire harness during the dashboard, visual handle unit close to the wiring digiprog 3 harness will not be restored phenomenon. Apart carpet beneath the appropriate front seat and found the harness has restored phenomenon. Demolition restored harness, located virtual access. Restored harness, measure the resistance worth of 0.5Ω. The airbag handle unit plugs and detonated the gadget plug connection is superior, check the front passenger side on the detonating device resistance is two.3Ω.

Troubleshooting: fix connected wiring harness, troubleshooting.

Multi language vcs Vehicle diagnostic software 2.45 download

VCS scanner software is for vcs vehicle communication interface. VCS diagnostic software 1.45 is multi-language supporting English, Spanish, Chinese(Traditional), Chinese(Simplified), Russian, French.

VCS Interface 2.45 VCS Vehicle Communication Scanner Interface

VCS Interface 1.45 VCS Vehicle Communication Scanner Interface

Here OBD2Repair share with you free download link for vcs scanner software 1.45

vcs scanner software 1.45 download link: http://yunpan.cn/Qp2d9zsXY9mgD

Notes:

1. Be sure to disable/uninstall anti-virus software
Please note, anti-virus software can flag up this product software as having a virus. This is a false positive and is due to the software containing the application file like .exe. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable virus scanner! Our product software is completely safe and virus free and all other virus scanners confirm this.

2. If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please uninstall all files then download again, thanks.

Newest BMW ICOM Software introduction

2015.03 BMW ICOM ISTA-D 3.44.10 ISTA-P 53.5.000 Software HDD

Newest version 2015.03 BMW ICOM ISTA-D 3.44.10 ISTA-P 52.5.000 Software HDD Multi-language With Engineers Programming is BMW develop version software, support full BMW series diagnose and programming.

2015.03 BMW ICOM ISTA-D 3.42.40 ISTA-P52.2002 Software

2015.03 BMW ICOM ISTA-D 3.42.40 ISTA-P 52.3.002 VIN 2014.3.24 Software HDD support multi-language, support engineers programming, with TIS and WDS, this is the newest and best software for BMW ICOM.

BMW ICOM 2015.03 External HDD Fit All Computer For BMW ICOM & ICOM A2

Specifications:
Software version: 2015.03
Software used on: BMW ICOM & BMW ICOM A2
ISTA-D:2.34.0
ISTA-P:48.1.002
VIN: 2012.12.15
Software format: External HDD

Memory,Hard disk 320GB
Run in VWMARE(Virtual Machine)
BMW ICOM Device please check:
http://www.obd2tool.com/goods-4507-2013+New+ICOM+A2+Diagnostic++Programming+For+BMW+ICOM+A2BC.html

New Release VAGCOM V12.12

VAG COM V12.12 includes partial support for VW Crafter vans. Communications with all control modules;functions supported: Control Module ID and Advanced ID, Fault Codes (Read and Clear),Supported Codes, Security Access, and Adaptation. Other functions such as Measuring Values,Output Tests, and Basic Settings will be added in future versions.

New more universal Airbag Coding Assistant.

3.New “Upload Debug/Log File” function in Applications Dialog

4.Completely revised and expanded ROD (ODX) Data.

5.New USB Drivers. Now compatible with the latest PCs which use Fresco Logic USB3

chipsets.

6.Refactored DTC routines which interpret DTC data, including enhanced interpretation of status

byte for DTCs in UDS modules.

7.New area to display additional info for Basic Settings.

8.Added data types 0B, 0D, 0F to Generic OBD-II Mode 9.

9.New version of LCode.

10.Revised and expanded Label Files.

11.Many other small bugs fixed and improvements, as well as everything which was introduced in

Beta Versions 11.2 – 12.10.3. this is Release verison v12.12.0

12. It support Volkswagen to Audi October 2013.

13. automatically change the system time, the software does not expire, permanent and effective

15. Automatically disconnected to prevent the upgrade Brush.

16. VCDS V12.12 with password protection5 At the same time support xp and support WIN7 32 and 64bit.

To buy quality obd2 tool,visit www.obd2tool.com