How to install DRBIII Emulator for Chrysler wiTech Micropod 2 on Windows 7 Pro 32-bit?

The procedure for installing DRBIII Emulator on Windows 7 Pro 32-bit:

1: Start with a fresh install of Windows 7 Pro 32-bit.

 

2: Install all the necessary drivers for your laptop.

 

3: Set the clock to the current date and time. (It didn’t work when set to 01/01/2017)

 

4: Connect to WiFi and performed all necessary Windows Updates.

 

5: Copy the “wiTECH_Install” folder to the desktop.

 

6: Install the provided version Adobe AIR.

 

7: Install the provided version of Java.

 

8: Install wiTECH.

 

9: After you have finished installed everything, when you get popup messages from Windows Firewall to allow or block any applications, click “Allow”.

 

10: When you get a popup for AdobeAIR and Java to update, click cancel and do NOT update either AdobeAIR or Java.

 

11: Open “My Computer” and in the upper left of the window, click on “Organize” and then select “Folder and search options”.

 

12: Click on the “View” tab and under “Hidden files and folders” select the radio button for “Show hidden files, folders and drives”. Also, uncheck the option for “Hide protected operating system files (Recommended)” and then at the top of the window, click the “Apply to Folders” button.

 

13: Navigate to “C:\ProgramData\wiTECH\jserver\data\core\stubs” and you will find three installers.

 

14: Install the DRBIII Emulator stub.

 

15: Wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

 

16: Install the Enhanced DRBIII emulator stub.

 

17: Again, wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

 

18: Install the K-Line stub.

 

19: Again, wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

 

20: Connect the MicroPod2 to the vehicle, then connect it to the computer.

 

21: A popup window will appear to install software. Click “OK”.

 

22: After it finishes, start wiTECH and wait for the screen to show up with the MicroPod2 and IP address of it. You will see a “Launch DRBIII” button in the lower right corner. Ignore it as they do not properly open the emulator.

 

23: Create a shortcut on the desktop and enter the following into the ‘Path” field.

 

24: Disable the LAN and WLAN network connections and never connect to the internet again.

 

25: Click on the shortcut and you’re set! The DRBIII emulator will open and give you the choice to select several different vehicles.

 

Note:Its procedure ONLY work with wiTech MicroPod 2 from obd2tool.com.

 

If you want us to install in the laptop ready for use,you can check the product link:

https://www.obd2tool.com/goods-5282-Chrysler+wiTech+MicroPod+2+With+IBM+X200T+Laptop.html

wiTECH MicroPod II v17.03.10 clone review Dodge Avenger 2014 OK

Just ordered a Chinese clone Chrysler Micropod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from a blog, I put the site below) and online (logged into TechAuthority). Not sure if it will be blacklisted or the firmware will be upgradeable with the next software release, but for now it works fine.

I have also uploaded pictures of the internals for those who are curious.

5-1

5-2

5-3

5-4
The site I am using for this tool:

http://www.obd2tool.com/goods-5172-wiTech+MicroPod+2+for+Chrysler+Diagnostic+Tool.html

This version of Witech (17.03.10) works fine on Windows 7 and Windows 10.
on a 2014 Dodge Avenger just fine.

was able to flash a module update & program a new key with the unit

also, possible to use DRB III Emulator with it, DRB III emulator confirmed working.

So far, happy with this witech MicroPod 2.

www.obd2tool.com

How to install WiTech MicroPod 2 software 17.04.27 on Windows 7?

How to install Chrysler wiTech MicroPod 2 software 17.04.27 on Windows 7?

Step 1: install AdobeAIRInstaller.exe
Step 2: install jre-6u45-windows-i586.exe
Step 3: install wiTECH_Install_17.04.27.exe
Step 4: restart the computer

Pay attention:
The computer date must be set to that day. (The day you install WiTech MicroPod 2 17.04.27)
The computer must be connected to the Internet.
Connect the MicroPod 2 to computer to open the software.
When it pop up registration tips, turn off the software and turn it on  repeatedly then you can use it.

Which MicroPod 2 clone is tested 100% safe to use?
wiTech MicroPod 2
WiTech 17.03.10 OK
WiTech 17.04.27 OK
6-1
Chrysler wiTech MicroPod 2 Best Quality OEM
WiTech 17.03.10 OK
WiTech 17.04.27 Still testing
6-2 6-3

Tips: Difference between Chrysler Micropod II and Chrysler wiTech MicroPod 2 Best Quality OEM
Same: Internet connection OK, Chrysler online programming and diagnosis OK
Different: Chrysler wiTech MicroPod 2 Best Quality OEM is much better than wiTech MicroPod 2’s.
You get what you pay for from Obd2tool.com. Hope it helps my friend!

How to install Chrysler wiTech MicroPod 2 Diagnostic Programming Tool?

WARNING; The computer on the day of the date

1.PC-Based: Requires PC connected to the network

1

2.Run Chrysler wiTech MicroPod 2 CD software as picture

2

3.Firstly, installation AdobeAIRInstaller.exe

3

4.Secondly, installation jre-6u45-windows-i586.exe

4

5. Finally, installation wiTECH_Install_17.03.10.exe

5

6.After successful to install the software, the desktop will appear Chrysler wiTech MicroPod 2 software icon is as follows:

6

7. The specific installation process, please watch the following installation video: