Why Renault CAN Clip Diagnostic Interface can’t work

I bought a Renault CAN Clip Diagnostic Interface for my Laguna Grandtur 2003 last Friday from China. I connected two CAN chip with in the same computer. One of the CAN chip can work successfully with 4 LED light on, however the other one did not work and LED light was out(as the following picture shows.)
High Quality Renault CAN Clip Diagnostic Interface With IBM X200T Laptop Full Set Ready To Use
I doubted that if there was something wrong with the second CAN chip? I consulted the technical service for solution.

They informed me that I am not allowed to connect two CAN chips with a computer at the same time because the computer cannot identify them together. But the problem is I did not connect them at the same time. I first installed a CAN chip from www.obd2tool.com and found it worked perfectly. Then I installed another one but it just did not work. They told me the computer can not be compatible with two Renault CAN Clip in the meantime. I was recommended to change another computer for the second chip.

What’s new in VCS 5054A ODIS V2.27:
1 estimated remaining time is displayed for ECU flash operation.
2 Diagnostic protocols contain the disruption of GFF session, extended measurement value, improve,communication ECU watch,
3 Using the hardware diagnostics, hardware diagnostic connection, OS, hotfixes use and submissions of requests for assistance
4 measured value display has been improved.
5 document in GFF is displayed in a separate window.
6 a message box will be displayed at the beginning of the test drive mode.
7 GFF hotfix can be integrated in the diagnostic session.
8 Dangerous message has been modified.
9 stop the diagnostic session may be interrupted.
10 automatic deletion of automatic saving diagnostic protocol after successful transmission.
11 passthru selecting hardware diagnostics has improved.
12 VAS 5054A ODIS software update service was unstable.

VAS 5054a ODIS 3.0.1 / 2.2.4 require to update (fixed)

Some VAS 5054A OKI Chip users complaint that their VAS 5054A ODIS update interface always pops up, and here is the useful solution to turn off the update sreen, which works for ODIS 3.01 or ODIS 2.2.4.

Update – Invoeren van configuratiegegevens…

Met de update kunt u de onderdelen van het Programma bijwerken (Update – Entering configuration data…
The update allows the components of the program Update)

disable-updates-ODIS-3.0.1-1lwwa2u-1024x576

Understandable solutions here offered by experienced users:
make folder like this: “c:\PostSetup\Odis\Trade-Retail\Software\Update\”
now put the file “site.xml” from PostSetup in the update folder
now in ODIS, go to Admin – Verbindungen – Mirror Server 2 – Mirror Server URL you must write “file:/C:/PostSetup”
When ODIS now check for Update no avaible
With every Update like the 6.50.20, you must copy the new site.xml to update folder.
Works 100% with ODIS 2.24 and also works very good with odis 3.0.1 and 3.0.2.

CAN Clip Renault Functions
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Can tool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
8. Antipollution
9. Multimeter

Renault CAN Clip V164 Software
customer who bought this renault can clip on our website before,please hurry to update it asap,the newer version can support more and newer renault cars

The Installation Instructions Of The VAS 5054A ODIS V2.0

I bought VAS 5054A Bluetooth with OK chip from China,I tried tried to install ODIS 2.0 software on many operating systems, including Win 7 32 bit Windows xp 32 bit 43bit win 7 64 bit.Following I share my using experience with you.
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
Insert the VAS 5054A-base CD and click the “steupstart” icon, there will show some windows one by one, you just need to click “INSTALL”->”ACCEPT”->”START”, the progressing bar will show the process of the software installation. When there pop out the window of “End of successful VAS-PC Installation, press “FINISH” and then choose “EXIT”.

Next, you need to install the Java, click the “JavaSetup6″ icon and install it. Then click the “VAG VAS-PC HotFix” icon and finish the installation.

Then, download the adobe reader 7.0 and install it. After that, restart your computer to save the installation settings. When the computer restart, connect the 5054A from www.obd2tool.com to the computer and install the driver. Then turn on the computer desktop, VAS-PC, choose “OK”

Now you can start to set the options and click “Administration” first, choose the “Enter workshop code” in the list of “Select function”. The first group code is the 3 digital, the second group code is the 5 digit and the third group code is 2 lines no more than 60 characters. After you finish the setting, go back to the management interface and select “Vehicle Self-Diagnosis”, then the “On Board Diagnostic(OBD)”, write the vehicle identification Number down, click “OK”. After all these steps, you can see all the systems of the vehicles, you can choose what you want to check the control unit.

vas 5054a oki chip Computer Windows System Requirements:
Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 10GB space for installing VAS 5054A