2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate 2017.12 XENTRY:

Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop.

Step2: Select ” SDconnect”
1

Step3: Select ” Configure”.
2

Step 4: Select the icon as picture.
3

4

Step5:
5

Step 6 and 7 :
6

Step 8 , 9 and 10.

7

Step 11: Successful to Activation MB SD Connect C4 C5 MB Star Diagnostic Tools
8

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via sales@obd2tool.com

(Solved)SD connect interface is Saying “please put in batteries”

Problem:

Hello MB star
I just recieved My tablet and it looks and work Very good .
But The sd connect interface is Saying “please put in batteries”
What type of batteries is it ?

Solution:

This problem same to :

MB Star C4 mux display: Favor inserir baterias(Please insert batteries)

Here you go :

1.Please prepare the following tools:

25-1

①— SDconnect multiplexer which need to input the batteries。

②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。

③— 1 unit 108M WIFI Card。

④— Plum screwdriver,Specification:T-20

2.Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.
25-2

2.2 Take out the rubber as below.
25-3

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

3.Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
25-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
25-5

3.3 Insert the batteries. Note the Battery polarity.
25-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
25-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

25-8

4.Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
25-9

4.2 Push it to make it totally connected.
25-10

4.3 Cover the rubber and fix the screws to finish all the work.

25-11

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!
25-12

Note 2:

pls check these picture, you can choose self-diagnosis your MB STAR ScannerSD connect c4

25-13 25-14