Which Key Cutting Machine to Cut Toyota TOY40 emergency key

Xhorse key cutting machine is a good choice. We can use Xhorse Condor XC Mini Plus and Xhorse Dolphin XP005 with M2 clamp and we also need rod adapter for the thin key which is only 1.5mm. We can also use the new Xhorse Dolphin XP005L, equipped with M5 clamp, no longer need adapters.

Here is steps to decode and cut key on TOY40 one side key by Xhorse Dolphin XP-005L

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-1

Turn on Dolphin XP005L key cutting machine

Tap vehicle database>> Asia>> Toyota>> TOY40 emergency key (one side key)

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-2

M5 clamp side B tip align 2nd position

Universal M5 can rotate clamp side A to side B easily.

Put the original key on clamp tip align 2nd position

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-3

Press ‘Decode key’ to start decode process

After decoding key successfully, put the new blank key on the M5 clamp and press ‘Cut key’

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-4

Make sure you have selected cutter diameter: 1.5mm

Tap System>> machine parameter>> cutting setting>> cutter diameter: 1.5mm>> Save

Install 1.5mm cutter to the top limited position, then tighten

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-5

Press ‘Cut’ and wait a moment till the process is completed

Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-6
Which-Key-Cutting-Machine-to-Cut-Toyota-TOY40-emergency-key-7

If you want to know more about Xhorse , please visit our website: https://www.obd2tool.com

Be the first to comment

Leave a Reply

Your email address will not be published.


*